Hostname: page-component-77c89778f8-vsgnj Total loading time: 0 Render date: 2024-07-16T19:08:43.462Z Has data issue: false hasContentIssue false

Evaluation and Application of the GPS Code Observable in Precise Point Positioning

Published online by Cambridge University Press:  02 May 2019

Haojun Li
Affiliation:
(College of Surveying and Geo-Informatics, Tongji University, Shanghai, 200092, P. R. China)
Jingxin Xiao
Affiliation:
(College of Surveying and Geo-Informatics, Tongji University, Shanghai, 200092, P. R. China)
Bofeng Li*
Affiliation:
(College of Surveying and Geo-Informatics, Tongji University, Shanghai, 200092, P. R. China)

Abstract

The accuracy of the Global Positioning System (GPS) observable, especially for the code observable, has improved with the development of Global Navigation Satellite System (GNSS) receiver technology. An evaluation of the GPS code observable is presented in this paper, together with a stochastic model for the code and phase observables in Precise Point Positioning (PPP), established using the evaluated results. The results show that the code observables of Leica GNSS receivers are generally better than those of some other brand receivers and the Root Mean Square (RMS) for the code observables of the Leica GRX1200PRO, which includes the multipath effect, reaches 0·71 m, although Coarse/Acquisition (C/A) code observables are tracked. The static positioning of the code observable can reach centimetre level and the convergence time for the JPLM station is just 2·5 hours. The positioning results show that it is difficult to converge the Up direction to the centimetre level, compared with the North and East directions. The results show that static positioning can be correlated with the accumulation characteristic of the error for the code observable, while that that of the kinematic mode can be correlated to the error value. The shortened PPP convergence times verify that the presented stochastic models are effective.

Type
Research Article
Copyright
Copyright © The Royal Institute of Navigation 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Banville, S., Collins, P., Lahaye, F. (2013). GLONASS ambiguity resolution of mixed receiver types without external calibration. GPS Solutions, 17(3), 275282.Google Scholar
Bock, H., Dach, R., Jäggi, A. and Beutler, G. (2009). High-rate GPS clock corrections from CODE: Support of 1 Hz applications. Journal of Geodesy, 83(11), 10831094.Google Scholar
Collins, P. (2008). Isolating and estimating undifferenced GPS integer ambiguities. Proceedings of ION national technical meeting, San Diego, US, 720732.Google Scholar
Dow, J., Neilan, R. and Rizos, C. (2009). The International GNSS Service in a changing landscape of Global Navigation Satellite Systems. Journal of Geodesy, 83(3–4), 191198.Google Scholar
Estey, L.H. and Meertens, C.M. (1999). TEQC: the multi-purpose toolkit for GPS/GLONASS data. GPS Solutions, 3(1), 4249.Google Scholar
Fang, R., Shi, C., Song, W., Wang, G. and Liu, J. (2014). Determination of earthquake magnitude using GPS displacement waveforms from real-time precise point positioning. Geophysical Journal International, 196(1), 461472.Google Scholar
Ge, M., Gendt, G., Rothacher, M., Shi, C. and Liu, J. (2008). Resolution of GPS carrier-phase ambiguities in precise point positioning (PPP) with daily observations. Journal of Geodesy, 82(7), 389399.Google Scholar
Geng, J., Meng, X., Dodson, A.H. and Teferle, F.N. (2010). Integer ambiguity resolution in precise point positioning: method comparison. Journal of Geodesy, 84(9), 569581.Google Scholar
Geng, T., Xie, X., Fang, R., Su, X., Zhao, Q., Liu, G., Li, H., Shi, C. and Liu, J. (2016). Real-time capture of seismic waves using high-rate multi-GNSS observations: Application to the 2015 Mw7·8 Nepal earthquake. Geophysical Research Letters, 43(1), 161167.Google Scholar
Gao, Y. and Shen, X. (2002). A new method for carrier phase based Precise Point Positioning. Navigation, 49(2), 109116.Google Scholar
Hauschild, A. and Montenbruck, O. (2009). Kalman-filter-based GPS clock estimation for near real-time Positioning. GPS Solutions, 13(3), 173182.Google Scholar
Hilla, S. and Cline, M. (2004). Evaluating pseudorange multipath effects at stations in the National CORS Network. GPS Solutions, 7(4), 253267.Google Scholar
Kouba, J. and Héroux, P. (2001). Precise Point Positioning Using IGS Orbit and Clock Products. GPS Solutions, 5(2), 1228.Google Scholar
Kouba, J. (2005). A possible detection of the 26 December 2004 Great Sumatra Andaman Islands earthquake with solution products of the international GNSS service. Studia Geophysica et Geodaetica, 49(4), 463483.Google Scholar
Leick, A., Rapoport, L. and Tatarnikov, D. (2015) GPS satellite surveying, 4th edn. Wiley, New York.Google Scholar
Lannes, A and Prieur, J (2013) Calibration of the clock-phase biases of GNSS networks: the closure-ambiguity approach. Journal of Geodesy, 87(8), 709731.Google Scholar
Laurichesse, D. and Mercier, F. (2007). Integer ambiguity resolution on undifferenced GPS phase measurements and its application to PPP. Proceedings of the 20th international technical meeting of the satellite division of the Institute of Navigation (ION GNSS 2007), 839848.Google Scholar
Leandro, R.F., Santos, M.C. and Langley, R.B. (2011). Analyzing GNSS data in precise point positioning software. GPS Solutions, 15(1), 113.Google Scholar
Li, B., Shen, Y. and Xu, P. (2008). Assessment of stochastic models for GPS measurements with different types of receivers. Chinese Science Bulletin, 53(20), 32193225.Google Scholar
Li, H., Chen, J., Wang, J., Hu, C. and Liu, Z. (2010a), Network based Real-time Precise Point Positioning. Advances in Space Research, 46(9), 12181224.Google Scholar
Li, H., Wang, J., Chen, J., Hu, C. and Wang, H. (2010b). The realization and analysis of GNSS Network based Real-time Precise Point Positioning. Chinese Journal of Geophysics-Chinese Edition, 53(6), 13021307.Google Scholar
Li, H., Chen, J., Wang, J. and Wu, B. (2012). Satellite- and epoch differenced precise point positioning based on regional augmentation network. Sensors, 12(6), 75187528.Google Scholar
Li, H., Xu, T., Li, B., Huang, S. and Wang, J. (2016). A new differential code bias (C1–P1) estimation method and its performance evaluation. GPS Solutions, 20(3), 321329.Google Scholar
Loyer, S., Perosanz, F., Mercier, F., Capdeville, H. and Marty, J.C. (2012). Zero difference GPS ambiguity resolution at CNES-CLS IGS analysis center. Journal of Geodesy, 86(11), 9911003.Google Scholar
Seepersad, G. and Bisnath, S. (2015). Reduction of PPP convergence period through pseudorange multipath and noise mitigation. GPS Solutions, 19(3), 369379.Google Scholar
Shi, J., Yuan, X., Cai, Y. and Wang, G. (2017). GPS real-time precise point positioning for aerial triangulation. GPS Solutions, 21(2), 405414.Google Scholar
Teunissen, P.J.G., Odijk, D. and Zhang, B. (2010). PPP-RTK: results of CORS network-based PPP with integer ambiguity resolution. Journal of Aeronautics, Astronautics and Aviation, 42(4), 223229.Google Scholar
Teunissen, P.J.G. and Khodabandeh, A. (2015). An analytical study of PPP-RTK corrections: precision, correlation and user-impact, Journal of Geodesy, 89(11), 11091132.Google Scholar
Wang, J., Stewart, M. and Tsakiri, M. (1998). Stochastic Modeling for Static GPS Baseline Data Processing. Journal of Surveying Engineering, 124(4), 171181.Google Scholar
Zhang, X., Li, X. and Guo, F. (2011). Satellite clock estimation at 1 Hz for realtime kinematic PPP applications. GPS Solutions, 15(4), 315324.Google Scholar
Zhang, X., Li, P. and Guo, F. (2013). Ambiguity resolution in precise point positioning with hourly data for global single receiver. Advances in Space Research, 51(1), 153161.Google Scholar
Zumberge, J.F., Heflin, M.B., Jefferson, D.C., Watkins, M.M. and Webb, F.H. (1997) Precise point positioning for the efficient and robust analysis of GPS data from large networks. Journal of Geophysical Research, 102(B3), 50055017.Google Scholar