Hostname: page-component-76fb5796d-45l2p Total loading time: 0 Render date: 2024-04-26T05:27:43.681Z Has data issue: false hasContentIssue false
  • English
  • Français

Parametric Study on Bone Screw Designs for Holding Power

Published online by Cambridge University Press:  05 May 2011

C.-K. Chao  and
C.-C. Hsiao
C.-K. Chao*
Affiliation:
Department of Mechanical Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan 10672, R.O.C.
C.-C. Hsiao*
Affiliation:
Nano-Electro-Mechanical-Systems Research Center, National Taiwan University, Taipei, Taiwan 10617, R.O.C.
*
*Professor
**Researcher
Get access

Abstract

Pullout tests of bone screws have been performed on cadaver bones, animal bones or synthetic bones. These materials have been proven to be poor models from experimental observation, giving results with too much variability or difference. The finite element method was used in this study to evaluate the holding power for bone screws subject to the changes of outer diameter, inner diameter, pitch and radiuses of tip and bottom round corner. The displacement control mode was used in a way that 1 mm displacement was applied on the flatness region of bone screw head and the reaction force was then recorded to simulate the ability of pullout force. Numerical results showed that the patterns of tip corner on the bone screw were a deciding factor on the pullout force of bone screw. This study was significant for establishing a good bone-screw FEM model and suggesting important threaded parameters in selecting or manufacturing a bone screw to increase its holding power.

Keywords

Holding powerBone screwPulloutFEM.
Type
Articles
Information
Journal of Mechanics , Volume 22 , Issue 1 , March 2006 , pp. 13 - 18
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Asnis, S. E., Ernberg, J. J., Bostrom, M. P., Wright, T. M., Harrington, R. M., Tencer, A. and Peterson, M., “Cancellous Bone Screw Thread Design and Holding Power,” Journal of Orthopaedic Trauma, 10(7), pp. 462–469 (1996).CrossRefGoogle ScholarPubMed
2.Brown, G. A., McCarthy, T., Bourgeault, C. A. and Callahan, D. J., “Mechanical Performance of Standard and Cannulated 4.0-mm Cancellous Bone Screws,” Journal of Orthopaedic Research, 18(2), pp. 307–312 (2000).CrossRefGoogle ScholarPubMed
3.DeCoster, T. A., Heetderks, D. J., Downey, D. J., Ferries, J. S. and Jones, W., “Optimizing Bone Screw Pullout Force,” Journal of Orthopaedic Trauma, 4(2), pp. 169–174 (1990).CrossRefGoogle ScholarPubMed
4.Eric, R., Gozna, I., Harrington, J., Dennis, M., and Evans, M., “Biomechanics of Musculoskeletal Injury,” Baltimore, Williams & Wilkms (1982).Google Scholar
5.Flahiff, C. M., Gober, G. A. and Nicholas, R. W., “Pullout Strength of Fixation Screws from Polymethylmethacrylate Bone Cement,” Biomaterials, 16(7), pp. 533–536 (1995).CrossRefGoogle ScholarPubMed
6.Muller, M. E., Allgower, M. and Willenegger, H., Manual of Internal Fixation, Springer-Verlag, Berlin (1970).CrossRefGoogle Scholar
7.Schatzker, J., Sanderson, R. and Murnaghan, J. P., “The Holding Power of Orthopedic Screws in VIVO,” Clinical Orthopaedics & Related Research, 108, pp. 115–126 (1975).CrossRefGoogle Scholar
8.Schatzker, J., Home, J. G. and Sumner-Smith, G., “The Effect of Movement on the Holding Power of Screws in Bone,” Clinical Orthopaedics & Related Research, 111, pp. 257–262 (1975).Google Scholar
9.Schatzker, J., Waddell, J. and Stoll, J. E., “The Effects of Motion on the Healing of Cancellous Bone,” Clinical Orthopaedics & Related Research, 245, pp. 282–287 (1989).Google Scholar
10.Thompson, J. D., Benjamin, J. B. and Szivek, J. A., “Pullout Strengths of Cannulated and Noncannulated Cancellous Bone Screws,” Clinical Orthopaedics & Related Research, 341, pp. 241–249 (1997).CrossRefGoogle Scholar
11.Uhl, R. L., “The Biomechanics of Screws,” Orthopaedic Review, 18(12), pp. 1302–1307 (1989).Google Scholar
12.Uhthoff, H. K. and Germain, J., “The Reversal of Tissue Differentiation Around Screws,” Clinical Orthopaedics & Related Research, 123, pp. 248–252 (1977).Google Scholar