Skip to main content Accessibility help

Elastic-Plastic Microcontact Analysis of a Sphere and a Flat Plate

  • J. L. Liou (a1) and J. F. Lin (a2)


The elastic-plastic microcontact model of a sphere in contact with a flat plate is developed in the present study to investigate the effect of surface roughness on the total contact area and contact load. From the study done by the finite element method, the dimensionless asperity contact area, average contact pressure, and contact load in the elastoplastic regime are assumed to be a power form as a function of dimensionless interference (δ/δec). The coefficients and exponents of the power form expressions can be determined by the boundary conditions set at the two ends of the elastoplastic deformation regime. The contact pressures evaluated by the present model are compared with those predicted by the Hertz theory, without considering the surface roughness and the reported model, including the roughness effect, but only manipulating in the elastic regime. The area of non-zero contact pressure is enlarged if the surface roughness is considered in the microcontact behavior. The maximum contact pressure is lowered by the presence of surface roughness if the contact load is fixed. Under a normal load, both the contact pressure and the contact area are elevated by raising the plasticity index for the surface of the same surface roughness.


Corresponding author

* Professor, corresponding author
** Assistant Professor


Hide All
1.Polycarpou, A. A. and Etsion, I., “Static Sealing Performance of Gas Mechanical Seals Including Roughness and Rarefaction Effects,” STLE Tribology Transactions, 41, pp. 531536 (1998).
2.Chang, W. R., Etsion, I. and Bogy, D. B., “Static Friction Coefficient Model for Metallic Rough Surfaces,” ASME Journal of Tribology, 10, pp.5763 (1988).
3.Sayles, R. S., “How Two-and Three-Dimensional Metrology Data Are Being Used To Improve The Tribological Performance and Life of Some Common Machine Elements,” Tribology International, 34, pp. 299305 (2001).
4.Mikic, B., “Thermal Contact Conductance; Theoretical Considerations,” International Journal Heat Mass Transfer, 17, pp. 205214 (1974).
5.Kogut, L. and Etsion, I., “Electrical Conductivity and Friction Force Estimation in Compliant Electrical Connectors,” STLE Tribology Transaction, 43, pp. 816822 (2000).
6.Greenwood, J. A. and Williamson, J. B. P., “Contact of Nominally Flat Surface,” Proceedings of Royal Society of London, Series A, A295, pp.300319(1966).
7.Greenwood, J. A. and Tripp, J. H., “The Elastic Contact of Rough Spheres,” ASME Journal of Applied Mechanics, 34, pp. 153159 (1967).
8.Whitehouse, D. J. and Archard, J. F., “The Properties of Random Surfaces of Significance in Their Contact,” Proceedings of Royal Society of London, Series A, 316, pp. 97121 (1970).
9.Hisakado, T., “Effects of Surface Roughness on Contact between Solid Surfaces,” Wear, 28, pp.217234 (1974).
10.Bush, A. W., Gibson, R. D. and Thomas, T. R., “The Elastic Contact of a Rough Surface,” Wear, 35, pp. 87111 (1975).
11.Bush, A. W., Gibson, R. D. and Keogh, G. P., “Strong Anisotropic Rough Surface,” ASME Journal of Tribology, 101, pp. 1520 (1979).
12.Hertz, H., “On the Contact of Elastic Bodies,” Journal reine und angewandte Mathematik, 94, pp.156171 (1882).
13.Johnson, K. L., Contact Mechanics, Cambridge, Cambridge University (1985).
14.Kogut, L. and Etsion, I., “Elastic-Plastic Contact Analysis of a Sphere and a Rigid Flat,” ASME Journal of Applied Mechanics, 69, pp. 657662 (2002).
15.Lin, L. P. and Lin, J. F., “An Asperity Microcontact Model Developed for the Determination of Elastoplastic Deformation Regime and Contact Behavior,” ASME Journal ofTribology, 127, pp. 666672 (2004).
16.Thomas, T. R., Rough Surfaces, New York, Longman Inc. (1982).
17.Chang, W. R., Etsion, I. and Bogy, D. B., “An Elastic-Plastic Model for the Contact of Rough Surfaces,” ASME Journal ofTribology, 101, pp. 1520 (1987).
18.Tabor, D., The Hardness of Metals, Oxford, Oxford University (1951).
19.Abbott, E. J. and Firestone, F. A., “Specifying Surface Quality—A Method Based on Accurate Measurement and Comparison,” Mechanical Engineering, 55, pp. 569572 (1933).
20.Nuri, K. A. and Halling, J., “The Normal Approach between Rough Flat Surface in Contact,” Wear, 32, pp. 8193 (1975).
21.Zhao, Y., Maietta, D. M. and Chang, L., “An Asperity Microcontact Model Incorporating the Transition From Elastic Deformation to Fully Plastic Flow,” ASME Journal ofTribology, 122, pp.8693 (2000).



Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed