Hostname: page-component-848d4c4894-pftt2 Total loading time: 0 Render date: 2024-05-21T11:35:50.235Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation of Al2O3/Mo nanocomposite powder via chemical route and spray drying

Published online by Cambridge University Press:  31 January 2011

Ming-Hung Lo ,
Feng-Huei Cheng  and
Wen-Cheng J. Wei
Ming-Hung Lo
Affiliation:
Institute of Materials Science and Engineering, National Taiwan University, Taipei, Taiwan 106, Republic of China
Feng-Huei Cheng
Affiliation:
Institute of Materials Science and Engineering, National Taiwan University, Taipei, Taiwan 106, Republic of China
Wen-Cheng J. Wei
Affiliation:
Institute of Materials Science and Engineering, National Taiwan University, Taipei, Taiwan 106, Republic of China
Get access

Abstract

A route to prepare nanometer-sized Mo particulates in Al2O3 was attempted by a combination of solution reactions in molecular scale and forcing precipitation by a spray-drying technique. MoO3 was first dissolved in ammonia water and then added in the slurry with high purity, submicrometer Al2O3 powder. Mixed suspension was spray-dried, and then the dried granules were reduced by hydrogen gas and further hot-pressing to a bulky composite at various temperatures. Dissolution of Mo oxide, adsorption reactions on the alumina surface, and surface potential of alumina particles in homogeneous ammonia suspension were studied. Characterization of the granules, including compactability, flowing properties, surface morphology, grain growth of Mo and Al2O3, and mixing homogeneity, were examined. Homogeneity of the spray-dried granules was determined by the calculation of mixing index and the observation of the microstructure of the sintered body. The existence of intergranular, intragranular, and nanosized Mo particulates within Al2O3 grains was observed by transmission electron microscopy (TEM). All the evidence revealed that homogeneous composites with nanometer-sized Mo had been successfully prepared by this attempt with the proposed chemical roue and following the spray-drying process.

Type
Articles
Information
Journal of Materials Research , Volume 11 , Issue 8 , August 1996 , pp. 2020 - 2028
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Niihara, K., Nakahria, A., Uchiyama, T., and Hirai, T., Fracture Mechanics of Ceramic #7, edited by Bradt, R.C., Evans, A.G., Hasselman, D. P. H., and Lange, F. F. (Plenum Press, New York, 1986), p. 103.CrossRefGoogle Scholar
2.Niihara, K., Nakahria, A., Sasaki, G., and Hirabayashi, M., in Proceedings of MRS Meeting on Advanced Materials (Plenum, Tokyo, 1988), p. 129.Google Scholar
3.Niihara, K., J. Ceram. Soc. Jpn. 99, 974 (1991).Google Scholar
4.Niihara, K., J. Jpn. Powder and Powder Metall. 37, 348 (1990).CrossRefGoogle Scholar
5.Niihara, K., Izhai, K., and Kawakami, T., J. Mater. Sci. 9, 112 (1990).Google Scholar
6.Niihara, K., Izaki, K., and Nakahira, A., J. Jpn. Soc. Powder and Powder Metall. 37, 352 (1990).Google Scholar
7.Niihara, K., J. Ceram. Soc. Jpn., Int. Ed. 99, 945 (1991).CrossRefGoogle Scholar
8.Breval, E., Deng, Z., Chiou, S., and Pantano, C. G., J. Mater. Sci. 27, 1464, (1992).CrossRefGoogle Scholar
9.Jange, H. M., Moon, J.H., and Jang, C. W., J. Am. Ceram. Soc. 75 (12), 3369 (1992).CrossRefGoogle Scholar
10.Hu, C. L. and Rahaman, M.N., J. Am. Ceram. Soc. 75 (8), 2206 (1992).Google Scholar
11.Nawa, M., Sekino, T., and Niihara, K., J. Mater. Sci. 29, 3185 (1994).CrossRefGoogle Scholar
12.Hogg, R., Am. Ceram. Soc. Bull. 60 (2), 206 (1981).Google Scholar
13.Wei, W. C., Lu, S. J., and Yu, B. K., J. Europ. Ceram. Soc. 15, 155 (1995).CrossRefGoogle Scholar
14.Derjaguin, B. and Landau, L., Acta Physicochim. 14, 633 (1941).Google Scholar
15.Verwey, E. and Th., J.Overbeek, G., in Theory of the Stability of Lyophobic Colloids (Elsevier, Amsterdam, 1948), p. 625.Google Scholar
16.Lide, D. R., in Handbook of Chemistry and Physics, 72nd ed. (CRC Press, Inc., Boston, MA, 1991–1992), pp. 4–76.Google Scholar
17.Lukasiewicz, S. J., J. Am. Ceram. Soc. 72 (4), 617 (1989).Google Scholar
18.Houalla, M., Kibby, C. L., Petrakis, L., and Hercules, D. M., J. Catal. 83, 50 (1983).Google Scholar
19.Luthra, N. P. and Cheng, W-C., J. Catal. 107, 154 (1987).Google Scholar
20.Jeziorowski, H. and Knozinger, H., J. Phys. Chem. 83, 1166 (1979).Google Scholar
21.Vordonis, L., Spanos, N., Koutsoukos, P. G., and Lycourghiotis, A., Langmuir 8, 1736 (1992).Google Scholar
22.Spanos, N. and Lycourghiotis, A., J. Catal. 147, 57 (1994).CrossRefGoogle Scholar
23.Spanos, N. and Lycourghiotis, A., J. Chem. Soc., Faraday Trans. 89 (22), 4101 (1993).Google Scholar
24.Spanos, N. and Lycourghiotis, A., Langmuir 10, 2351 (1994).CrossRefGoogle Scholar
25.Reed, J. S., in Principles of Ceramic Processing (John Wiley / Sons Inc., Singapore, 1989), p. 280.Google Scholar
26.Cullity, B. D., in Elements of X-ray Crystallography, 2nd ed. (Addision-Wesley, Reading, MA, 1978), p. 102.Google Scholar