Hostname: page-component-8448b6f56d-wq2xx Total loading time: 0 Render date: 2024-04-19T05:35:27.469Z Has data issue: false hasContentIssue false
  • English
  • Français

Optical second-order nonlinearity of transparent glass-ceramics containing BaTiO3 precipitated via surface crystallization

Published online by Cambridge University Press:  31 January 2011

Aiko Narazaki ,
Katsuhisa Tanaka  and
Kazuyuki Hirao
Aiko Narazaki
Affiliation:
Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Sakyo-ku, Kyoto 606–8501, Japan
Katsuhisa Tanaka
Affiliation:
Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Sakyo-ku, Kyoto 606–8501, Japan
Kazuyuki Hirao
Affiliation:
Department of Material Chemistry, Graduate School of Engineering, Kyoto University, Sakyo-ku, Kyoto 606–8501, Japan
Get access

Abstract

Second-harmonic generation of transparent glass-ceramics containing BaTiO3 crystalline phase was investigated using Maker fringe method. When 15BaO · 15TiO2 · 70TeO2 glass was heat-treated at 415 °C for 0.5–12 h, (101)- or (110)-oriented BaTiO3 crystals precipitated in the near-surface region. The resultant glass-ceramics exhibit second-harmonic generation. Variation of second-harmonic intensity with angle of incidence, i.e., the Maker fringe pattern changes drastically with an increase in heat treatment time and temperature. No second-harmonic signal was detected in glass-ceramics derived from 15SrO · 15TiO2 · 70TeO2 glass. These facts suggest that BaTiO3 crystal is responsible for the second-order nonlinear phenomenon, although its structure is closer to cubic than tetragonal according to x-ray diffraction measurements. In order to estimate second-order nonlinear optical coefficient d(2), Maker fringe patterns of the BaTiO3-containing glass-ceramics were analyzed. For the glass-ceramic after heat treatment for 0.5 h, d33 and thickness of BaTiO3-crystallized layer, L, are 3.65 pm/V and 3.43 μm, respectively. The value of second-order nonlinear optical coefficient is comparable to those of BaTiO3 films prepared via metalorganic chemical vapor deposition and pulsed-laser deposition. On the other hand, the glass-ceramic heat-treated for 12 h exhibits d15 = 0.31 pm/V and L = 300 μm. The thickness of the layer active in second-order nonlinearity evaluated from the Maker fringe pattern is coincident with the observation by scanning electron microscopy.

Type
Articles
Information
Journal of Materials Research , Volume 14 , Issue 9 , September 1999 , pp. 3640 - 3646
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Kao, Y-H., Hu, Y., Zheng, H., Mackenzie, J.D., Perry, K., Bourhill, G., and Perry, J.W., J. Non-Cryst. Solids 167, 247 (1994).CrossRefGoogle Scholar
2.Ding, Y., Miura, Y., and Osaka, A., J. Mater. Res. 11, 495 (1996).CrossRefGoogle Scholar
3.Ding, Y., Osaka, A., Miura, Y., Toratani, H., and Matsuoka, Y., J. Appl. Phys. 77, 2208 (1995).CrossRefGoogle Scholar
4.Tanaka, K., Kuroda, H., Hirao, K., and Soga, N., in Solid-State Chemistry of Inorganic Materials, edited by Davies, P.K., Jacobson, A.J., Torardi, C.C., and Vanderah, T.A. (Mater. Res. Soc. Symp. Proc. 453, Pittsburgh, PA, 1997), p. 271.Google Scholar
5.Tanaka, K., Kuroda, H., Narazaki, A., Hirao, K., and Soga, N., J. Mater. Sci. Lett. 17, 1063 (1998).CrossRefGoogle Scholar
6.Komatsu, T., Tawarayama, H., and Matusita, K., J. Ceram. Soc. Jpn. 101, 48 (1993).CrossRefGoogle Scholar
7.Maker, P.D., Terhune, R.W., Nisenoff, M., and Savage, C.M., Phys. Rev. Lett. 8, 21 (1962).CrossRefGoogle Scholar
8.Dubey, A. and Sen, P., Solid State Commun. 105, 739 (1998).CrossRefGoogle Scholar
9.Uchino, K., Sadanaga, E., and Hirose, T., J. Am. Ceram. Soc. 72, 1555 (1989).CrossRefGoogle Scholar
10.Park, Y., Knowles, K.M., and Cho, K., J. Appl. Phys. 83, 5702 (1998).CrossRefGoogle Scholar
11.Layton, M.M. and Smith, J.W., J. Am. Ceram. Soc. 58, 435 (1975).CrossRefGoogle Scholar
12.Jerphagnon, J. and Kurtz, S.K., J. Appl. Phys. 41, 1667 (1970).CrossRefGoogle Scholar
13.Narazaki, A., Tanaka, K., Hirao, K., and Soga, N., J. Appl. Phys. 85, 2046 (1999).CrossRefGoogle Scholar
14.Bihari, B., Kumar, J., Stauf, G.T., Buskirk, P.C.V, and Hwang, C.S., J. Appl. Phys. 76, 1169 (1994).CrossRefGoogle Scholar
15.Okada, T., Nakata, Y., Kaibara, H., and Maeda, M., Jpn. J. Appl. Phys. 34, L1536 (1995).CrossRefGoogle Scholar