Hostname: page-component-77c89778f8-gq7q9 Total loading time: 0 Render date: 2024-07-20T07:08:15.647Z Has data issue: false hasContentIssue false

The effect of Zn(OH)2 addition on the electrode properties of nickel hydroxide electrodes

Published online by Cambridge University Press:  31 January 2011

J. Chen
Affiliation:
Institute for Superconducting & Electronic Materials, University of Wollongong, Wollongong, New South Wales 2522, Australia
D. H. Bradhurst
Affiliation:
Institute for Superconducting & Electronic Materials, University of Wollongong, Wollongong, New South Wales 2522, Australia
S. X. Dou
Affiliation:
Institute for Superconducting & Electronic Materials, University of Wollongong, Wollongong, New South Wales 2522, Australia
H. K. Liu
Affiliation:
Institute for Superconducting & Electronic Materials, University of Wollongong, Wollongong, New South Wales 2522, Australia
Get access

Abstract

Nickel hydroxide powders currently used in the positive electrode of nickel-metal hydride (Ni–MH) batteries require cobalt or cobalt oxides to make them viable and attractive. As a step to eliminate the cobalt-containing materials, spherical nickel hydroxide powders coprecipitated with Zn(OH)2 were prepared by a spraying technique. These powders, which have a higher tapping density and a much smaller pore volume than conventional powders, were used as the active materials of nickel hydroxide electrodes. The effects of the Zn(OH)2 additions on the electrode properties, such as percentage utilization and cycle life, were studied, and the relationship between the electrode performance and the formation of γ–NiOOH was investigated. The cycle life was increased because there was less electrode swelling due to much reduced formation of γ–NiOOH.

Type
Articles
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Sakai, T., Matsuoka, M., and Iwakura, C., Handbooks on Physics and Chemistry of Rare Earth Metals, edited by Gschneidner, K. A. Jr, and Eyring, L. (Elsevier Science, New York, 1995), Vol. 21, p. 133.Google Scholar
2.Brown, J. T. and Klein, M. G., Proc. 12th Annual Battery Conference on Applications and Advances, compiled by Frank, H. A. and Seo, E. T. (IEEE 97TH8226, New York, 1997), p. 33.Google Scholar
3.Singh, D., J. Electrochem. Soc. 145, 116 (1998).CrossRefGoogle Scholar
4.Oshitani, M., Watada, M., Tanaka, T., and Iida, T., Hydrogen and Metal Hydride Batteries, edited by Bennett, P. D. and Sakai, T. (The Electrochem. Soc. Inc., Proc. 94–27, 1994), p. 303.Google Scholar
5.Hasegawa, K., Ohnishi, M., Oshitani, M., Takesima, K., and Matsumaru, Y., Z. Phys. Chem. 183, 1365 (1994).CrossRefGoogle Scholar
6.Zimmerman, A.H., Power Sources 12, edited by Keily, T. and Baxter, B.W. (Taylor and Francis Ltd., England, 1988), p. 235.Google Scholar
7.Oshitani, M., Hasegawa, K., and Yufu, H., U.S. Patent 4,985,318 (1992).Google Scholar