Skip to main content Accessibility help
×
Home

Depth-sensing indentation tests in studying plastic instabilities

  • N.Q. Chinh (a1), J. Gubicza (a1), Zs. Kovács (a1) and J. Lendvai (a1)

Abstract

This review surveys the phenomenon of plastic instabilities occurring in depth-sensing indentation measurements. Investigations presented focus on the characterization of Portevin–Le Châtelier type instabilities observed in different metal alloys during indentation. The effect of some important factors such as solute concentration, the formation of Guinier–Preston zones, and grain size and orientation are described and discussed. The phenomenon of plastic instabilities as serrated flow recently observed in bulk metallic glasses is also briefly reviewed.

Copyright

References

Hide All
1.Lawn, B.R. and Howes, V.R., J. Mater. Sci. 16, 2745 (1981).
2.Sakai, M., Acta Metall. Mater. 41, 1751 (1993).
3.Cook, R.F. and Pharr, G.M., J. Hard. Mater. 5, 179 (1994).
4.Giannakopoulos, A.E., Larsson, P.L. and Vestergaard, R., Int.J. Solids Struct. 31, 2679 (1994).
5.Larsson, P.L., Giannakopoulos, A.E., Söderlund, E., Rowcliffe, E. and Vestergaard, R., Int. J. Solids Struct. 33, 221 (1996).
6.Cheng, Y.T. and Cheng, C.M., Appl. Phys. Lett. 73, 614 (1998).
7.Venkatesh, T.A., Van Vliet, K.J., Giannakopoulos, A.E. and Suresh, S., Scr. Mater. 42, 833 (2000).
8.Pethica, J.B., Hutchings, R. and Oliver, W.C., Philos. Mag. A 48, 593 (1983).
9.Atkinson, M., J. Mater. Res. 10, 2908 (1995).
10.Mencik, J. and Swain, M.V., J. Mater. Res. 10, 1491 (1995).
11.Nix, W.D. and Gao, H., J. Mech. Phys. Solids 46, 411 (1988).
12.Hector, L.G. and Schmid, S.R., Wear 215, 247 (1998).
13.Schmid, S.R. and Hector, L.G., Wear 215, 257 (1998).
14.Zeng, K. and Chiu, C-h., Acta Mater 49, 3539 (2001).
15.Krell, A. and Schadlich, S., Mater. Sci. Eng. A 307, 172 (2001).
16.Chinh, N.Q., Csikor, F., Kovács, Zs. and Lendvai, J., J. Mater. Res. 15, 1037 (2000).
17.Ma, X., Yoshida, F. and Shinbata, K., Mater. Sci. Eng. A 344, 296 (2003).
18.Fröhlich, F., Grau, P. and Grellmann, W., Phys. Status Solidi (a) 42 79 (1977).
19.Gubicza, J., Juhász, A., Tasnádi, P., Arató, P. and Vörös, G., J. Mater. Sci. 31, 3109 (1996).
20.Gubicza, J., Juhász, A. and Lendvai, J., J. Mater. Res. 11, 2964 (1996).
21.Gubicza, J., Juhász, A., Arató, P., Szommer, P., Tasnádi, P. and Vörös, G., J. Mater. Sci. Lett. 15, 2141 (1996).
22.Pharr, G.M., Oliver, W.C. and Brotzen, F.R., J. Mater. Res. 7, 613 (1992).
23.Oliver, W.C. and Pharr, G.M., J. Mater. Res. 7, 1564 (1992).
24.Brotzen, F.R., Int. Mater. Rev. 39, 24 (1994).
25.Pool, W.J., Ashby, M.F. and Fleck, N.A., Scr. Mater. 34, 559 (1996).
26.Bucaille, J.L., Stauss, S., Felder, E. and Michler, J., Acta Mater. 51, 1663 (2003).
27.Li, Z., Cheng, Y.T., Yang, H.T. and Chandrasekar, S., Surf. Coat. Technol. 154, 124 (2002).
28.Wolf, B., Swain, M., Kempf, M. and Paufler, P., J. Mater. Sci. 35, 723 (2000).
29.Pharr, G.M., Oliver, W.C. and Clarke, D.R., Scr. Metall. 23, 1949 (1989).
30.Stone, D.S. and Yoder, K.B., J. Mater. Res. 9, 2524 (1994).
31.Hainsworth, S.V., McGurk, M.R. and Page, T.F., Surf. Coat. Technol. 102, 97 (1998).
32.Berasategui, E.G. and Page, T.F., Surf. Coat. Technol. 163–164, 491 (2003).
33.Bérces, G., Chinh, N.Q., Juhász, A. and Lendvai, J., Acta Mater. 46, 2029 (1998).
34.Bérces, G., Chinh, N.Q., Juhász, A. and Lendvai, J., J. Mater. Res. 13, 1411 (1998).
35.Chinh, N.Q., Németh, G., Fekete, A. and Lendvai, J., Alum. Alloys 2, 621 (1998).
36.Chinh, N.Q., Csikor, F., Gy. Bérces, and J. Lendvai, Alum. Alloys 2, 979 (1998).
37.Chinh, N.Q., Csikor, F. and Lendvai, J., Mater. Sci. Forum 331–337, 1007 (2000).
38.Kovács, Zs., Chinh, N.Q. and Lendvai, J., J. Mater. Res 16, 1171 (2001).
39.Chinh, N.Q., Horváth, Gy., Kovács, Zs. and Lendvai, J., Mater. Sci. Eng. A 324, 219 (2002).
40.Kovács, Zs., Chinh, N.Q., Lendvai, J. and Vörös, G., Mater. Sci. Eng. A 325, 255 (2002).
41.Kovács, Zs., Chinh, N.Q., Lendvai, J., Horita, Z. and Langdon, T.G., Mater. Sci. Forum 396–402, 1073 (2002).
42.Kovács, Zs., Fátay, D., Nyilas, K., Nyilas, K. and Lendvai, J., J. Eng. Mater. Technol 124, 23 (2002).
43.Neuhäuser, H. and Schwink, C. in Materials Science and Technology, edited by Mughrabi, H. (VCH, Weinheim, Germany, 1993), Vol. 6, p. 191.
44.Bréchet, Y.J.M., Key Eng. Mater 103, 21 (1995).
45.McCormick, P.G., Scr. Metall. 15, 441 (1982).
46.Thevenet, D., Mliha-Touati, M. and Zeghloul, A., Mater. Sci. Eng. A 266, 175 (1999).
47.Penning, P., Acta Metall. 20, 1169 (1972).
48.McCormick, P.G., Acta Metall. 20, 351 (1972).
49.Kubin, L.P. and Estrin, Y., Acta Metall. 38, 697 (1990).
50.Bréchet, Y. and Estrin, Y., Acta Metall. 43, 955 (1995).
51.Kok, S., Bharathi, M.S., Beaudoin, A.J., Fressengeas, C., Ananthakrishna, G., Kubin, L.P. and Lebyodkin, M., Acta Mater. 51, 3651 (2003).
52.Král, R., LukáČ, P., LukáČ, P. and JaneČek, M., Mater. Sci. Forum 217–222, 1025 (1996).
53.Pink, E. and Grinberg, A., Acta Metall. 30, 2153 (1982).
54.Cottrell, A.H., Philos. Mag. 44, 829 (1953).
55.Van den Beukel, A., Phys. Status Solidi (a) 30, 197 (1975).
56.Robinson, J.M. and Shaw, M.P., Int. Mater. Rev. 39, 113 (1994).
57.Robinson, J.M., Int. Mater. Rev. 39, 217 (1994).
58.Kubin, L.P., Chihab, K. and Estrin, Y., Acta Metall. 36, 2707 (1988).
59.McCormick, P.G., Venkadesan, S. and Ling, C.P., Scr. Metall. 29, 1159 (1993).
60.McCormick, P.G. and Ling, C.P., Acta Metall. Mater. 43, 1969 (1995).
61.LukáČ, P., Balík, J. and Chmelík, F., Mater. Sci. Eng. A 234–236, 45 (1997).
62.Zbib, H.M. and Aifantis, E.C., Scripta Metall. 22, 1331 (1988).
63.Hähner, P., Mater. Sci. Eng. A 164, 23 (1993).
64.McCormick, P.G., Acta Metall. 30, 2079 (1982).
65.Schuh, C.A. and Nieh, T.G., Acta Mater. 51, 87 (2003).
66.Bobji, M.S. and Biswas, S.K. in Recent Advances in Metallurgical Processes, edited by Sastry, D.H., Dwarakadasa, E.S., Iyengar, G.N.K., and Subramanian, S., (New Age Int. Publishers, New Delhi, 1977), p. 1223.
67.Poisl, W.H., Oliver, W.C. and Fabes, B.D., J. Mater. Res. 10, 2024 (1995).
68.Král, R. and LukáČ, P., Mater. Sci. Eng. A 234–236, 786 (1997).
69.Cahn, R.W., Physical Metallurgy (American Elsevier Publishing Co. Inc., New York, 1970).
70.Pink, E., Acta Metall. 37, 1773 (1989).
71.Kalk, A., Nortmann, A., and Ch. Schwink, Philos. Mag. A 72, 1239 (1995).
72.Iwahashi, Y., Wang, J., Horita, Z., Nemoto, M. and Langdon, T.G., Scr. Mater. 35, 143 (1996).
73.Furukawa, M., Iwahashi, Y., Horita, Z., Nemoto, M. and Langdon, T.G., Mater. Sci. Eng. A 257, 328 (1998).
74.Furukawa, M., Horita, Z., Nemoto, M. and Langdon, T.G., J. Mater. Sci. 36, 2835 (2001).
75.Dao, M., Chollacoop, N., Van Vliet, K.J., Venkatesh, T.A. and Suresh, S., Acta Mater 49, 3899 (2001).
76.Vaidyanathan, R., Dao, M., Ravichandran, G. and Suresh, S., Acta Mater 49, 3781 (2001).
77.Tabor, D., Microindentation Techniques in Materials Science and Engineering, ASTM STP 889, edited by Blau, P.J. and Lawn, B.R. (American Society for Testing and Materials, Philadelphia, PA, 1986), p. 129.
78.Wright, W.J., Saha, R. and Nix, W.D., Mater. Trans. JIM 42, 642 (2001).
79.Kim, J.J., Choi, Y., Suresh, S. and Argon, A.S., Science 295, 654 (2002).
80.Golovin, Y.I., Ivolgin, V.I., Khonik, V.A., Kitagawa, K., andA.I. Tyurin, Scr. Mater. 45, 947 (2001).
81.Schuh, C.A., Nieh, T.G. and Kawamura, Y., J. Mater. Res. 17, 1651 (2002).
82.Nieh, T.G., Schuh, C.A., Wadsworth, J. and Li, Y., Intermetallics 10, 1177 (2002).
83.Benameur, T., Hajlaoui, K., Yavari, A.R., Inoue, A. and Rezgui, B., Mater. Trans. JIM 43, 2617 (2002).
84.Jiang, W.H. and Atzmon, M., J. Mater. Res. 18, 75 (2003).
85.Gouldstone, A., Koh, H.J., Zeng, K.Y., Giannakopoulos, A.E. and Suresh, S., Acta Mater. 48, 2277 (2000).

Keywords

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed