Hostname: page-component-848d4c4894-v5vhk Total loading time: 0 Render date: 2024-06-20T05:16:48.517Z Has data issue: false hasContentIssue false

The structure of a shear layer bounding a separation region. Part 2. Effects of free-stream turbulence

Published online by Cambridge University Press:  21 April 2006

I. P. Castro
Affiliation:
Department of Mechanical Engineering, University of Surrey, Guildford, Surrey, GU2 5XH, UK
A. Haque
Affiliation:
Department of Chemical Engineering, Imperial College, London, SW7 2AZ, UK

Abstract

Detailed measurements throughout the separated region behind a flat plate placed normal to a turbulent stream are reported. A long, central, downstream splitter plate prevented vortex shedding and led to a relatively extensive reversed flow region. Mean flow and turbulence data are compared with results obtained in the (nominal) absence of free-stream turbulence, and attention is concentrated on the changes in the shear-layer structure resulting from the different nature of the upstream flow.

Many aspects of the results confirm those obtained recently by other workers. Free-stream turbulence enhances shear-layer entrainment rates, reduces the distance to reattachment and modifies the relatively low-frequency ‘flapping’ motion of the shear layer. In addition, however, extensive use of pulsed wire anemometry has allowed detailed measurements of the turbulence structure throughout the flow and it is shown that this is also modified significantly by the stream turbulence.

Type
Research Article
Copyright
© 1988 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Bearman P. W. 1978 Turbulence effects on bluff body mean flow. Proc. 3rd US Natl Conf. on Wind Engng, Florida, p. LV–1.Google Scholar
Bearman, P. W. & Morel T. 1983 Effect of free stream turbulence on the flow around bluff bodies. Prog. Aerospace Sci. 20, 97123.Google Scholar
Brown, G. L. & Roshko A. 1974 On density effects and large structure in turbulent mixing layers. J. Fluid Mech. 64, 775816.Google Scholar
Castro I. P. 1985 Time domain measurements in separated flows. J. Fluid Mech. 150, 183.Google Scholar
Castro, I. P. & Dianat M. 1983 Surface flow patterns on rectangular bodies in thick boundary layers. J. Wind Engng Indust. Aero. 11, 107.Google Scholar
Castro, I. P. & Fackrell J. E. 1978 A note on two-dimensional fence flows with emphasis on wall constraint. J. Ind. Aero. 3, 1.Google Scholar
Castro, I. P. & Haque A. 1987 The structure of a turbulent shear layer bounding a separation region. J. Fluid Mech. 179, 439.Google Scholar
Cherry N. J., Hiller, R. & Latour M. E. M. P. 1984 Unsteady measurements in a separated and reattaching flow. J. Fluid Mech. 144, 13.Google Scholar
Compte-Bellot, G. & Corrsin S. 1966 The use of a contraction to improve the isotropy of grid-generated turbulence. J. Fluid Mech. 25, 657.Google Scholar
Hancock, P. E. & Bradshaw P. 1983 The effect of free-stream turbulence on turbulent boundary layers. Trans. ASME I: J. Fluids Engng 105, 284.Google Scholar
Hillier, R. & Cherry N. J. 1981 The effects of stream turbulence on separation bubbles. J. Wind Engng Indust. Aero. 8, 49.Google Scholar
Hillier, R. & Dulai B. S. 1985 Pressure fluctuations in a turbulent separated flow. Proc. 5th Intl Symp. on Turbulent Shear Flows, Cornell.Google Scholar
Kiya, M. & Sasaki K. 1983 Structure of a turbulent separation bubble. J. Fluid Mech. 137, 83.Google Scholar
Nakamura, Y. N. & Ozono S. 1987 The effects of turbulence on a separated and reattaching flow. J. Fluid Mech. 178, 477.Google Scholar
Patel R. P. 1978 Effects of stream turbulence on free shear flows. Aero. Q. 29, 33.Google Scholar
Pui, N. K. & Gartshore I. S. 1979 Measurements of the growth rate and structure in plane turbulent mixing layers. J. Fluid Mech. 91, 111.Google Scholar
Roshko, A. & Lau J. C. 1965 Some observations on transition and reattachment of a free shear layer in incompressible flow. Proc. 1965 Heat Transfer and Fluid Mech. Inst.Google Scholar
Wood, D. & Bradshaw P. 1982 A turbulent mixing layer constrained by a solid surface. Part 1. Measurements before reaching the surface. J. Fluid Mech. 122, 57.Google Scholar
Wood, D. H. & Ferziger J. H. 1984 The potential flow bounded by a mixing layer and a solid surface Proc. R. Soc. Lond. A 395, 265.Google Scholar
Wygnanski, I. & Fiedler H. E. 1970 The two-dimensional mixing region. J. Fluid Mech. 41, 327.Google Scholar