Hostname: page-component-848d4c4894-x24gv Total loading time: 0 Render date: 2024-06-07T07:27:08.720Z Has data issue: false hasContentIssue false

The dynamic balances of dissolved air and heat in natural cavity flows

Published online by Cambridge University Press:  29 March 2006

C. Brennen
Affiliation:
Ship Division, National Physical Laboratory Present address: California Institute of Technology, Pasadena, California.

Abstract

In steady, fully developed and unventilated cavity flows occurring in practice, air (originally dissolved in the water) and heat are diffused through the fluid towards the interface providing a continuous supply of air and vapour to the cavity. This must be balanced by the rate of entrainment of volume of air and vapour away from the cavity in the wake. These equilibria which determine respectively the partial pressure of air within the cavity and the temperature differences involved in the flow are studied in this paper. The particular case of the cavitating flow past a spherical headform has been investigated in detail. Measurements indicate a near-linear relation between the partial pressure of air in the cavity and the total air content of the water. From a second set of experiments, designed to estimate the volume rates of entrainment under various conditions by employing artificial ventilation, it appears that this is a function only of tunnel speed and cavity size within the range of the experiments. A simplified theoretical approach involving the turbulent boundary layer on the surface of the cavity is then used to estimate the rates of diffusion into the cavity. The resulting air balance yields a partial pressure of air/air content relation compatible with experiment. The water vapour or heat balance suggests that the temperature differences involved are likely to be virtually undetectable experimentally.

Type
Research Article
Copyright
© 1969 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Brennen, C. 1968 A numerical solution of axisymmetric cavity flows. Parts I and II. N.P.L. Ship Division Report, no. 114.Google Scholar
Cox, R. N. & CLAYDEN, W. A. 1956 Air entrainment at the rear of a steady cavity. Symp. on Cavitation in Hydrodynamics. N.P.L. Sept. 1956. London: H.M.S.O.
Eisenberg, P. & POND, H. L. 1948 Water tunnel investigations of steady state cavities. David Taylor Model Basin Report, no. 668.Google Scholar
Gadd, G. E. & GRANT, S. 1965 Some experiments on cavities behind disks. J. Fluid Mech. 23, 4.Google Scholar
Parkin, B. R. & KERMEEN, R. W. 1963 The roles of convective air diffusion and liquid tensile stresses during cavitation inception. Proc. Iahr Symp. on Cavitation and Hydraulic Machinery, Sendai, Japan, 1963.Google Scholar
Rott, N. & CRABTREE, L. F. 1952 Simplified laminar boundary layer calculations for bodies of revolution and for yawed wings. J. Aero. Sci. 19, 55365.Google Scholar
Silverleaf, A. 1960 Basic design of the N.P.L. no. 2 water tunnel. N.P.L. Ship Division Report, no. 15.Google Scholar
Song, C. S. 1961 Pulsation of ventilated cavities. Univ. of Minnesota, St Anthony Falls Hydraulic Lab. Tech. Paper, no. 32, series B.Google Scholar
Townsend, A. A. 1956 The Structure of Turbulent Shear Flow. Cambridge University Press.
Woods, L. C. 1966 On the instability of ventilated cavities. J. Fluid Mech. 26, 43757.Google Scholar