Hostname: page-component-7479d7b7d-t6hkb Total loading time: 0 Render date: 2024-07-12T07:32:07.157Z Has data issue: false hasContentIssue false

Pressure pulses generated by the interaction of a discrete vortex with an edge

Published online by Cambridge University Press:  20 April 2006

Argyris G. Panaras
Affiliation:
HAF Technology Research Center (KETA), Palaion Faliron, Athens. Greece

Abstract

A central role in the mechanism of the self-sustained oscillations of the flow about cavity-type bodies is played by the reattachment edge. Experimentally it has been found that periodic pressure pulses generated on this edge are fed back to the origin of the shear layer and cause the production of discrete vortices. The oscillations have been found to be suppressed or attenuated when the edge has the shape of a ramp of small angle, or when it is properly rounded. To clarify the role of the shape of the reattachment edge in the mechanism of the oscillations, a mathematical model is developed for the vortex–edge interaction. In this model the interaction of one discrete vortex, imbedded within a constant-speed parallel flow, with the reattachment edge is studied. Two typical shapes of the reattachment edge are examined; a ramp of variable angle and an ellipse. The main conclusion of the present analysis is the strong dependence of the pressure pulses, that are induced on the surface of the edge, on the specific shape of the edge. The pressure pulses on reattachment edges with shapes that give rise to steady flows have been found to be of insignificant amplitude. On the other hand, when the reattachment edge has a shape that is known to result in oscillating flow, the induced pressure pulses are of very large amplitude. Intermediate values of the pressure are found for configurations known to stabilize partially the flow. The present results indicate that, for the establishment of the oscillation, the feedback force generated by the vortex–edge interaction must have an appropriate value. The feedback force may be eliminated if the shape of the lip of the edge is properly designed.

Type
Research Article
Copyright
© 1985 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Abramowitz, M. & Stegun, I. A. 1970 Handbook of Mathematical Functions. New York: Dover.
Browand, F. K. & Latigo, B. O. 1979 Growth of the two-dimensional mixing layer from a turbulent and non-turbulent boundary layer. Phys. Fluids 22, 10111019.Google Scholar
Brown, G. B. 1937 The vortex motion causing edge tones. Proc. Phys. Soc. 49, 493507.Google Scholar
Brown, G. L. & Roshko, A. 1974 On density effects and large structures in turbulent mixing layers. J. Fluid Mech. 64, 775816.Google Scholar
Chandrsuda, C., Mehta, R. D., Weir, A. D. & Bradshaw, P. 1978 Effect of free-stream turbulence on large structure in turbulent mixing layers. J. Fluid Mech. 85, 693704.Google Scholar
Clements, R. R. 1973 An inviscid model of two-dimensional vortex shedding. J. Fluid Mech. 57, 321336.Google Scholar
Conlisk, A. T. & Rockwell, D. 1981 Modeling of vortex-corner interaction using point vortices. Phys. Fluids 24, 21332142.Google Scholar
Conte, S. D. & De Bour, C. 1972 Elementary Numerical Analysis. An Algorithmic Approach. McGraw-Hill.
Crighton, D. G. 1975 Basic principles of aerodynamic noise generation. Prog. Aero. Sci. 16, 3196.Google Scholar
Ethembabaoglu, S. 1973 On the fluctuating flow characteristics in the vicinity of gate slots. Division of Hydraulic Engineering, University of Trondheim, Norway.
Franke, M. E. & Carr, D. L. 1975 Effect of geometry on open cavity flow-induced pressure oscillations. AIAA paper 75-492, AIAA 2nd Aero-Acoustics Conf., Hampton, Va., March 24–26.
Freymuth, P. 1966 On transition in a separated laminar boundary layer. J. Fluid Mech. 25, 683704.Google Scholar
Gharib, M. 1983 The effect of flow oscillations on cavity drag, and a technique for their control. Ph.D. thesis, California Institute of Technology.
Heller, H. H. & Bliss, D. 1975 The physical mechanism of flow-induced pressure fluctuations in cavities and concepts for their suppression. AIAA Paper 75-491, AIAA 2nd Aero-Acoustics Conf., Hampton, Va., March 24–26.
Ho, C. M. & Nosseir, N. S. 1981 Dynamics of an impinging jet. Part 1. The feedback phenomenon. J. Fluid Mech. 105, 119142.Google Scholar
Kibens, V. 1980 Discrete noise spectrum generated by an acoustically excited jet. AIAA J. 18, 434441.Google Scholar
Mabey, D. G. 1971 Flow unsteadines and model vibrations in wind tunnels at subsonic and transonic speeds. ARC CP 1155.
Miksad, R. W. 1972 Experiments on the nonlinear stages of free-shear transition. J. Fluid Mech. 56, 695719.Google Scholar
Panaras, A. G. 1977 Design criteria for the non-occurrence of high speed unsteady separation about concave bodies. AGARD Conf. Proc. 227, paper 30.
Panaras, A. G. 1981 Pulsating flows about axisymmetric concave bodies. AIAA J. 19, 804806.Google Scholar
Rockwell, D. & Knisely, G. 1979 The organized nature of flow impingement upon a corner. J. Fluid Mech. 93, 413432.Google Scholar
Rockwell, D. & Naudascher, F. 1979 Self-sustained oscillations of impinging free shear layers. Ann. Rev. Fluid Mech. 11, 6794.Google Scholar
Roshko, A. 1976 Structure of turbulent shear flows: a new look. AIAA J. 14, 13491357.Google Scholar
Rossiter, J. E. 1964 Wind tunnel experiments on the flow over rectangular cavities at subsonic and transonic speeds. RAE Rep. and Memoranda No. 3438.
Saffman, R. G. & Baker, G. R. 1979 Vortex interactions. Ann. Rev. Fluid Mech 11, 95122.Google Scholar
Spiegel, M. R. 1964 Complex Variables. Schaum's Outline Series. McGraw-Hill.
Wood, C. 1962 Hypersonic flow over spiked cones. J. Fluid Mech. 12, 614624.Google Scholar
Ziada, S. & Rockwell, D. 1982 Oscillations of an unstable mixing layer impinging upon an edge. J. Fluid Mech. 124, 307334.Google Scholar