Hostname: page-component-848d4c4894-4rdrl Total loading time: 0 Render date: 2024-07-06T10:05:49.140Z Has data issue: false hasContentIssue false
  • English
  • Français

Determination of an adjusting rule in the case of multi-criteria inertial piloting

Published online by Cambridge University Press:  29 June 2011

M. Pillet  and
E. Pairel
Get access

Abstract

The weighted inertial piloting of processes presented in this paper is a break-away in terms of the quality of machined mechanical workpieces compared to the traditional piloting carried out by machine setters. However, sometimes one has a stability problem during the piloting phase due to over adjustment. We propose to study the causes of this instability and to develop an approach in order to correct the problems. Once we have reminded ourselves of the basics of weighted inertial tolerancing, we will propose an approach to identify the most probable decentring. The applications of the concepts discussed in this article were tested over a period of two months. The results are very convincing, especially with the elimination of the phenomenon previously observed in identical conditions.

Keywords

Inertial tolerancinginertial pilotingprocess adjustingstatistical process controladjusting rules
Type
Research Article
Information
International Journal of Metrology and Quality Engineering , Volume 2 , Issue 1 , 2011 , pp. 51 - 59
Copyright
© EDP Sciences 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

M. Pillet, F. Bernard, L. Avrillon, Le tolérancement inertiel, une autre façon d’intégrer l’aspect combinatoire dans les processus assemblés, Congrès CPI 2001, CD-ROM (Fès, Morocco, 2001)
M. Pillet, A. Sergent, D. Duret, Weighted inertial tolerancing, 5 e Congrès Int. Pluridisciplinaire Qualité et Sûreté de Fonctionnement (Qualita 2003, Nancy, France, 2003), pp. 111–118
M. Pillet, Inertial Tolerancing, The Total Quality Management Magazine (2004), Vol. 16, pp. 202–209
M. Pillet, S. Samper, F. Formosa, Geometrical Inertial Tolerancing, 6 e Congrès Int. Pluridisciplinaire Qualité et Sûreté de Fonctionnement (Qualita 2005) (Bordeaux, France, 2005), pp. 757–764
Pillet, M., Denimal, D., Adragna, P.A., Samper, S., Interest of the inertial tolerancing method in the case of watchmaking micro assembly, Micro-Assembly Technologies and Applications, IFIP (2008), Vol. 260, 189–197 Google Scholar
D. Denimal, M. Pillet, A. Sergent, Détermination des paramètres d’une carte de contrôle dans un contexte de tolérancement inertiel, Qualita 2009 (Besançon, 2009)
M. Pillet, P.A. Adragna, V. Ozouf, A.S. Guerra, Pilotage par carte de contrôle dans le cas d’un tolérancement inertiel, Qualita 2007 (Tanger, Maroc, 2007)
Goldschmidt, E., Pairel, E., Giordano, M., Pillet, M., Changeover from the functional geometric tolerances to the dimensional parameters to be supervised in production, CIRP J. Manuf. Syst. 36, 305–309 (2007) Google Scholar
E. Goldschmidt, E. Pairel, Détermination systématique des étapes de contrôle et des cotes de fabrication pour les procédés d’usinage, 18 e Congrès Français de Mécanique (France, 2007)
E. Pairel, E. Goldschmidt, P.A. Adragna, P. Hernandez, M. Pi, The pilot dimensions method: Reconciling Steering and Conformity in Workshops, Int. J. Product. Res. 1–14 (2010)
D. Denimal, M. Pillet, A. Sergent, Inertial Control Chart, Industrial Application and feedback, IDMME-Virtual Concept (Beijing, China, 2008)
M. Pillet, Améliorer la productivité, déploiement industriel du tolérancement inertiel, edition d’organisation (2010), ISBN 978-2-212-54754-222
H. Lill, Y. Chu, K. Chung, Statistical Set-up Adjustement for low volume manufacturing, Statistical Process Control in Manufacturing (Dekker, 1991), pp. 23–38
M. Matsumoto, T. Nishimura, Mersenne twister: a 623-dimensionally equidistributed uniform pseudo-random number generato, ACM Transactions on Modeling and Computer Simulation (TOMACS), Special issue on uniform random number generation (TOMACS Homepage archive, 1998), Vol. 8