Hostname: page-component-78c5997874-t5tsf Total loading time: 0 Render date: 2024-11-05T20:24:14.391Z Has data issue: false hasContentIssue false

High temporal contrast 1053 nm laser source based on optical parametric amplification and second-harmonic generation

Published online by Cambridge University Press:  25 January 2023

Liya Shen
Affiliation:
State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China School of Physical Science and Technology, ShanghaiTech University, Shanghai, China Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, China
Yanyan Li*
Affiliation:
State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China
Wenkai Li
Affiliation:
State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China
Jiajun Song
Affiliation:
State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China
Junyu Qian
Affiliation:
State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, China
Jianyu Sun
Affiliation:
State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, China
Renyu Feng
Affiliation:
State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, China
Yujie Peng*
Affiliation:
State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China
Yuxin Leng*
Affiliation:
State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai, China School of Physical Science and Technology, ShanghaiTech University, Shanghai, China Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, China
*
Correspondence to: Yanyan Li, Yujie Peng, and Yuxin Leng, State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. Email: yyli@siom.ac.cn (Y. Li); yjpeng@siom.ac.cn (Y. Peng); lengyuxin@siom.ac.cn (Y. Leng)
Correspondence to: Yanyan Li, Yujie Peng, and Yuxin Leng, State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. Email: yyli@siom.ac.cn (Y. Li); yjpeng@siom.ac.cn (Y. Peng); lengyuxin@siom.ac.cn (Y. Leng)
Correspondence to: Yanyan Li, Yujie Peng, and Yuxin Leng, State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. Email: yyli@siom.ac.cn (Y. Li); yjpeng@siom.ac.cn (Y. Peng); lengyuxin@siom.ac.cn (Y. Leng)

Abstract

Temporal contrast directly affects the interaction between ultraintense and ultrashort pulse lasers with matter. Seed laser sources with broad bandwidth and high temporal contrast are significant for overall temporal contrast enhancement. The technique of cascaded nonlinear processes with optical parametric amplification and second-harmonic generation is demonstrated for high temporal contrast seed source generation. Within 40 ps before the main pulse, the temporal contrast reaches over 1011. The pulse energy and duration of the high-contrast pulse are 112 μJ and 70 fs, respectively. Considering its high beam quality and stability, this laser source can serve as a high-quality seed for Nd:glass-based ultraintense and ultrashort pulse laser facilities.

Type
Research Article
Creative Commons
Creative Common License - CCCreative Common License - BY
This is an Open Access article, distributed under the terms of the Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0), which permits unrestricted re-use, distribution and reproduction, provided the original article is properly cited.
Copyright
© The Author(s), 2023. Published by Cambridge University Press in association with Chinese Laser Press

1 Introduction

Ultraintense and ultrashort lasers can be used in high-field physics[ Reference Nazarov, Mitrofanov, Sidorov-Biryukov, Chaschin, Shcheglov, Zheltikov and Panchenko 1 ], laser-driven particle acceleration[ Reference Gruse, Streeter, Thornton, Armstrong, Baird, Bourgeois, Cipiccia, Finlay, Gregory, Katzir, Lopes, Mangles, Najmudin, Neely, Pickard, Potter, Rajeev, Rusby, Underwood, Warnett, Williams, Wood, Murphy, Brenner and Symes 2 ] and so on[ Reference Di Piazza, Muller, Hatsagortsyan and Keitel 3 Reference Mourou and Tajima 6 ]. Nowadays, the peak power of the ultrafast laser has reached the level of 10 PW (1 PW = 1015 W)[ Reference Li, Gan, Yu, Wang, Liu, Guo, Xu, Xu, Hang, Xu, Wang, Huang, Cao, Yao, Zhang, Chen, Tang, Li, Liu, Li, He, Yin, Liang, Leng, Li and Xu 7 ], and many ultraintense laser facilities have sprung up[ Reference Danson, Haefner, Bromage, Butcher, Chanteloup, Chowdhury, Galvanauskas, Gizzi, Hein, Hillier, Hopps, Kato, Khazanov, Kodama, Korn, Li, Li, Limpert, Ma, Nam, Neely, Papadopoulos, Penman, Qian, Rocca, Shaykin, Siders, Spindloe, Szatmari, Trines, Zhu, Zhu and Zuegel 8 Reference Zuegel, Bahk, Begishev, Bromage, Dorrer, Okishev and Oliver 10 ]. Among the gain media used in amplifiers, Nd:glass[ Reference Lu, Peng, Li, Wang, Guo, Xu and Leng 11 ] has high saturation fluorescence and a long upper-state lifetime, and facilitates the fabrication of large apertures. Thanks to these merits, laser systems based on Nd:glass can deliver extremely high-energy pulses for applications such as inertial confinement fusion or proton acceleration. For most of the aforementioned applications, temporal contrast is one of the key parameters. Nowadays, the focused intensity of the laser has reached 1023 W/cm2[ Reference Yoon, Kim, Choi, Sung, Lee, Lee and Nam 12 ]. The ionization threshold of the solid targets ranges from 1010 to 1012 W/cm2. However, conventional commercial lasers have a temporal contrast of 106–107 or worse, so the pre and pedestal pulses may cause target pre-ionization and affect the interaction between the main pulse and the targets.

To suppress the pre and pedestal pulses, many methods have been proposed, such as plasma mirrors[ Reference Inoue, Maeda, Tokita, Mori, Teramoto, Hashida and Sakabe 13 , Reference Arikawa, Kojima, Morace, Sakata, Gawa, Taguchi, Abe, Zhang, Vaisseau, Lee, Matsuo, Tosaki, Hata, Kawabata, Kawakami, Ishida, Tsuji, Matsuo, Morio, Kawasaki, Tokita, Nakata, Jitsuno, Miyanaga, Kawanaka, Nagatomo, Yogo, Nakai, Nishimura, Shiraga, Fujioka, Group, Group, Azechi, Sunahara, Johzaki, Ozaki, Sakagami, Sagisaka, Ogura, Pirozhkov, Nishikino, Kondo, Inoue, Teramoto, Hashida and Sakabe 14 ] after compression, second-harmonic generation (SHG)[ Reference Hillier, Danson, Duffield, Egan, Elsmere, Girling, Harvey, Hopps, Norman, Parker, Treadwell, Winter and Bett 15 ], cross-polarized wave (XPW)[ Reference Ramirez, Papadopoulos, Pellegrina, Georges, Druon, Monot, Ricci, Jullien, Chen, Rousseau and Lopez-Martens 16 Reference Jullien, Albert, Cheriaux, Etchepare, Kourtev, Minkovski and Saltiel 18 ], nonlinear elliptic polarization rotation (NER)[ Reference Khodakovskiy, Kalashnikov, Pajer, Blumenstein, Simon, Toktamis, Lozano, Mercier, Cheng, Nagy and Lopez-Martens 19 , Reference Smijesh, Zhang, Fischer, Muschet, Salh, Tajalli, Morgner and Veisz 20 ], and optical parametric amplification (OPA)[ Reference Wang and Lutherdavies 21 ]. However, energy loss induced by plasma mirrors cannot be compensated by further amplification. Although XPW and NER are simple and can broaden the spectrum, wavelength shift or tuning is difficult, and it may cause optical element damage with higher energy. OPA has the characteristic of wavelength tuning and can significantly enhance temporal contrast related to its high gain factor[ Reference Wang and Lutherdavies 21 ].

Both OPA and SHG can enhance the temporal contrast and tune the wavelength. In this paper, we demonstrate the combination of cascaded OPA and SHG processes to obtain seed pulses with broad bandwidth and high temporal contrast. In our experiment, an Yb-doped femtosecond laser is used as the driven source. The output 1053 nm pulse energy and duration are 112 μJ and 70 fs, respectively. The measured temporal contrast exceeds 1011, which is limited by the dynamic range of the measurement equipment. As a seed source, the beam stability and quality are adequate. Compared to other works driven by 800 nm laser[ Reference Li, Huang, Wang, Xu, Lu, Wang, Leng, Li and Xu 22 , Reference Shen, Wang, Zhang, Fan, Teng and Wei 23 ], parasitic third-order nonlinear effects can be reduced because of the scaling of the critical power for self-focusing with λ2[ Reference Manzoni and Cerullo 24 ]. Despite the narrow bandwidth of the Yb laser, spectral broadening and wavelength tuning can be achieved by OPA.

2 Experimental setup

The scheme of the high temporal contrast 1053 nm laser source is demonstrated in Figure 1(a). A commercial laser source (Pharos, Light Conversion) is used as the driving laser, delivering a pulse energy of 2 mJ at a repetition rate of 1 kHz. The central wavelength and the pulse duration are 1036.8 nm and 180 fs, respectively. The apparatus mainly consists of the white-light generation (WLG) process, OPA process, and SHG process.

Figure 1 (a) Scheme of the 1053 nm laser source. PBS: polarization beam splitter; L: lens; NDF: neutral density filter; NOPA: noncollinear OPA. The linewidth indicates the beam size roughly and the shade indicates the pulse energy. (b) Schematic of the NOPA, where the angle between the signal and the pump is less than 0.7°.

The driving laser pulse is divided into three parts with two polarization beam splitters (PBSs) and half-wave plates (HWPs), and the energy can be adjusted precisely. The fraction of the reflected part of PBS2 is used for WLG. Through an aperture and a neutral density filter, the pulse energy and diameter are controlled to a proper level to generate a stable single filament. For long wavelength pulses (such as 1036 nm), low-bandgap materials such as yttrium aluminum garnet (YAG) outperform sapphire for WLG[ Reference Bradler, Baum and Riedle 25 , Reference Riedel, Stephanides, Prandolini, Gronloh, Jungbluth, Mans and Tavella 26 ]. With one 4-mm-thick YAG crystal, the generated white light has a broad spectral coverage from about 350 to 2200 nm (inset red area in Figure 2(a)), and the signal pulse of NOPA1 (noncollinear OPA) is part of it (Figure 2(a) inset blue line). The transmitted part (~90 μJ) of PBS2 is used as the pump pulse for NOPA1. Here, we utilize a noncollinear structure because a collinear structure, which is constrained by optical coatings, may make it impossible to distinguish between the signal and the idler pulses. The noncollinear angle is less than 0.7°. With lenses L4 (f = 150 mm) and L5 (f = 250 mm), the signal and pump pulses are focused on the nonlinear crystal 1 (beta barium borate (β-BBO), type II phase-matching, 8 mm × 8 mm × 4 mm, θ = 29.7°, ϕ = 30°). To avoid damage to the crystal and ensure pump intensity, the focal spot of the pump pulse is close to the crystal. By precise control of the spatial overlap and the time delay between the signal pulse and the pump pulse, the most efficient amplification can be achieved, and the energy of the amplified signal pulse is about 1 μJ. The pump intensity I p = 149 GW/cm2 and the corresponding small signal gain is 2.98 × 106. Then the amplified pulse is collimated by L6 (f = 200 mm) and amplified in NOPA2. The reflection part (about 1.87 mJ) of PBS1 is used as the pump pulse for NOPA2, which is collimated by L1 (f = 200 mm) and L2 (f = –100 mm) to match the size of the signal pulse. Both beam sizes are 3.2 mm in diameter. At this stage, the pump intensity I p = 116 GW/cm2 and the small signal gain is 7.8 × 107. Similar to NOPA1, the noncollinear angle of NOPA2 is also less than 0.7° to reduce the negative influence of the angular chirp of the idler pulse. Figure 1(b) displays the details of the NOPA. With accurate spatial and temporal overlap, an amplified signal pulse and a generated idler pulse can be achieved. By slightly adjusting nonlinear crystal 2 (β-BBO, type I phase-matching, 8 mm × 8 mm × 3 mm, θ = 21.3°, ϕ = 0°), the central wavelength of the output pulses can be tuned. In this experiment, the center wavelength is set at 2106 nm. With one type I phase-matching BBO crystal (θ = 21°, ϕ = 0°, 10 mm × 10 mm × 0.8 mm), we achieved SHG at 1053 nm, and the 1053 nm pulses are separated from the 2106 nm pulses with two dichroic mirrors.

Figure 2 (a) Spectra of NOPA2 output. The orange area is the amplified signal pulse and the green area is the idler pulse of NOPA2. The orange dashed line (simulated signal) and green dotted line (simulated idler) are the simulated spectra. The red area of the inset is the spectrum of the white light generated by YAG, and the jitter before 500 nm (gray area) may be caused by stray light of the spectrometer. The blue line of the inset is the amplified signal pulse of NOPA1. (b) Spectra of second-harmonic generation of the idler from NOPA2. The spectra fluctuate in the red area, and the middle solid line is the average value.

3 Results and discussion

Based on the NOPA and SHG processes, the center wavelength is successfully transferred from 1036 to 1053 nm. With nearly degenerate OPA, the achieved amplified pulse has an energy of 246 μJ and a central wavelength of 2106 nm (Figure 2(a), green area). A theoretical model[ Reference Li, Chen, Li, Xu, Guo, Lu, Wu, Wang, Li and Leng 27 ] based on the coupled second-order three-wave nonlinear propagation equations in the plane-wave limit is used to simulate the OPA progress (Figure 2(a), orange dashed and green dotted lines). The center wavelength is tuned to 2106 nm to gain the optimum double-frequency efficiency. After the SHG process, the energy of the output 1053 nm pulse is 112 μJ and the spectrum is as shown by the red solid line in Figure 2(b). According to the SHG efficiency $\eta ={\left(\frac{5.46\;{d}_{\mathrm{eff}}}{\lambda_0{n}_0^{\frac{3}{2}}}\right)}^2\times {L}^2\times {I}_{\lambda_0}\times \mathrm{sinc}^2\left(\frac{\Delta kL}{2}\right)$ and the phase-matching bandwidth ${\lambda}_{\mathrm{FWHM}}=\frac{0.44\;{\lambda}_0/L\;}{\left|{n}^{\prime}\left({\lambda}_0\right)-\frac{1}{2}{n}^{\prime}\left({\lambda}_0/2\right)\right|}$ , the trade-off between efficiency and spectral width should be considered. Therefore, 0.8 mm BBO is chosen to gain a broad enough bandwidth at optimized efficiency. The spectral stability is measured over 60 min, containing 3600 spectra (Ocean Optics). Each spectrum is the integrated spectra of 100 pulses because the integral time is 100 ms. As shown in Figure 2(b), the spectral jitter range (red area) is very small, which guarantees stable operation of the laser in the future. Because the pump and signal pulses originate from the same driving laser, the idler is passively carrier envelop phase (CEP) stable[ Reference Baltuška, Fuji and Kobayashi 28 ]. The CEP of the second harmonic is related to the fundamental pulses. As a result, the generated 1053 nm pulse is also passively CEP stabilized.

The pulse duration of the output 1053 nm pulse is measured by the frequency-resolved optical gating method (FROG, GRENOUILE, Swamp Optics). Compensated by chirped mirrors (UltraFast Innovations, –2400 fs2, 950–1120 nm), the pulse duration is compressed to 70 fs (Figure 3). The reconstruction error of FROG is about 0.8%. The calculated Fourier transform limited (FTL) duration is 68 fs, implying that the focusing in the NOPA does not introduce disastrous high-order dispersion.

Figure 3 Pulse width of the output 1053 nm. (a) Measured FROG trace. (b) Retrieved FROG trace. (c) Retrieved spectral intensity (blue solid line), spectral phase (orange), and actual spectrum of 1053 nm (blue dashed line). (d) Retrieved temporal intensity (blue solid line), retrieved temporal phase (orange) and Fourier transform-limited pulse (blue dashed line). The grid sizes are 256 × 256.

The temporal contrast of the seed laser is key in high-field laser physics, and we measured it by a third-order autocorrelator (Sequoia 1000, Amplitude Technologies), as shown in Figure 4. The pedestal is eliminated and the prepulses or postpulses are weakened individually. The dynamic range of the measurement device limits the observed contrast, as shown in the Figure 4(a) inset, which denotes the noise level. Within 40 ps before the main pulse, the temporal contrast has reached 1011. Subsequent amplification in the main amplifier can be used to verify the high temporal contrast.

Figure 4 (a) Temporal contrast of the initial 1030 nm (red line) and output 1053 nm (black line) pulses. The blue box indicates the noise level. (b) Details of the temporal contrast of the initial 1030 nm (red line) and output 1053 nm laser pulses (black line) at ±40 ps time.

The stability of beam pointing and power are measured. For angular beam pointing, the output 1053 nm pulse is focused by a lens (f = 1000 mm). The beam position at the focal spot is recorded every second within 60 min (DataRay). The root-mean-square (RMS) error in the X-direction is 12.78 μrad, and the RMS error in the Y-direction is 8.54 μrad (Figure 5(a)). The power (Gentec-EO) is 112 mW for 60 min (Figure 5(b)) with an error of 0.218% (RMS), whereas the power fluctuation of the initial 1030 nm is 0.19% (RMS). Despite the NOPA scheme, the beam quality is quite good. The M 2 values (BeamSquared, Ophir) in the horizontal and vertical directions are 1.53 and 1.49, respectively (Figure 5(c)).

Figure 5 The quality of the output 1053 nm beam. (a) The beam pointing stability. (b) The M 2 quality of the output laser beam. (c) The power stability.

4 Conclusion

In summary, a high temporal contrast seed source running at 1053 nm central wavelength and a 1 kHz repetition rate has been demonstrated. Combined with OPA and SHG processes, the temporal contrast reached 1011 within 40 ps before the main pulse. The output power is 112 mW with stability of 0.218% RMS. Compared with the initial 1036 nm, the spectrum has been broadened by OPA, and the pulse can be compressed to 70 fs. This 1053 nm laser has excellent beam quality and stability and is a suitable seed for Nd-based ultraintense laser facilities.

Acknowledgements

This work was supported by the National Key R&D Program of China (2017YFE0123700); the Strategic Priority Research Program of the Chinese Academy of Sciences (XDB1603); the National Natural Science Foundation of China (61925507, 62075227, 12004402); the Program of Shanghai Academic/Technology Research Leader (18XD1404200); the Shanghai Municipal Science and Technology Major Project (2017SHZDZX02); the Youth Innovation Promotion Association CAS (2020248); the Shanghai Sailing Program (20YF1455000); and the Shanghai Rising-Star Program (21QA1410200).

References

Nazarov, M. M., Mitrofanov, A. V., Sidorov-Biryukov, D. A., Chaschin, M. V., Shcheglov, P. A., Zheltikov, A. M., and Panchenko, V. Y., J. Infrared Millimeter Terahertz Waves 41, 1069 (2020).CrossRefGoogle Scholar
Gruse, J. N., Streeter, M. J. V., Thornton, C., Armstrong, C. D., Baird, C. D., Bourgeois, N., Cipiccia, S., Finlay, O. J., Gregory, C. D., Katzir, Y., Lopes, N. C., Mangles, S. P. D., Najmudin, Z., Neely, D., Pickard, L. R., Potter, K. D., Rajeev, P. P., Rusby, D. R., Underwood, C. I. D., Warnett, J. M., Williams, M. A., Wood, J. C., Murphy, C. D., Brenner, C. M., and Symes, D. R., Nucl. Instrum. Methods Phys. Res. Sect. A 983, 164369 (2020).CrossRefGoogle Scholar
Di Piazza, A., Muller, C., Hatsagortsyan, K. Z., and Keitel, C. H., Rev. Mod. Phys. 84, 1177 (2012).CrossRefGoogle Scholar
Krausz, F. and Ivanov, M., Rev. Mod. Phys. 81, 163 (2009).CrossRefGoogle Scholar
Tajima, T. and Mourou, G., Phys. Rev. Spec. Top. Accel. Beams 5, 031301 (2002).CrossRefGoogle Scholar
Mourou, G. and Tajima, T., Eur. Phys. J. Spec. Top. 223, 979 (2014).CrossRefGoogle Scholar
Li, W., Gan, Z., Yu, L., Wang, C., Liu, Y., Guo, Z., Xu, L., Xu, M., Hang, Y., Xu, Y., Wang, J., Huang, P., Cao, H., Yao, B., Zhang, X., Chen, L., Tang, Y., Li, S., Liu, X., Li, S., He, M., Yin, D., Liang, X., Leng, Y., Li, R., and Xu, Z., Opt. Lett. 43, 5681 (2018).CrossRefGoogle Scholar
Danson, C. N., Haefner, C., Bromage, J., Butcher, T., Chanteloup, J. C. F., Chowdhury, E. A., Galvanauskas, A., Gizzi, L. A., Hein, J., Hillier, D. I., Hopps, N. W., Kato, Y., Khazanov, E. A., Kodama, R., Korn, G., Li, R. X., Li, Y. T., Limpert, J., Ma, J. G., Nam, C. H., Neely, D., Papadopoulos, D., Penman, R. R., Qian, L. J., Rocca, J. J., Shaykin, A. A., Siders, C. W., Spindloe, C., Szatmari, S., Trines, R. M. G. M., Zhu, J. Q., Zhu, P., and Zuegel, J. D., High Power Laser Sci. Eng. 7, e54 (2019).CrossRefGoogle Scholar
Papadopoulos, D. N., Zou, J. P., Le Blanc, C., Chériaux, G., Georges, P., Druon, F., Mennerat, G., Ramirez, P., Martin, L., Fréneaux, A., Beluze, A., Lebas, N., Monot, P., Mathieu, F., and Audebert, P., High Power Laser Sci. Eng. 4, e34 (2016).CrossRefGoogle Scholar
Zuegel, J. D., Bahk, S. W., Begishev, I. A., Bromage, J., Dorrer, C., Okishev, A. V., and Oliver, J. B., in CLEO (Optica Publishing Group, 2014), paper JTh4L.4.Google Scholar
Lu, X., Peng, Y., Li, Y., Wang, X., Guo, X., Xu, Y., and Leng, Y., High Power Laser Sci. Eng. 4, e43 (2016).CrossRefGoogle Scholar
Yoon, J. W., Kim, Y. G., Choi, I. W., Sung, J. H., Lee, H. W., Lee, S. K., and Nam, C. H., Optica 8, 630 (2021).CrossRefGoogle Scholar
Inoue, S., Maeda, K., Tokita, S., Mori, K., Teramoto, K., Hashida, M., and Sakabe, S., Appl. Opt. 55, 5647 (2016).CrossRefGoogle Scholar
Arikawa, Y., Kojima, S., Morace, A., Sakata, S., Gawa, T., Taguchi, Y., Abe, Y., Zhang, Z., Vaisseau, X., Lee, S. H., Matsuo, K., Tosaki, S., Hata, M., Kawabata, K., Kawakami, Y., Ishida, M., Tsuji, K., Matsuo, S., Morio, N., Kawasaki, T., Tokita, S., Nakata, Y., Jitsuno, T., Miyanaga, N., Kawanaka, J., Nagatomo, H., Yogo, A., Nakai, M., Nishimura, H., Shiraga, H., Fujioka, S., Group, F., Group, L., Azechi, H., Sunahara, A., Johzaki, T., Ozaki, T., Sakagami, H., Sagisaka, A., Ogura, K., Pirozhkov, A. S., Nishikino, M., Kondo, K., Inoue, S., Teramoto, K., Hashida, M., and Sakabe, S., Appl. Opt. 55, 6850 (2016).CrossRefGoogle Scholar
Hillier, D., Danson, C., Duffield, S., Egan, D., Elsmere, S., Girling, M., Harvey, E., Hopps, N., Norman, M., Parker, S., Treadwell, P., Winter, D., and Bett, T., Appl. Opt. 52, 4258 (2013).CrossRefGoogle Scholar
Ramirez, L. P., Papadopoulos, D. N., Pellegrina, A., Georges, P., Druon, F., Monot, P., Ricci, A., Jullien, A., Chen, X., Rousseau, J. P., and Lopez-Martens, R., Opt. Express 19, 93 (2011).CrossRefGoogle Scholar
Jullien, A., Albert, O., Burgy, F., Hamoniaux, G., Rousseau, L. P., Chambaret, J. P., Auge-Rochereau, F., Cheriaux, G., Etchepare, J., Minkovski, N., and Saltiel, S. M., Opt. Lett. 30, 920 (2005).CrossRefGoogle Scholar
Jullien, A., Albert, O., Cheriaux, G., Etchepare, J., Kourtev, S., Minkovski, N., and Saltiel, S. M., J. Opt. Soc. Am. B 22, 2635 (2005).CrossRefGoogle Scholar
Khodakovskiy, N. G., Kalashnikov, M. P., Pajer, V., Blumenstein, A., Simon, P., Toktamis, M. M., Lozano, M., Mercier, B., Cheng, Z., Nagy, T., and Lopez-Martens, R., Laser Phys. Lett. 16, 095001 (2019).CrossRefGoogle Scholar
Smijesh, N., Zhang, X., Fischer, P., Muschet, A. A., Salh, R., Tajalli, A., Morgner, U., and Veisz, L., Opt. Lett. 44, 4028 (2019).CrossRefGoogle Scholar
Wang, Y. J. and Lutherdavies, B., J. Opt. Soc. Am. B 11, 1531 (1994).CrossRefGoogle Scholar
Li, Y. Y., Huang, Y. S., Wang, J. Z., Xu, Y., Lu, X. M., Wang, D., Leng, Y. X., Li, R. X., and Xu, Z. Z., Laser Phys. Lett. 10, 075403 (2013).CrossRefGoogle Scholar
Shen, Z.-W., Wang, Z.-H., Zhang, W., Fan, H.-T., Teng, H., and Wei, Z.-Y., Chin. Phys. Lett. 31, 014207 (2014).CrossRefGoogle Scholar
Manzoni, C. and Cerullo, G., J. Opt. 18, 103501 (2016).CrossRefGoogle Scholar
Bradler, M., Baum, P., and Riedle, E., Appl. Phys. B 97, 561 (2009).CrossRefGoogle Scholar
Riedel, R., Stephanides, A., Prandolini, M. J., Gronloh, B., Jungbluth, B., Mans, T., and Tavella, F., Opt. Lett. 39, 1422 (2014).CrossRefGoogle Scholar
Li, W. K., Chen, Y., Li, Y. Y., Xu, Y., Guo, X. Y., Lu, J., Wu, F. X., Wang, X. L., Li, S., and Leng, Y. X., J. Opt. Soc. Am. B 33, 2450 (2016).CrossRefGoogle Scholar
Baltuška, A., Fuji, T., and Kobayashi, T., Phys. Rev. Lett. 88, 133901 (2002).CrossRefGoogle Scholar
Figure 0

Figure 1 (a) Scheme of the 1053 nm laser source. PBS: polarization beam splitter; L: lens; NDF: neutral density filter; NOPA: noncollinear OPA. The linewidth indicates the beam size roughly and the shade indicates the pulse energy. (b) Schematic of the NOPA, where the angle between the signal and the pump is less than 0.7°.

Figure 1

Figure 2 (a) Spectra of NOPA2 output. The orange area is the amplified signal pulse and the green area is the idler pulse of NOPA2. The orange dashed line (simulated signal) and green dotted line (simulated idler) are the simulated spectra. The red area of the inset is the spectrum of the white light generated by YAG, and the jitter before 500 nm (gray area) may be caused by stray light of the spectrometer. The blue line of the inset is the amplified signal pulse of NOPA1. (b) Spectra of second-harmonic generation of the idler from NOPA2. The spectra fluctuate in the red area, and the middle solid line is the average value.

Figure 2

Figure 3 Pulse width of the output 1053 nm. (a) Measured FROG trace. (b) Retrieved FROG trace. (c) Retrieved spectral intensity (blue solid line), spectral phase (orange), and actual spectrum of 1053 nm (blue dashed line). (d) Retrieved temporal intensity (blue solid line), retrieved temporal phase (orange) and Fourier transform-limited pulse (blue dashed line). The grid sizes are 256 × 256.

Figure 3

Figure 4 (a) Temporal contrast of the initial 1030 nm (red line) and output 1053 nm (black line) pulses. The blue box indicates the noise level. (b) Details of the temporal contrast of the initial 1030 nm (red line) and output 1053 nm laser pulses (black line) at ±40 ps time.

Figure 4

Figure 5 The quality of the output 1053 nm beam. (a) The beam pointing stability. (b) The M2 quality of the output laser beam. (c) The power stability.