Hostname: page-component-848d4c4894-nmvwc Total loading time: 0 Render date: 2024-07-02T20:27:54.618Z Has data issue: false hasContentIssue false

Clay Mineral Synthesis — III Rapid Hydrothermal Crystallization of An Aluminian Smectite

Published online by Cambridge University Press:  01 July 2024

W. T. Granquist
Affiliation:
Baroid Division, N.L. Industries, Inc., Houston, Texas 77001, U.S.A.
G. W. Hoffman
Affiliation:
Baroid Division, N.L. Industries, Inc., Houston, Texas 77001, U.S.A.
R. C. Boteler
Affiliation:
Baroid Division, N.L. Industries, Inc., Houston, Texas 77001, U.S.A.

Abstract

An aluminian smectite with about one Al3+/Si4+ replacement per unit cell was batch- synthesized on a large scale (100-gal autoclave) at 3 00°C and 1240 psig with reaction times of several hours rather than days. This rapid crystallization was related to the use of NH4+ as the charge-balancing cation and to partial F/OH substitution. The short synthesis time prompted a study of continuous crystallization. Either of two techniques, flow through a stirred autoclave and through a multi-staged reactor column, produced crystalline product; neither gave the crystallinity of the batch process.

Résumé

Résumé

Une smectite alumineuse contenant environ un remplacement Al3+/Si4+ par maille a été synthétisée à grande échelle par un processus de lit mobile (autoclave de 100 gai) à 300°C et 1240 psig en nécessitant des temps de réaction de plusieurs heures au lieu de plusieurs jours. Cette cristallisation rapide a été reliée à l’utilisation de NH4+ comme cation compensateur et à une substitution partielle F/OH. Le temps de synthèse qui est court incite à étudier la cristallisation continue. Chacune des deux techniques suivantes, écoulement à travers un autoclave avec agitation et écoulement à travers un réacteur colonne à plusieurs étages, fournit un produit cristallin; aucune des deux ne donne la cristallinité du processus à lit mobile.

Kurzreferat

Kurzreferat

—Ein Aluminium-Smectit mit etwa einem Al3+/Si4+ Ersatz pro Einheitszelle wurde chargenmässig im Grossmaszstab (100 Gallonen Autoklav) bei 300°C und 1240 psig, mit Reaktionszeiten von einigen Stunden eher als Tagen, synthetisiert. Diese rapide Kristallisation stand in Beziehung zu der Verwendung von NH4+ als dem ladungsausgleichenden Kation und zu teilweisem F/OH Austausch. Die kurze Synthese veranlasste zu einer Studie kontinuierlicher Kristallisation. Jede der beiden Methoden: Strömung durch einen Rührautoklaven sowie durch eine mehrstufige Reaktor@@@kolonne, lieferte ein kristallines Produkt. Keine ergab die Kristallinität des Chargenprozesses.

Резюме

Резюме

Порция алюмомонтмориллонитовой глины с приблизительно одним Al3+/Si‘4+ обменом на единицу ячейки синтезировалась в крупногабаритном автоклаве емкостью 100 галлонов при температуре 300°С и давлении 1240 фунт/дюйм2 со временем реакции несколько часов, а не дней. Эта быстрая кристаллизация произошла благодаря использованию NH4+ в качестве балансирующего загрузку катиона и благодаря частичному замещению F/OH. Короткое время синтезирования повело к изучению непрерывной кристаллизации. По любому из этих методов, пропуску через перемешиваемый автоклав или через многоступенчатую реакционную колонну, получили кристаллический продукт, но ни тот ни другой метод не дали кристалличности периодического процесса.

Type
Research Article
Copyright
Copyright © Clay Minerals Society 1972

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Granquist, W. T., (1966) Synthetic silicate minerals U.S. Pat 3 252 757.Google Scholar
Granquist, W. T. and Pollack, S. S., (1967) Clay mineral synthesis —II. A randomly interstratified aluminian montmorillonoid Am. Mineralogist 52 212226.Google Scholar
Wright, A. C., Granquist, W. T. and Kennedy, J. V., (1972) Catalysis by layer lattice silicates —I. The structure and thermal modification of a synthetic ammonium dioctahedral clay J. Catalysis 25 6580.CrossRefGoogle Scholar