Hostname: page-component-77c89778f8-gvh9x Total loading time: 0 Render date: 2024-07-22T01:47:52.775Z Has data issue: false hasContentIssue false
  • English
  • Français

A numerical study of high pressure turbine forced response in the presence of damaged nozzle guide vanes

Published online by Cambridge University Press:  03 February 2016

L.di Mare ,
M. Imregun ,
A. D. Smith  and
R. Elliott
L.di Mare
Affiliation:
Vibration UTC, Mechanical Engineering Department, Imperial College London, London
M. Imregun
Affiliation:
Vibration UTC, Mechanical Engineering Department, Imperial College London, London
A. D. Smith
Affiliation:
Rolls-Royce, Turbines – Design Engineering, Derby, UK
R. Elliott
Affiliation:
Rolls-Royce, Turbines – Design Engineering, Derby, UK
Get access Rights & Permissions [Opens in a new window]

Abstract

This paper reports results from numerical computations of low engine order and blade-passing forced response on the rotor of a high pressure turbine due to severe damage to a single nozzle guide vane. The computations are performed using a time-domain, nonlinear viscous compressible flow simulation code. The flow and the levels of forcing for a few selected modes are compared for the undamaged and the damaged configurations. The results show that the response in various modes is affected to a different extent by the damage. The main blade-passing response was found to be largely unaffected, if not marginally reduced. On the other hand, the vibration levels for some modes were seen to be up to eight times higher because of the low-order excitation harmonics created by the damaged passage.

Type
Research Article
Information
The Aeronautical Journal , Volume 111 , Issue 1125 , November 2007 , pp. 751 - 757
Copyright
Copyright © Royal Aeronautical Society 2007 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Brown, J.M. and Grandhi, R.V.. Probabilistic analysis of geometric uncertainty effects on blade-alone forced response. Proceedings of the ASME Turbo Expo 2004.Google Scholar
2. Teichman, H.C. and Tadros, R.N.. Analytical and experimental simulation of fan blade behaviour and damage under bird impact. ASME-GT-90-126.Google Scholar
3. Phillips, E.H.. Bird-strike threat draws new warning, Aviation Weekly and Space Technology, 144, (6), pp 54–56.Google Scholar
4. Mueck, B.. Rolls-Royce plc, Private communication 2006.Google Scholar
5. Sayma, A.I. and Kim, M., Smith, N.H.. Leading-edge shape and aeroengine fan performance, AIAA J Propulsion and Power, 2003, 19, (3), pp 516–519.Google Scholar
6. Vahdati, M., Sayma, A.I. and Imregun, M.. An integrated nonlinear approach for turbomachinery forced response prediction. Part II: Case studies. Journal Fluids and Structures, 2000, 14, (1), pp 103–125.Google Scholar
7. Breard, C., Green, J.H. and Imregun, M.. Low-engine-order excitation mechanisms in axial-flow turbomachinery, AIAA J Propulsion and Power, 2003, 19, (4), pp 704–712.Google Scholar
8. Naeem, M., Singh, R. and Probert, D.. Implications of engine deterioration for a high-pressure turbine-blade’s low-cycle fatigue (LCF) life-consumption, Int J of Fatigue, 1999, 21, (8), pp 831–847.Google Scholar
9. Sidewell, V. and Darmofal, D.. The impact of blade-to-blade flow variability on turbine blade cooling performance. J Turbomachinery, 2005, 127, pp 765–770.Google Scholar
10. Vahdati, M., Sayma, A.I. and Imregun, M.. An integrated nonlinear approach for turbomachinery forced response prediction. Part I: Formulation, J Fluids and Structures, 2000, 14, (1), pp 87–101.Google Scholar
11. Vahdati, M., Sayma, A.I., Marshall, J.G. and Imregun, M.. Mechanisms and prediction methods for fan blade stall flutter J Propulsion and Power, 2001, 17, (5), pp 1100–1108.Google Scholar
12. Sayma, A.I., Vahdati, M., Lee, S.J. and Imregun, M.. Forced response analysis of a shaft-driven lift fan; Proceedings of the IMechE, Part C: J Mechanical Engineering Science, 217, (10), pp 1125–1138.Google Scholar
13. Sayma, A.I., Breard, C. and Vahdati, M. and Imregun, M.. Aeroelasticity analysis of air-riding seals for aero-engine applications, J Tribology, 124, (3), pp 607–616.Google Scholar
14. Sbardella, L., Sayma and, A.I., Imregun, M.. Semi-structured meshes for axial turbomachinery blades, Int J for Numerical Methods in Fluids, 2000, 32, (5), pp 569–584.Google Scholar
15. Sayma, A.I., Vahdati, M., Sbardella, L. and Imregun, M.. Modeling of three-dimensional viscous compressible turbomachinery flows using unstructured hybrid grids. AIAA J, 2000, 38, (6), pp 945–954.Google Scholar
16. Green, J.S., and Fransson, T.. Scaling of boundary conditions for turbine forced response calculations ASME-GT-06-1234 Google Scholar