Hostname: page-component-7479d7b7d-68ccn Total loading time: 0 Render date: 2024-07-08T11:13:41.988Z Has data issue: false hasContentIssue false

A Note on the Causes of Thin Aerofoil Stall

Published online by Cambridge University Press:  04 July 2016

T. W. F. Moore*
Affiliation:
formerly Department of Aeronautical Engineering, University of Southampton, now , Guided Weapon Department, Bristol Aircraft Ltd.

Extract

Recent Researches have led to some possible explanations for thin aerofoil stalling behaviour. Apart from the Owen Klanfer criterion these are the reverse flow breakdown hypothesis of McGregor and Wallis's turbulent separation theory.

This note describes simple theoretical boundary layer calculations which indicate the feasibility of Wallis's hypothesis. In addition the results of some experiments on a thin two-dimensional aerofoil with various leading edge configurations with Reynolds number, based on model chord, of 1.8 million and 1 million support either of these hypotheses, depending on the leading edge configuration. It is concluded that thin aerofoil stall can occur broadly, through either of the suggested mechanisms, depending on conditions in the nose region.

Type
Technical Notes
Copyright
Copyright © Royal Aeronautical Society 1959

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Owen, P. R. and Klanfer, L. (1953). Note on the Laminar Boundary-Layer Separation (Leading Edge of a Thin Aerofoil). R.A.E. Report Aero 2508, November 1953.Google Scholar
2.McGregor, I. (1954). Regions of Localised Boundary Layer Separations and their Role in the Nose Stalling of Thin Aerofoils. Ph.D. Thesis. Queen Mary College, London, June 1954.Google Scholar
3.Wallis, R. A. The Turbulent Boundary Layer on the Articulated Nose of a Thin Wing provided with Air Jets. A.R.L. Note A.141.Google Scholar
4.Wallis, R. A. (1953). Experiments with Air Jets to Control the Nose Stall on a 3 ft. chord NACA 64A006 Aerofoil. A.R.C. 17,311, Janury 1953.Google Scholar
5.Wallis, R. A. and Ruglen, N. Note on the Breakdown of the Laminar Separation Bubble on the Nose of a Thin Wing. N.P.L. Aero Note (unpublished).Google Scholar
6.Crabtree, L. F. (1954). The Formation of Regions of Separated Flow on Wing Surfaces. Part I. Low Speed Tests on a Two Dimensional Wing with a 10% thick R.A.E. Section. R.A.E. Report, November 1954.Google Scholar
7.Crabtree, L. F. (1957). The Formation of Regions of Separated Flow on Wing Surfaces. Part 2. Laminar Separation Bubbles and the Mechanism of the Leading Edge Stall. R.A.E. Report No. 2578, July 1957.Google Scholar
8.McCullough, G. B. and Gault, D. E. (1949). Boundary Layer and Stalling Characteristics of the N.A.C.A. 64A006 Airfoil Section. N.A.C.A. T.N. 1923, 1949.Google Scholar
9.Gault, D. E. (1949). Boundary Layer and Stalling Characteristics of the N.A.C.A. 63-009 Aerofoil Section. N.A.C.A. T.N. 1894, August 1949.Google Scholar
10.Gault, D. E. (1955). An Experimental Investigation of Regions of Separated Laminar Flow. N.A.C.A. T.N. 3505, September 1955.Google Scholar
11.Von Doenhoff, A. E. and Tetervin, N. Determination of General Relations for the Behaviour of Turbulent Boundary Layers. N.A.C.A. Report 772.Google Scholar
12.Peterson, R. F. (1950). Boundary Layer and Stalling Characteristics of the N.A.C.A. 64A010 Airfoil Section. N.A.C.A. T.N. 2235, 1950.Google Scholar
13.McCullough, G. B. and Gault, D. E. (1951). Examples of Three Representative Types of Airfoil Section Stall at Low Speed. N.A.C.A. T.N. 2502, 1951.Google Scholar
14.Norbury, J. and Crabtree, L. F. (1953). A Simplified Model of the Incompressible Flow past Aerofoils with a Long Bubble Type of Flow Separation. R.A.E. Tech. Note No. Aero 2352, 1953.Google Scholar