Hostname: page-component-77c89778f8-9q27g Total loading time: 0 Render date: 2024-07-17T01:11:14.421Z Has data issue: false hasContentIssue false
  • English
  • Français

Experiments on the reduction of base drag of a blunt trailing edge aerofoil in subsonic flow

Published online by Cambridge University Press:  04 July 2016

S. L. Gai  and
S. D. Sharma
S. L. Gai
Affiliation:
Aeronautical Engineering Department, Indian Institute of Technology, Bombay
S. D. Sharma
Affiliation:
Aeronautical Engineering Department, Indian Institute of Technology, Bombay
Get access Rights & Permissions [Opens in a new window]

Extract

It has been pointed out by a number of investigators that aerofoils with blunt trailing edges have many advantages, both structural and aerodynamic, at transonic and supersonic speeds. However, a profile with a blunt trailing edge unfortunately creates a high base drag at subsonic speeds and this could result in the total drag being considerably higher than that for a profile with a sharp trailing edge. This base drag arises due to the periodic vortex shedding from the blunt base which causes low pressures in the wake thus creating the base drag.

In order to reduce the base drag of a blunt trailing edge at subsonic speeds, this periodic vortex shedding must be suppressed. This has been achieved by various methods — a splitter plate behind the base, the base bleed, base cavities — and these have shown varying degrees of drag reduction.

Type
Research Article
Information
The Aeronautical Journal , Volume 85 , Issue 844 , May 1981 , pp. 206 - 210
Copyright
Copyright © Royal Aeronautical Society 1981 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Pearcey, H. H. The aerodynamic design of section shapes for swept wings. Advances in Aeronautical Sciences, Vol 3, Pergamon Press, 1962.Google Scholar
2. Holder, D. W. The transonic flow past two dimensional aerofoils, Journal of the Royal Aeronautical Society, Vol 68, p 501, 1964.Google Scholar
3. Nash, J. F. Experiments on two-dimensional base flow at subsonic and transonic speeds. ARC, R&M No 3427, 1966.Google Scholar
4. Bearman, P. W. Investigation of the flow behind a two-dimensional model with blunt trailing edge and fitted with splitter plates. J. Fluid Mech., Vol 21, p 241, 1965.Google Scholar
5. Wood, C. J. The effect of base bleed on a periodic wake. Journal of the Royal Aeronautical Society, Vol 68, p 477, 1964.Google Scholar
6. Bearman, P. W. The effect of base bleed on the flow-behind two-dimensional model with a blunt trailing edge. The Aero nautical Quarterly, Vol 18, p 207, 1967.Google Scholar
7. Nash, J. F. A discussion of two dimensional turbulent base flows. ARC, R&M No 3468, 1967.Google Scholar
8. Tanner, M. A method for reducing the base drag of wings with blunt trailing edge. The Aeronautical Quarterly, Vol 23, p 15, 1972.Google Scholar
9. Tanner, M. New investigations for reducing the base drag of wings with a blunt trailing edge. AGARD Paper No 124, Proceedings of the Conference on ‘Aerodynamic Drag’.Google Scholar
10. Pollock, N. Segmented blunt trailing edges at subsonic and transonic speeds. ARL Rept No 137, 1972.Google Scholar
11. Stansby, P. K. The effect of end plates on the base pressure coefficient of a circular cylinder. The Aeronautical Journal of the RAeS, Vol 78, p 36, 1974.Google Scholar
12. Bellhouse, B. J. and Wood, C. J. The upstream influence of base bleed on surface pressures and skin friction. Journal of the Royal Aeronautical Society, Vol 69, p 789, 1965.Google Scholar
13. Nash, J. F. A review of research on two-dimensional base flow, ARC, R&M No 3323, 1963.Google Scholar
14. Schlischiting, H. Boundary Layer Theory, p 536, McGraw Hill Book Co, 1960.Google Scholar
15. Kuethe, A. M. Effect of streamwise vortices on wake properties associated with sound generation. J. Aircraft, Vol 9, No 10, p745, 1972.Google Scholar