Hostname: page-component-848d4c4894-m9kch Total loading time: 0 Render date: 2024-06-09T11:19:23.439Z Has data issue: false hasContentIssue false

Elastic Stability of Cylindrical Shells under Axial and Lateral Loads

Published online by Cambridge University Press:  04 July 2016

C. Lakshmikantham
Affiliation:
Allied Research Associates Inc., Concord, Mass.
George Gerard
Affiliation:
Allied Research Associates Inc., Concord, Mass.

Extract

In the stability analysis of cylinders under external loading, the axial compression and lateral pressure cases are relatively well established: see, for example, ref. 1. However, from a design point of view, a biaxial system of forces due to a combination of axial compression and external pressure is often encountered in launch vehicle structures. While many other combined loading cases have appeared in the literature, the case under present consideration has not; therefore, this note is devoted to a general treatment of this problem. It is to be noted that Radhakrishnan presented some specific results for this loading combination for elastic and plastic buckling.

Using the Donnell equation for small deformations, the present report considers the effect of various compressive loading combinations on the stability problem of an un-stiffened circular cylinder.

Type
Technical Notes
Copyright
Copyright © Royal Aeronautical Society 1964

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Gerard, G.Introduction to Structural Stability Theory, Chs. 7 and 8. McGraw-Hill Book Co., Inc., New York, 1962.Google Scholar
2.Radhakrishnan, S.Plastic Buckling of Cylindrical Shells. Aircraft Engineering, pp. 365372, December 1959. CrossRefGoogle Scholar