Hostname: page-component-848d4c4894-nmvwc Total loading time: 0 Render date: 2024-06-29T00:47:05.314Z Has data issue: false hasContentIssue false
  • English
  • Français

Aircraft Metallic Materials Under Low Temperature Conditions

Published online by Cambridge University Press:  28 July 2016

P. L. Teed
Get access Rights & Permissions [Opens in a new window]

Extract

The ubiquity of aircraft in being and yet to be, whether civil or military, manned or unmanned, makes them liable to exposure to wide extremes of atmospheric conditions. The range of temperature to which they may be subjected may possibly be from +90° to –90°C. (+194° to –130°F.), that of pressure, from one atmosphere to something approximating to one-tenth of this amount, while the water content (aqueous vapour plus water in suspension; for example, in a very dense tropical cloud), can, on occasion, be as high as 2.5 per cent. by weight and, at stratospheric heights, at least as low as 0.001 per cent. Such variations in ambient conditions are not without chemical and physical repercussions. The engineering problems which arise will be examined, therefore, from both these view points, and attention will be drawn to potential dangers and means suggested for their avoidance.

Type
Research Article
Information
The Aeronautical Journal , Volume 55 , Issue 482 , February 1951 , pp. 61 - 86
Copyright
Copyright © Royal Aeronautical Society 1951

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Baker, H. B. The Union of Hydrogen and Oxygen, Transactions of the Chemical Society, vol. 81, April 1902.CrossRefGoogle Scholar
2. van Brunt, C. and Savage, R. H. Carbon Brush Contact Films, General Electric Review, vol. 47, Nos. 7 and 8, 1944.Google Scholar
Hambleton, T. T. Commutator, Collector Ring and Brush Performance, General Electric Review, vol, 48, No. 4, 1945.Google Scholar
Savage, R. H. Carbon Brush Contact Films, General Electric Review, vol. 48, No. 10, 1945.Google Scholar
Savage, R. H. Graphite Lubrication, Journal of Applied Physics, vol. 19, No. 1, 1948.CrossRefGoogle Scholar
Fulham, E. F. and Savage, R. H. Carbon Film Formation and Commutator Brush Wear as revealed by the Electron Microscope, Journal of Applied Physics, vol. 19, No. 7, 1948.Google Scholar
3. Campbell, W. E. and Kozak, Rose. Studies in Boundary Lubrication, Part III: Wearing of Carbon Brushes in Dry Atmospheres, Transactions of the American Society of Mechanical Engineers, vol. 70, No. 5, 1948.Google Scholar
4. Elsey, H. M. Treatment of High Altitude Brushes by Application of Metallic Halides, Electrical Engineering, vol. 64, No. 8, 1945.CrossRefGoogle Scholar
5. Dyment, J. T. Some Tricks in Cold Weather Operation, Journal of Society of Automotive Engineers, January 1950.CrossRefGoogle Scholar
6. Homer, C. E. and Watkins, H. C. Transformation of Tin at Low Temperatures, Metal Industry, 60, 22, 1942.Google Scholar
7. Zambrow, J. L. and Fontana, M. G. Mechanical Properties, including Fatigue of Aircraft Alloys at very low Temperatures, American Society for Metals, Vol. XLI, 1949.Google Scholar
8. Bollenrath, J. F. On the Influence of Temperature on the Elastic Behaviour of Various Wrought Light Metal Alloys, Journal of the Institute of Metals, 48, No. 1, 1932.Google Scholar
9. Keating, F. H. and Mathias, E. V. The Use of Mild Steel for Service at Sub-Zero Temperatures, Institution of Mechanical Engineers, Applied Mechanics, Proceedings, vol. 163, 1950 (W.E.P. No. 55).Google Scholar
10. Kahn, N. A. and Imbembo, E. A. Discussion of A. B. Bagsar's paper: Development of Cleavage Fractures in Mild Steels, Transactions of American Society of Mechanical Engineers, vol. 70, No. 7, October 1948.Google Scholar
11. Davidenkov, N. and Shewandin, E. Ober den Ermudungsriss, Metallwirtschaft, 10 (37), Part II, 1931.Google Scholar
12. Oshiba, F. The Degree of Fatigue and Recovery Therefrom of Carbon Steels under Repeated Impacts, Sci. Rep. Tohoku Imp. Univ. (Sendai, Japan), 1st Ser., 23 (4), November 1934.Google Scholar
The Degree of Fatigue of Carbon Steels under Reversed Bendings, Ibid, 1st Ser., 26 (3), December 1937.Google Scholar
13. MacGregor, C. W. Significance of Transition Temperature in Fatigue, Conference on Fatigue and Fracture, Massachusetts Institute of Technology, June 1950.Google Scholar
14. Barr, W. and Honeyman, A. J. Effect of the Manganese/Carbon Ratio on the Brittle Fracture of Mild Steel, Journal of the Iron and Steel Institute, 157, Part 2, 1947.Google Scholar
15. De Haas, W. J. and Hadfield, R. A. On the Effect of the Temperature of Liquid Hydrogen on the Tensile Properties of 41 Metals, Philosophic Transactions of the Royal Society, A, 715, 1933.Google Scholar
Strauss, and Maurer, . Die Hochlegierten Chromnickelstahle als Nichtrostende Stahle, Kruppsche Monatshefte, August 1920.CrossRefGoogle Scholar
Colbeck, E. W., MacGillivray, W. E. and Manning, W. D. The Mechanical Properties of some Austenitic Stainless Steels at Low Temperatures, Transactions of Institute of Chemical Engineers, 11, 1933.Google Scholar
16. Gillett, H. W. Impact Resistance and Tensile Properties of Metals at Sub-atmospheric Temperatures, Project No. 13 of the Joint A.S.M.E./A.S.T.M. Research Committee, August 1941.CrossRefGoogle Scholar
17. Zambrow, J. L. and Fontana, M. G. Mechanical Properties, including Fatigue of Aircraft Alloys at very Low Temperatures, American Society for Metals, Vol. XLI, 1949.Google Scholar
18. Colbeck, E. W. and MacGillivray, W. E. The Mechanical Properties of Metals at Low Temperatures, Part II: Non-Ferrous Materials, Transactions of the Institute of Chemical Engineers, 11, 1933.Google Scholar
19. Gensamer, M. Strength of Metals under Combined Stresses, American Society for Metals, 1941.Google Scholar
20. Holloman, J. H. The Notched Bar Impact Test, Transactions of the American Institute of Mining and Metallurgical Engineers, Iron and Steel Division, 158, 1944.Google Scholar