Hostname: page-component-76fb5796d-qxdb6 Total loading time: 0 Render date: 2024-04-26T14:18:51.071Z Has data issue: false hasContentIssue false
  • English
  • Français

X-Ray Studies of Plastically Deformed Silver Alloys - Effects Due to Oxygen, Hydrogen, and Tin Solutes*

Published online by Cambridge University Press:  06 March 2019

C. J. Newton  and
A. W. Ruff Jr.
C. J. Newton
Affiliation:
National Bureau of Standards, Washington, D. C. 20234
A. W. Ruff Jr.
Affiliation:
National Bureau of Standards, Washington, D. C. 20234
Get access

Abstract

Solid specimens of silver were charged at different temperatures in atmospheres of oxygen and of hydrogen. X-ray diffraction line profiles were obtained using powders filed from the treated specimens. Fourier analysis of the diffraction lines was conducted following the method of Warren. The effective particle sizes and root-mean-square strains were obtained from the line shape analysis. Stacking fault and twin fault probabilities were determined from peak-position and center-of gravity displacements, respectively. For the purpose of comparison, two vacuum-melted silver samples and two different silver-tin alloys were studied. The stacking fault and twin fault probabilities were observed to be nearly unaffected by charging in either oxygen or hydrogen. These results are consistent with recent direct determinations of the effect of oxygen on the stacking fault energy of silver. In contrast, the rms strains and particle sizes changed significantly after charging in oxygen. A decrease in the root-mean-square strain and a corresponding increase in the particle size was found. These effects were opposite to those obtained by adding substitutional solute to silver. These findings are interpreted to indicate the effect of oxygen clustered with impurities on the dislocations and stacking faults in silver.

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 12: Seventeenth Annual Conference on Applications of X-ray Analysis, August 21-23, 1968 , 1968 , pp. 316 - 328
Copyright
Copyright © International Centre for Diffraction Data 1968

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

Contribution of the National Bureau of Standards, Not Subject to Copyright.

References

1. Warren, B. E., “X-ray Studies of Deformed Metals”, Progress in Metal Physics 8:147–202, 1959.Google Scholar
2. Wagner, C. N. J., “Analysis of the Broadening and Changes in Position of Peaks in an X-ray Powder Pattern”, in Local Atomic Arrangements Studied by X-ray Diffraction, J. B. Cohen and J. E. Hilliard, Eds., Gordon and Breach, New York, 1967, p. 219.Google Scholar
3. Mikkola, D. E. and Cohen, J. B.., “Examples of Applications of Line Broadening”, in Local Atomic Arrangements Studied by X-ray Diffraction, J. B. Cohen and J. E. Hilliard, Eds., Gordon and Breach, New York, 1967, p. 289.Google Scholar
4. Newton, C. J. and Ruff, A. W. Jr., “X-ray Diffraction Measurements of Stacking Faults in Alpha Silver-Tin Alloys”, J. Appl. Phys. 37 :3860–3868, 1966.Google Scholar
5. Ruff, A. W. Jr., “Stacking Fault Studies in Silver Alloys” First NBS Materials Research Symposium, NBS Monograph 100, 1967, p .554.Google Scholar
6. Ruff, A. W. Jr. and Ives, L. K. “Dislocation Node Determinations of the Stacking Fault Energy in Silver-Tin Alloys”, Acta Met. 15:189–198, 1967.Google Scholar
7. Klein, M. J., Brimhall, J. L., and Huggins, R. A., “Stacking Faults in Plastically Deformed Dilute Silver Alloys”, Acta. Met. 10:13–15, 1962.Google Scholar
8. Ives, L. K. and Ruff, A. W. Jr., “Studies of the Effect of Annealing on Extended Dislocation Nodes in Silver-Tin Alloys” Phys. Stat. Sol. 27:117–123, 1968.Google Scholar
9. deAngelis, R. J., “Evaluation from X-ray Diffraction Profiles of Fourier Coefficients and the Microstrain Distribution Function”, in Local Atomic Arrangements Studied by X-ray Diffraction, J. B. Cohen and J. E. Hilliard, Eds., Gordon and Breach, New York, 1967, p. 271.Google Scholar
10. Cohen, J. B. and Wagner, C. N. J., “Determination of Twin Fault Probabilities from the Diffraction Patterns of fee Metals and Alloys”, J. Appl. Phys. 33: 2073–2077, 1962.Google Scholar
11. Adler, R. P. I. and Wagner, C. H. J., ‘X-ray Diffraction Study of the Effects of Solutes on the Occurrence of Stacking Faults in Silver-Base Alloys”, J. Appl. Phys. 33:3451–3458, 1962.Google Scholar
12. Eichenauer, W. and Muller, G., “Diffusion and solubility of Oxygen in Silver”, Z. Metallkunde 53 :321–324, 1962.Google Scholar
13. Chaston, J. C., in “Silver, Economics, Metallurgy, and Use,” Eds. A. Butts and C. D. Coxe, Van Nostrand, New Jersey, 1967, p. 304.Google Scholar
14. Hansen, M., “Constitution of Binary Alloys”, McGraw-Hill, New York, 1958.Google Scholar
15. Rudee, M. L. and Huggins, R. A., “The Effect of Hydrogen on the Stacking Fault Probability in Copper”, Phys. Stat. sol. 4:K101-K103, 1964.Google Scholar
16. Tardiff, G. E. and Hendrickson, A. A., “On the Strength of Silver-Base Solutions”, Trans. AIME 230: 586–587, 1964.Google Scholar
17. Hendrickson, A. A. and Fine, M. E., ‘’Solid Solution Strengthening of Ag by Al”, Trans AIME 221:967–974, 1961.Google Scholar
18. Frye, J. H. and Hume-Rothery, W., “The Hardness of Primary Solid Solutions with Special Reference to Alloys of Silver”, Proc. Roy. Soc. A181:1–14, 1942.Google Scholar
19. Ahlers, M., “The Influence of Small Amounts of Oxygen on the Plasticity of Silver Single Crystals”, Z. Metallkunde 56: 741–750, 1965.Google Scholar
20. Ramaswami, B., “Work Hardening of Internally Oxidized Silver and Silver-Aluminum Alloy Single Crystals”, Trans. AIME 233: 1191–1192, 1965.Google Scholar