Hostname: page-component-77c89778f8-sh8wx Total loading time: 0 Render date: 2024-07-18T19:23:30.350Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermal Expansion of Alpha-Alumina

Published online by Cambridge University Press:  06 March 2019

William J. Campbell  and
Clark Grain
William J. Campbell
Affiliation:
Bureau of Mines, U.S. Department of the Interior, Metallurgy Research Center, College Park, Maryland
Clark Grain
Affiliation:
Bureau of Mines, U.S. Department of the Interior, Metallurgy Research Center, College Park, Maryland
Get access

Abstract

High-temperature X-ray diffractometer measurements by the Bureau showed that alpha-alumina expands anisotropically with expansion parallel to the c axis approximately 10% greater than that parallel to the a axis. Thermal-expansion characteristics of four different alumina samples were determined up to 1200°C; the results are presented in both tabular and graphical form. The combined random and systematic errors in the measurements are considered less than 3% above 500°C and approximately 2% at 1000°C. No differences in expansion were observed between the samples or between the heating and cooling cycles.

Critical evaluation of the literature showed that published values for thermal-expansion coefficients of single crystals vary over a range of 40% (relative values) and disagreement concerning whether expansion of alpha-alumina is isotropic or anisotropic. Systematic and experimental errors were found to be the principal factor for the variation in results, rather than differences in measuring techniques or in samples.

Published values for polycrystalline aggregates also varied. Two laboratories reported values 20–30% lower than those of the Bureau of Mines, but two other laboratories agree with the Bureau within 3–5% above 500°C.

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 5: Tenth Annual Conference on Applications of X-ray Analysis, August 7-9, 1961 , 1961 , pp. 244 - 256
Copyright
Copyright © International Centre for Diffraction Data 1961

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Austin, J. B., “Thermal Elusion of Nonmetallic Crystals,” J. Am. Ceram. Soc., Vol. 35, 1952, pp. 243–253.Google Scholar
2. Mauer, F. A. and Bolz, L. H., “Measurement of Thermal Expansion of Cermet Components by High-Temperature X-Ray Diffraction,” WADC Tech. Rept, 55-473, 1955, 57 pp; 55-473 Supplemt. No. 1, 1957, 47 pp.Google Scholar
3. Campbell, W. J., Stecura, S., and Grain, C., “High-Temperature Furnaces for X-ray Diffractometers,” Bureau of Mines Rept. of Investigations 5738, 1960.Google Scholar
4. Klein, D. J., “Measurement of the Crystallographic Thermal Expansion of Alpha-Alumina and Beryllia to Elevated Temperatures Emphasizing Anisotropic Effects, “ NAA-SR-2542, Atomics International, Canoga Park, Calif., 1958, 24 pp.Google Scholar
5. Austin, J. B., “The Thermal Expansion of Some Refractory Oxides,” J. Am. Ceram. Soc, Vol. 14, 1931, p. 795.Google Scholar
6. Engberg, C. J. and Zehms, E. H., “Thermal Expansion of Al2O3, BeO, MgO, B4C, SiC, and TiC Above 1000°C,” J. Am. Ceram. Soc., Vol. 42, 1959, p. 300.Google Scholar
7. Wittemore, O. J. Jr. and Ault, N. N., “Thermal Expansion of Various Ceramic Materials co 1500°C,” J. Am. Ceram. Soc, Vol. 39, 1956, pp, 443–444.Google Scholar
8. Dtiwez, P., Odell, F., and Taylor, J. L., “Physical Properties of Refractory Materials for Rocket Chamber Liners,” ATI 23217, Jet Propulsion Laboratory, California Institute of Technology, Pasadena, Calif., 1947, 70 pp.Google Scholar
9. Bussem, W., “Expansion Measurements of Crystalline Bodies by X-ray Method,” Ber. deut. Keram. Ges., Vol. 16, 1935, p. 381.Google Scholar
10. Creamer, A. S., “Percent Expansion of Single Crystal Alumina, Rods From 50 to 1700°C,” Natl. Bur. Standards (O.S.) Record Notebook, 1944, p. 113.Google Scholar
11. Geller, R. F. and Yavorstcy, P. J., “Effects of Some Oxide Additions on the Thermal-Length Changes of Zirconia,” J. Research Natl. Bur. Standards (U.S.), Vol. 35, 1945, pp. 87–110.Google Scholar
12. Rachal, L. H., Memorandum No. 2987, Atomics International, August 1958, 8 pp.Google Scholar
13. Sharma, S. S., “Thermal Expansion of Crystals,” Proc. Ind. Acad. Sci., Sect. A., Vol. 33, 1951, pp. 245–249.Google Scholar
14. Shalnikova, N. A. and Yakovlev, Y. A., “X-ray Determinations of Lattice Constants and Coefficients of Thermal Expansion for Leucosapphire and Ruby,” Kristallografiya, Vol. 1, 1956, pp. 531–533.Google Scholar
15. Beals, R. J. and Cook, R. L., “Directional Dilatation of Crystal Lattices at Elevated Temperatures,” J. Am. Ceram. Soc, Vol. 40, 1957, p. 279.Google Scholar
16. Swanson, H. E. and Fuyat, R. K., “Standard X-ray Diffraction Powder Patterns,” Natl. Bur. Standards (U. S.) Circ, 539, Vol. 2, 1953, pp. 20-23.Google Scholar
17. Zimmerman, W. F., “Measurement of the Lattice Dimensions of Refractory Crystals at Elevated Temperatures,” M. S. Thesis, University of Illinois, Urbana, Ill, 1952, 46 pp.Google Scholar