Hostname: page-component-76fb5796d-qxdb6 Total loading time: 0 Render date: 2024-04-25T08:22:50.833Z Has data issue: false hasContentIssue false
  • English
  • Français

A Study of Recrystallization Texture Formation in Cold Rolled Iron Sheets with X-Ray Diffraction Techniques

Published online by Cambridge University Press:  06 March 2019

M. Matsuo ,
S. Hayami  and
S. Nagashima
M. Matsuo
Affiliation:
Tokyo Research Institute, Nippon Steel Corporation, Kawasaki, Japan 211
S. Hayami
Affiliation:
Tokyo Research Institute, Nippon Steel Corporation, Kawasaki, Japan 211
S. Nagashima
Affiliation:
Tokyo Research Institute, Nippon Steel Corporation, Kawasaki, Japan 211
Get access

Abstract

The possibility that primary recrystallization textures are influenced by local inhomogeneities of deformation induced in the regions of grain boundaries has been confirmed by comparing the cold rolling and the annealing textures of polycrystalline pure irons which were different in the grain size prior to cold rolling. Analyses were made for the effects of deformation on crystals, namely storage of lattice strain and orientation spread, with application of X-ray diffraction techniques, in order to elucidate the role of in homogeneities of deformation on recrystallization texture formation. Apparent correspondence was found between the orientation dependence of stored strain energy and the textural change on recrystallization. This is a scribed to oriented nucleation in high energy blocks, in the case of originally large-grain material in which the effects of inhomogeneities of deformation are small. But discrepancies arise on this basis in originally small - grain material in which the effects of inhomogeneities of deformation are thought to be considerable. The discrepancy is inferred to arise as an effect of local inhomogeneities of deformation, from the change in the trend of rotational orientation spreads from, a stable orientation and the extent of development of potential nuclei of recrystallization at high energy blocks in the orientation spreads. The change is considered to give rise to the variation in amount of microstrain distribution, which is expressed in recovery characteristics of lattice strains and in the dependence of microstrains on the column length as analyzed by following the procedure of Warren-Averbach.

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 14: Nineteenth Annual Conference on Applications of X-ray Analysis, August 5-7, 1970 , 1970 , pp. 214 - 230
Copyright
Copyright © International Centre for Diffraction Data 1970

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Cahn, R. W., “A New Theory of Recrystallization Nuclei”, Proc. Phys. Soc. (London), 63A (1950), 323.Google Scholar
Decker, B. P. and Barker, D., “Relation Between Initial and Final Orientations in Rolling and Annealing of Silicon Ferrite”, J. Appl. Phys., 22 (1951), 900.Google Scholar
Taoka, T. et al., “Changes in Internal Energy Associated with Recovery and Recrystallization in Iron Silicon Alloy and Pure iron”. Acta Met., 13 (1965), 1311.Google Scholar
Hibbard, W. R. and Tully, W. R., “Effect of Orientation on the Recrystallization Kinetics of Cold Rolled Single Crystals”, Trans. Met. Sec. AIME, 221 (1961), 336.Google Scholar
Brasse, M. and Müller, H., “Röntgenographische Untersuchung über Verzerrungen und Teilchengrossen in Eisen und Stahl”, Archiv Eisen., 30 (1959), 685.Google Scholar
Wagner, C. N. J., Boisseau, J. P. and Aqua, E. N., “X- ray Study of Plastically Deformed Copper”, Trans. Met. Soc. AIME, 233 (1965), 1280.Google Scholar
Wever, P. and H., Bötticher, “Zur Frage der Gitterstorungen bei der Kaltverformung metallischer Werkstoffe”, Archiv Eisen., 34 (1963), 147.Google Scholar
Wever, S. F. and Bötticher, H., “Zur Frage des Abbaues von Textur und Gitterstörungen bei der Recrystallisation von kalt verformtem Weicheisen”, Archiv Eisan., 36 (1965), 935.Google Scholar
Hu, H., “Annealing of Silicon-Iron Single Crystals”, in Himmal, L., Editor, Recovery and Recrystallization of Metals, p. 311, Interscience Publisher, New York, 1963.Google Scholar
Takechi, H., Kato, H. and Nagashima, S., “Rolling and Annealing Textures of Low Carbon Steel Sheets”, Trans. Met. Soc. AIME, 242 (1968).Google Scholar
Kato, E. and Takechi, H., “On the X- ray Diffraction Line Profiles from Filed Iron Powder”, Preprint of the Symposium on X- ray Study on Deformation and Fracture of Solid”, p. 11, Japan Soc. Material Science, 1968.Google Scholar
Michalak, J. T. and Schoone, R. D., “Recrystallization and Texture Development in a Low Carbon, Aluminum-Killed Steel”, Trans. Met. Soc. AIME, 242 (1968), 1149.Google Scholar
Aoki, K., Hayami, S. and Matsuo, M., “Improvement of Accuracy in Representation of Conventional Pole Figures”, in Newkirk, J. B. and Mallett, G. R., Editors, Advances in X- ray Analysis, Vol. 10, p. 342, 1967.Google Scholar
Sunge, H. J., “Zur Darstellung allgemeiner Texturen”, Z. Met., 56 (1965), 872.Google Scholar
Roe, R. J., “Description of Crystallite Orientation in Polycrystalline Materials III. General solution to Pole Figure Inversion”, J. Appl. Phys., 36 (1965), 2024.Google Scholar
Morris, P. R. and Heckler, A. J., “Crystallite Orientation Analysis for Cubic Materials”, in Newkirk, J. B., Mallett, G. R., and Pfeiffer, H. G., Editors, Advances in X- ray Analysis, Vol. 11, p. 454, 1968.Google Scholar
Matsuo, M., Hayami, S. and Nagashima, S., “Formation Mechanisms of Annealing Textures in Low Carbon Steel Sheets”, to be presented in the International Conference on the Science and Technology of Iron and Steel, Tokyo, 1970.Google Scholar
Stibitz, G. R., “Energy and Lattice Spacing in Strained Solids”, Phys. Rev., 52 (1937), 619.Google Scholar
McKeehan, M. and Warren, B. E., “X- ray Study of Cold-Work in Thoriated Tungsten”, J. Appl. Phys., 24 (1953), 52.Google Scholar
Kobe, D. H., “Correction and Interpretation of Fourier Coefficients of X- ray Diffraction Patterns from Very Small, Distorted Crystals”, Acta Cryst., 13 (1960), 767.Google Scholar
Kagan, A. S. and Snovidov, V. M., “Analysis of the Shape of X- ray Diffraction Lines by the Method of Moments”, Soviet Physics- Technical Physics, 9 (1964), 579.Google Scholar
Harrison, J. W., “The Use of Strain Moments in Determining Strain Distributions in Deformed Crystals”, Acta Cryst., 20 (1966), 390.Google Scholar
Mitra, G. B., “X- ray Diffraction Profiles from Deformed Metals”, Brit. J. Appl. Phys., 16 (1965), 77.Google Scholar
Warren, B. E. and Averbach, B. L., “The Effect of Cold-Work Distortion on X- ray Patterns”, J. Appl. Phys., 21 (1950), 595.Google Scholar
Gokyu, I. and Matsuo, M., “Rolling and Recrystallization Textures of Silicon Iron Crystals with {110} <001> Orientation”, J. Japan Inst. Metals, 29 (1967), 374.+Orientation”,+J.+Japan+Inst.+Metals,+29+(1967),+374.>Google Scholar
van Arkel, A. E. and Burgers, W. G., “Verbreiteming der Debye- Scherrerschen Linien von kaltbearbeitetem Wolframdrabt und Wolframband als Funktion der Glühtemperatur und Glühdauer”, z. Phys., 48 (1928), 690.Google Scholar