Hostname: page-component-8448b6f56d-qsmjn Total loading time: 0 Render date: 2024-04-24T02:27:48.603Z Has data issue: false hasContentIssue false
  • English
  • Français

Determination of Argon in RF Sputtered SiO2 by X-Ray Emission

Published online by Cambridge University Press:  06 March 2019

J. Charles Lloyd
J. Charles Lloyd*
Affiliation:
IBM Components Division East Fishkill Facility, Hopewell Junction, N. Y. 12533
Get access

Abstract

Argon is commonly used as the sputtering medium for RF sputtering of insulators and is entrapped in the deposits. X-ray emission determination of argon in RF sputtered SiO2 was required as part of a study of the relationships between argon concentration in the deposits and their electrical and physical properties.

Concentrations ranging from 0.05 to 7.4 weight % argon were measured in deposits 0.5 to 5μ thick. Two techniques were used for standardization: (1) weight loss of deposits heated for several hours in a helium atmosphere at 600°C; (2) potassium Kα and chlorine Kα measurements on a KCl film of known thickness to infer argon mass/argon Kα net counts. Calibrations made using these procedures agreed to within 10% and are reliable to about ±25% on an absolute basis. Absorption of radiation by the deposits was taken into account and used to correct measured argon intensities for absorption.

Sputtering parameters which had major effects on argon concentration were the substrate temperature and the magnetic field applied during sputtering. Argon pressure and RF power were found to have lesser effects.

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 12: Seventeenth Annual Conference on Applications of X-ray Analysis, August 21-23, 1968 , 1968 , pp. 601 - 611
Copyright
Copyright © International Centre for Diffraction Data 1968

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Davidse, P.D. and Maissel, L.I., “Dielectric Thin Films through RF Sputtering”, JAP 37 : 574–579, 1966.Google Scholar
2. Hoffmeister, W. and Zugel, M. A., “Thin Solid Films” (to be published).Google Scholar
3. Schwartz, G.C., and Jones, R.E., “Argon Content of SiO2 Films Deposited by RF Sputtering in Argon”, IBM Report (to be published).Google Scholar
4. Birks, L.S., “X-ray Spectrochemical Analysis”, Interscience Pub., New York : 58–60, 1959.Google Scholar
5.“Table of X-ray Mass Absorption Coefficients”, Norelco Reporter, May-June, 1962.Google Scholar