Hostname: page-component-84b7d79bbc-fnpn6 Total loading time: 0 Render date: 2024-07-28T10:10:33.714Z Has data issue: false hasContentIssue false
  • English
  • Français

A Radioisotope On-Stream Analyzer for the Mining Industry

Published online by Cambridge University Press:  06 March 2019

M. Hifetala  and
J. Viitanen
M. Hifetala
Affiliation:
Outokumpu Oy, Institute of Physics, 02200 Espoo 20, Finland
J. Viitanen
Affiliation:
Outokumpu Oy, Technical Export Division, 02200 Espoo 20, Finland
Get access

Abstract

A distributed on-line analyzing system has been developed for automatic multielemental analysis of mineral slurries and solutions. The elements to be measured should be heavier than potassium. The system consists of measuring probes, a communication loop and a minicomputer with its peripherals. The measuring probe may either be directly immersed into the process stream or it is used with a sample cell in a by-line stream. Measuring probes are located at separate positions in the process. The measurement is based on X-ray fluorescence radiation which is excited with a sealed radioisotope source. The radiation is detected with a sealed high resolution proportional counter without filters. Spectrum stripping is based on reference samples which are measured in a computer controlled sequence in the same geometry as the sample. Thus possible instabilities in gain and resolution are under control. Chemical assays and slurry density are calculated from fluorescence and backscatter intensities. The minicomputer also controls the probes in the system and gives reports.

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 21: Twenty-Sixth Annual Conference on Applications of X-ray Analysis, August 3-5, 1977 , 1977 , pp. 193 - 205
Copyright
Copyright © International Centre for Diffraction Data 1977

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Watt, J.S., “Nuclear Techniques for On-Line Measurement in the Control of Mineral Processing,” IAEA International Symposium on Nuclear Techniques in Exploration, Extraction and Processing of Mineral Resources, IAEA-SM-216/103 (1977).Google Scholar
2. Leppälä, A., Koskinen, J., Leskinen, T. and Vanninen, P., “Courier 300 On-Stream Analysis System,” Trans, of SME 250 (1971) .Google Scholar
3. Rautala, P., “On-Line Instrumentation,” 2nd IFAC Symposium on Automation, in Mining, Mineral and Metal Processing, p. 3 (1976).Google Scholar
4. Sipilä, H., “The Principles of Energy Dispersive X-Ray Spectrometry Using the Proportional Counter,” Acta Polytechnica Scandinavica, Applied Physics Series, No. 116 (1976).Google Scholar
5. Sipilä, H.. and Kiuru, E., “On Energy Dispersive Properties of the Proportional Counter Channel,” Advances in X-Ray Analysis, Vol. 20, p. 555–563, Plenum Press (1977).Google Scholar
6. Uusitalo, S., “The Deconvolution of Proportional Counter Results in an X-Ray Fluorescence Analyzer,” Licentiate of Technology Thesis, University of Technology, Espoo, Finland (1976) (in Finnish).Google Scholar
7. Lehto, J., “A Computer Controlled Process Analyzer System,” Tutkimus ja tekniikka 5, p. 36–43 (1976)(in Finnish).Google Scholar
8. Lundán, A., Tar vain en, M. and Mattila, O., “Experiences in Applying Computers for On-Stream X-Ray Analyzing and Development of Automation in Mineral Flotation Process,” 15th APCOM Symposium, Brisbane, Australia (1977).Google Scholar
9. Rhodes, J.R., “Design and Application of X-Ray Emission Analyses Using Radioisotope X-Ray or Gamma Ray Sources,” ASTM Special Publication 485, pp. 243–284, Amer . Soc. for Testing and Materials (1971).Google Scholar