![](https://assets.cambridge.org/97805218/80695/cover/9780521880695.jpg)
Book contents
- Frontmatter
- Contents
- Acknowledgments
- 1 Introduction
- 2 Background and context
- I Network monitoring and management
- II Network design and traffic engineering
- III From bits to services
- Appendix A How to link original and measured flow characteristics when packet sampling is used: bytes, packets and flows
- Appendix B Application-specific payload bit strings
- Appendix C BLINC implementation details
- Appendix D Validation of direction-conforming rule
- References
- Index
Appendix B - Application-specific payload bit strings
Published online by Cambridge University Press: 05 September 2012
- Frontmatter
- Contents
- Acknowledgments
- 1 Introduction
- 2 Background and context
- I Network monitoring and management
- II Network design and traffic engineering
- III From bits to services
- Appendix A How to link original and measured flow characteristics when packet sampling is used: bytes, packets and flows
- Appendix B Application-specific payload bit strings
- Appendix C BLINC implementation details
- Appendix D Validation of direction-conforming rule
- References
- Index
Summary
This appendix lists the payload bit-strings used by a payload classifier.
Numbers in parentheses denote the beginning byte in the payload where each string is found. If there is no number the string is found at the beginning of the payload. Note that: “plen” denotes the size of the payload; \x denotes hex; && denotes AND; ∥ denotes OR; plen - 2 = (1) denotes that the payload length minus 2 is given by the first byte in the payload
- Type
- Chapter
- Information
- Design, Measurement and Management of Large-Scale IP NetworksBridging the Gap Between Theory and Practice, pp. 371 - 374Publisher: Cambridge University PressPrint publication year: 2008