The new mineral alumolukrahnite (IMA2022–059), CaCu2+Al(AsO4)2(OH)(H2O), was found at the Jote mine, Copiapó Province, Chile, where it is a secondary alteration phase associated with conichalcite, coronadite, gypsum, olivenite, pharmacosiderite, rruffite and scorodite. Alumolukrahnite occurs as crude diamond-shaped tablets up to ~0.1 mm, intergrown in crude spherical aggregates. Crystals are apple green and transparent to translucent, with vitreous lustre and a white streak. The Mohs hardness is 3½. The mineral is brittle with irregular fracture and no cleavage. The calculated density is 4.094 g cm–3. Optically, alumolukrahnite is biaxial (+) with α = 1.73(1), β = 1.74(1) and γ = 1.76(1) (white light). The empirical formula, determined from electron microprobe analyses, is Ca1.01(Cu0.92Zn0.13)Σ1.05(Al0.96Fe0.01)Σ0.97(As0.985O4)2(OH)0.88(H2O)1.12. Alumolukrahnite is triclinic, P$\bar{1}$, a = 5.343(5), b = 5.501(5), c = 7.329(5) Å, α = 67.72(2), β = 69.06(2), γ = 69.42(2)°, V = 180.3(3) Å3 and Z = 1. Alumolukrahnite is a member of the tsumcorite group and is the Al analogue of lukrahnite.

The new mineral tombstoneite (IMA2021-053), (Ca0.5Pb0.5)Pb3Cu2+6Te6+2O6(Te4+O3)6(Se4+O3)2(SO4)2⋅3H2O, occurs at the Grand Central mine in the Tombstone district, Cochise County, Arizona, USA, in cavities in quartz matrix in association with jarosite and rodalquilarite. Tombstoneite crystals are green pseudohexagonal tablets, up to 100 μm across and 20 μm thick. The mineral has a pale green streak and adamantine lustre. It is brittle with irregular fracture and a Mohs hardness of ~2½. It has one perfect cleavage on {001}. The calculated density is 5.680 g cm–3. Optically, the mineral is uniaxial (–) and exhibits pleochroism: O = green, E = light yellow green; O > E. The Raman spectrum exhibits bands consistent with Te6+O6, Te4+O3, Se4+O3 and SO4. Electron microprobe analysis provided the empirical formula (Ca0.51Pb0.49)Σ1.00Pb3.00Cu2+5.85Te6+2.00O6(Te4+1.00O3)6(Se4+0.69Te4+0.24S0.07O3)2(S1.00O4)2⋅3H2O. Tombstoneite is trigonal, P321, a = 9.1377(9), c = 12.2797(9) Å, V = 887.96(18) Å3 and Z = 1. The structure of tombstoneite (R1 = 0.0432 for 1205 I > 2σI) contains thick heteropolyhedral layers comprising Te6+O6 octahedra, Jahn-Teller distorted Cu2+O5 pyramids, Te4+O3 pyramids and Se4+O3 pyramids. Pb2+ cations without stereoactive 6s2 lone-pair electrons are hosted in pockets in the heteropolyhedral layer. Pb2+ cations, possibly with stereoactive 6s2 lone-pair electrons, are located in the interlayer region along with SO4 tetrahedra and H2O groups. Within the heteropolyhedral layer, the Te6+O6 octahedra and the Te4+O3 pyramids form finite Te6+O3(Te4+O3)3 clusters with a pinwheel-like configuration. This is the first known finite complex including both Te4+ and Te6+ polyhedra in any natural or synthetic tellurium oxysalt structure.

The new mineral flaggite (IMA2021-044), Pb4Cu2+4Te6+2(SO4)2O11(OH)2(H2O), occurs at the Grand Central mine in the Tombstone district, Cochise County, Arizona, USA, in cavities in quartz matrix in association with alunite, backite, cerussite, jarosite and rodalquilarite. Flaggite crystals are lime-green to yellow-green tablets, up to 0.5 mm across. The mineral has a very pale green streak and adamantine lustre. It is brittle with irregular fracture and a Mohs hardness of ~3. It has one excellent cleavage on {010}. The calculated density is 6.137 g cm–3. Optically, the mineral is biaxial (+) with α = 1.95(1), β = 1.96(1), γ = 2.00(1) (white light); 2V = 54(2)°; pleochroism: X green, Y light yellow green, Z nearly colourless; X > Y > Z. The Raman spectrum exhibits bands consistent with TeO6 and SO4. Electron microprobe analysis provided the empirical formula Pb3.88Cu2+3.89Te6+2.08(SO4)2O11(OH)2(H2O) (–0.03 H). Flaggite is triclinic, P1, a = 9.5610(2), b = 9.9755(2), c = 10.4449(3) Å, α = 74.884(1), β = 89.994(1), γ = 78.219(1)°, V = 939.97(4) Å3 and Z = 2. The structure of flaggite (R1 = 0.0342 for 5936 I > 2σI) contains hexagonal-close-packed, stair-step-like layers comprising TeO6 octahedra and Jahn-Teller distorted CuO6 octahedra. The layers in the structure of flaggite are very similar to those in bairdite, timroseite and paratimroseite.

A chloroacetamide herbicide by application timing factorial experiment was conducted in 2017 and 2018 in Mississippi to investigate chloroacetamide use in a dicamba-based Palmer amaranth management program in cotton production. Herbicides used were S-metolachlor or acetochlor, and application timings were preemergence, preemergence followed by (fb) early postemergence, preemergence fb late postemergence, early postemergence alone, late postemergence alone, and early postemergence fb late postemergence. Dicamba was included in all preemergence applications, and dicamba plus glyphosate was included with all postemergence applications. Differences in cotton and weed response due to chloroacetamide type were minimal, and cotton injury at 14 d after late postemergence application was less than 10% for all application timings. Late-season weed control was reduced up to 30% and 53% if chloroacetamide application occurred preemergence or late postemergence only, respectively. Late-season weed densities were minimized if multiple applications were used instead of a single application. Cotton height was reduced by up to 23% if a single application was made late postemergence relative to other application timings. Chloroacetamide application at any timing except preemergence alone minimized late-season weed biomass. Yield was maximized by any treatment involving multiple applications or early postemergence alone, whereas applications preemergence or late postemergence alone resulted in up to 56% and 27% yield losses, respectively. While no yield loss was reported by delaying the first of sequential applications until early postemergence, forgoing a preemergence application is not advisable given the multiple factors that may delay timely postemergence applications such as inclement weather.

Native tungsten (IMA2011-004), W, is officially described as a new mineral from gold placers in the Bol'shaya Pol'ya river valley, Prepolar Urals, Russia, associated with yttriaite-(Y) and from quartz veins in the Mt Neroyka rock-crystal field, Ust–Puiva, Tyumenskaya Oblast', Russia. Tungsten forms polycrystalline grains and masses, and rarely cubo-octahedra. It is silver white to steel grey in colour, with metallic lustre and grey streak. The calculated density is 19.226 g/cm3. The Vickers hardness (VHN25) is 571.45 kg/mm2. In plane polarised light, tungsten is white with a pale-yellow tint and optically isotropic. Electron microprobe analyses of Bol'shaya Pol'ya river valley material provided W 99.27, Mo 0.06, Mn 0.04, Fe 0.01, total 99.38 wt.%. The five strongest powder X-ray diffraction lines are [dobs Å(I)(hkl)]: 2.2422(100)(110), 1.5835(25)(200), 1.2929(48)(211), 1.0010(23)(310) and 0.8457(24)(321). Tungsten is cubic, Im$\bar{3}$m, a = 3.1648(4) Å, V = 31.69(4) Å3 and Z = 2. Some additional occurrences of native tungsten and technogenic tungsten found in Nature are also described.

Galeaclolusite, [Al6(AsO4)3(OH)9(H2O)4]⋅8H2O, is a new secondary hydrated aluminium arsenate mineral from Cap Garonne, Var, France. It forms crusts and spheroids of white fibres up to 50 μm long by 0.4 μm wide and only 0.1 μm thick. The fibres are elongated along [001] and flattened on (100). The calculated density is 2.27 g⋅cm–3. Optically, galeaclolusite is biaxial with α = 1.550(5), β not determined, γ = 1.570(5) (white light) and partial orientation: Z = c (fibre axis). Electron microprobe analyses coupled with crystal structure refinement results gives an empirical formula based on 33 O atoms of Al5.72Si0.08As2.88O33H34.12. Galeaclolusite is orthorhombic, Pnma, with a = 19.855(4), b = 17.6933(11), c = 7.7799(5) Å, V = 2733.0(7) Å3 and Z = 4. The crystal structure of galeaclolusite was established from its close relationship to bulachite and refined using synchrotron powder X-ray diffraction data. It is based on heteropolyhedral layers, parallel to (100), of composition Al6(AsO4)3(OH)9(H2O)4 and with H-bonded H2O between the layers. The layers contain [001] spiral chains of edge-shared octahedra, decorated with corner-connected AsO4 tetrahedra, that are the same as in the mineral liskeardite.

Hagstromite, Pb8Cu2+(Te6+O6)2(CO3)Cl4, (IMA2019-093) is a new tellurate mineral from Otto Mountain near Baker, California, USA. It occurs on quartz in association with cerussite, fuettererite and thorneite. It is a secondary oxidation zone mineral and is presumed to have formed by oxidation of earlier formed tellurides, chalcopyrite and galena. Hagstromite occurs as light yellow–green blades, up to ~100 μm long. Crystals are transparent with adamantine to silky lustre. The mineral is brittle with two cleavages providing splintery fracture; the Mohs hardness is probably between 2 and 3. The calculated density is 7.062 g cm–3. Hagstromite is optically biaxial (+), with calculated indices of refraction for α = 2.045, β = 2.066 and γ = 2.102; 2Vmeas = 76(1)°; and optical orientation X = b, Y = a and Z = c. The Raman spectrum of hagstromite exhibits similarities with those of agaite and thorneite and confirms the presence of CO32–. The electron microprobe analyses provided the empirical formula Pb8.07Cu2+0.98Te6+1.96C1.17Cl3.83O15.34. Hagstromite is orthorhombic, space group Ibam, with a = 23.688(17), b = 9.026(8), c = 10.461(8) Å, V = 2237(3) Å3 and Z = 4. The crystal structure of hagstromite (R1 = 0.0659 for 284 I > 2σI reflections) contains a novel Cu2+Te6+2O12 chain assembled of corner-sharing Cu2+O4 squares and Te6+O6 octahedra. The O atoms in the chains form bonds with Pb2+ cations, which in turn bond to Cl– and CO32– anions, thereby creating a framework structure.

Cuyaite (IMA2019-126), Ca2Mn3+As3+14O24Cl, is a new arsenite mineral from near Cuya in the Camarones Valley, Arica Province, Chile. It is associated with anhydrite, native arsenic, arsenolite, calcite, claudetite, ferrinatrite, gajardoite-3R, leiteite, magnesiocopiapite, phosphosiderite, pyrite, realgar and talmessite and formed from the oxidation of As-bearing primary phases and alteration by saline fluids derived from evaporating meteoric water under hyperarid conditions. Cuyaite occurs as pale brown thin needles (elongated on [010]), typically in divergent sprays and subparallel intergrowths. The streak is white. Crystals are transparent with adamantine lustre; subparallel intergrowths exhibit silky lustre. The mineral has Mohs hardness of 2½, is brittle, exhibits no cleavage and has irregular fracture. The calculated density is 4.140 g cm–3. Cuyaite is optically biaxial (–), with α = 1.87(1), β = 1.956(calc) and γ = 1.98(1), determined in white light; 2Vmeas = 60(1)°; and orientation: X = b and Y ^ a = 53° in obtuse β. Electron microprobe analyses provided the empirical formula Ca2.03Mn3+0.95(As3+13.66Sb3+0.65)Σ14.31O24Cl0.88. The six strongest powder X-ray diffraction lines are [dobs Å(I)(hkl)]: 4.73(45)(111, $\bar{1}$12), 3.162(100)($\bar{3}$14), 3.035(28)(213), 3.004(37)(204), 2.931(90)($\bar{2}$15, 312) and 2.779(28)(020). Cuyaite is monoclinic, Pn, a = 14.7231(6), b = 5.58709(19), c = 17.4185(12) Å, β = 112.451(8)°, V = 1324.23(14) Å3 and Z = 2. In the crystal structure of cuyaite (R1 = 0.0369 for 2095 I > 2σI reflections), AsO3 pyramids share O corners to form a ‘loose’ 3D framework; Jahn–Teller distorted Mn3+O6 octahedra and CaO8 polyhedra link by edges and corners to form columns; the columns also link by edge- and corner-sharing to the AsO3 pyramids in the framework; Cl occupies channels along [010] in the framework. The Raman spectrum is consistent with the presence of multiple As3+O3 groups.

Acifluorfen is a nonsystemic PPO-inhibiting herbicide commonly used for POST Palmer amaranth control in soybean, peanut, and rice across the southern United States. Concerns have been raised regarding herbicide selection pressure and particle drift, increasing the need for application practices that optimize herbicide efficacy while mitigating spray drift. Field research was conducted in 2016, 2017, and 2018 in Mississippi and Nebraska to evaluate the influence of a range of spray droplet sizes [150 μm (Fine) to 900 μm (Ultra Coarse)], using acifluorfen to create a novel Palmer amaranth management recommendation using pulse width modulation (PWM) technology. A pooled site-year generalized additive model (GAM) analysis suggested that 150-μm (Fine) droplets should be used to obtain the greatest Palmer amaranth control and dry biomass reduction. Nevertheless, GAM models indicated that only 7.2% of the variability observed in Palmer amaranth control was due to differences in spray droplet size. Therefore, location-specific GAM analyses were performed to account for geographical differences to increase the accuracy of prediction models. GAM models suggested that 250-μm (Medium) droplets optimize acifluorfen efficacy on Palmer amaranth in Dundee, MS, and 310-μm (Medium) droplets could sustain 90% of maximum weed control. Specific models for Beaver City, NE, indicated that 150-μm (Fine) droplets provide maximum Palmer amaranth control, and 340-μm (Medium) droplets could maintain 90% of greatest weed control. For Robinsonville, MS, optimal Palmer amaranth control could be obtained with 370-μm (Coarse) droplets, and 90% maximum control could be sustained with 680 μm (Ultra Coarse) droplets. Differences in optimal droplet size across location could be a result of convoluted interactions between droplet size, weather conditions, population density, plant morphology, and soil fertility levels. Future research should adopt a holistic approach to identify and investigate the influence of environmental and application parameters to optimize droplet size recommendations.

Herbicide applications performed with pulse width modulation (PWM) sprayers to deliver specific spray droplet sizes could maintain product efficacy, minimize potential off-target movement, and increase flexibility in field operations. Given the continuous expansion of herbicide-resistant Palmer amaranth populations across the southern and midwestern United States, efficacious and cost-effective means of application are needed to maximize Palmer amaranth control. Experiments were conducted in two locations in Mississippi (2016, 2017, and 2018) and one location in Nebraska (2016 and 2017) for a total of 7 site-years. The objective of this study was to evaluate the influence of a range of spray droplet sizes [150 (Fine) to 900 μm (Ultra Coarse)] on lactofen and acifluorfen efficacy for Palmer amaranth control. The results of this research indicated that spray droplet size did not influence lactofen efficacy on Palmer amaranth. Palmer amaranth control and percent dry-biomass reduction remained consistent with lactofen applied within the aforementioned droplet size range. Therefore, larger spray droplets should be used as part of a drift mitigation approach. In contrast, acifluorfen application with 300-μm (Medium) spray droplets provided the greatest Palmer amaranth control. Although percent biomass reduction was numerically greater with 300-μm (Medium) droplets, results did not differ with respect to spray droplet size, possibly as a result of initial plant injury, causing weight loss, followed by regrowth. Overall, 900-μm (Ultra Coarse) droplets could be used effectively without compromising lactofen efficacy on Palmer amaranth, and 300-μm (Medium) droplets should be used to achieve maximum Palmer amaranth control with acifluorfen.

The mineral ‘oboyerite’, first described in 1979 from the Grand Central mine, Tombstone, Cochise County, Arizona, USA, has been re-examined. The type specimen from the Natural History Museum, London and a specimen from the Natural History Museum of Los Angeles County (traceable to S. A Williams, who first described ‘oboyerite’) were analysed in this study. The discreditation of ‘oboyerite’ as a valid mineral species has been approved by the Commission on New Minerals, Nomenclature and Classification of the International Mineralogical Association (Proposal 19-D). Single-crystal X-ray diffraction, powder X-ray diffraction, electron probe microanalysis and scanning electron microscopy were all employed to show that ‘oboyerite’ is formed of at least two distinct phases, including the lead–tellurium oxysalt minerals ottoite and plumbotellurite. During the course of the discreditation, plumbotellurite was confirmed to be identical to the synthetic compound α-Pb2+Te4+O3. Previously, in some mineralogical literature plumbotellurite was described as orthorhombic with no known crystal structure.

Recent commercialization of auxin herbicide–based weed control systems has led to increased off-target exposure of susceptible cotton cultivars to auxin herbicides. Off-target deposition of dilute concentrations of auxin herbicides can occur on cotton at any stage of growth. Field experiments were conducted at two locations in Mississippi from 2014 to 2016 to assess the response of cotton at various growth stages after exposure to a sublethal 2,4-D concentration of 8.3 g ae ha−1. Herbicide applications occurred weekly from 0 to 14 weeks after emergence (WAE). Cotton exposure to 2,4-D at 2 to 9 WAE resulted in up to 64% visible injury, whereas 2,4-D exposure 5 to 6 WAE resulted in machine-harvested yield reductions of 18% to 21%. Cotton maturity was delayed after exposure 2 to 10 WAE, and height was increased from exposure 6 to 9 WAE due to decreased fruit set after exposure. Total hand-harvested yield was reduced from 2,4-D exposure 3, 5 to 8, and 13 WAE. Growth stage at time of exposure influenced the distribution of yield by node and position. Yield on lower and inner fruiting sites generally decreased from exposure, and yield partitioned to vegetative or aborted positions and upper fruiting sites increased. Reductions in gin turnout, micronaire, fiber length, fiber-length uniformity, and fiber elongation were observed after exposure at certain growth stages, but the overall effects on fiber properties were small. These results indicate that cotton is most sensitive to low concentrations of 2,4-D during late vegetative and squaring growth stages.

The crystal structure of tlapallite has been determined using single-crystal X-ray diffraction and supported by electron probe micro-analysis, powder diffraction and Raman spectroscopy. Tlapallite is trigonal, space group P321, with a = 9.1219(17) Å, c = 11.9320(9) Å and V = 859.8(3) Å3, and was refined to R1 = 0.0296 for 786 reflections with I > 2σ(I). This study resulted from the discovery of well-crystallised tlapallite at the Wildcat prospect, Utah, USA. The chemical formula of tlapallite has been revised to (Ca,Pb)3CaCu6[Te4+3Te6+O12]2(Te4+O3)2(SO4)2·3H2O, or more simply (Ca,Pb)3CaCu6Te4+8Te6+2O30(SO4)2·3H2O, from H6(Ca,Pb)2(Cu,Zn)3(TeO3)4(TeO6)(SO4). The tlapallite structure consists of layers containing distorted Cu2+O6 octahedra, Te6+O6 octahedra and Te4+O4 disphenoids (which together form the new mixed-valence phyllotellurate anion [Te4+3Te6+O12]12−), Te4+O3 trigonal pyramids and CaO8 polyhedra. SO4 tetrahedra, Ca(H2O)3O6 polyhedra and H2O groups fill the space between the layers. Tlapallite is only the second naturally occurring compound containing tellurium in both the 4+ and 6+ oxidation states with a known crystal structure, the other being carlfriesite, CaTe4+2Te6+O8. Carlfriesite is the predominant secondary tellurium mineral at the Wildcat prospect. We also present an updated structure for carlfriesite, which has been refined to R1 = 0.0230 for 874 reflections with I > 2σ(I). This updated structural refinement improves upon the one reported previously by refining all atoms anisotropically and presenting models of bond valence and Te4+ secondary bonding.

The introduction of auxin herbicide weed control systems has led to increased occurrence of crop injury in susceptible soybeans and cotton. Off-target exposure to sublethal concentrations of dicamba can occur at varying growth stages, which may affect crop response. Field experiments were conducted in Mississippi in 2014, 2015, and 2016 to characterize cotton response to a sublethal concentration of dicamba equivalent to 1/16X the labeled rate. Weekly applications of dicamba at 35 g ae ha−1 were made to separate sets of replicated plots immediately following planting until 14 wk after emergence (WAE). Exposure to dicamba from 1 to 9 WAE resulted in up to 32% visible injury, and exposure from 7 to 10 WAE delayed crop maturity. Exposure from 8 to 10 and 13 WAE led to increased cotton height, while an 18% reduction in machine-harvested yield resulted from exposure at 6 WAE. Cotton exposure at 3 to 9 WAE reduced the seed cotton weight partitioned to position 1 fruiting sites, while exposure at 3 to 6 WAE also reduced yield in position 2 fruiting sites. Exposure at 2, 3, and 5 to 7 WAE increased the percent of yield partitioned to vegetative branches. An increase in percent of yield partitioned to plants with aborted terminals occurred following exposure from 3 to 7 WAE and corresponded with reciprocal decreases in yield partitioned to positional fruiting sites. Minimal effects were observed on fiber quality, except for decreases in fiber length uniformity resulting from exposure at 9 and 10 WAE.

Fungus-growing termites (Macrotermitinae) collect water to air-condition their fungi and have been recorded tunnelling deeper than 80 m for groundwater. This collection of water ultimately results in solute accumulation and nutrient enrichment of their termitaria. We consequently hypothesized that nutrient enrichment of termitaria constructed by fungus-growing termites would be greater than by non-fungus-growing termites. To test this, we compared nutrient enrichment of termitaria of fungus-growing Macrotermes spp. in Namibia and termitaria of two non-fungus-growing termites – Trinervitermes trinervoides in South Africa and Nasutitermes triodiae in Australia. Compared with adjacent topsoils, Macrotermes termitaria were significantly enriched in 18 elements whereas T. trinervoides and N. triodiae termitaria were enriched in only one and five elements, respectively. Nutrients particularly enriched in Macrotermites termitaria included Ca (an enrichment factor of 12), Mg (2.9), Co (2.8), Fe (2.4), Mn (2.3), Se (2.2) and Cu (2.0). We suggest that fungus-growing termites that collect water for air-conditioning their fungi have the potential to inadvertently boost – to a far greater degree than non-fungus-growing termites – the availability of nutrients to local plants and herbivores.

The crystal structure of burckhardite from the type locality, Moctezuma, Sonora, Mexico, has been refined to R1 = 0.0362 and wR2 = 0.0370 for 215 reflections with I > 2σ(I). Burckhardtite is trigonal, space group P1m, with the unit-cell parameters a = 5.2566(5) Å , c = 13.0221(10) Å , V = 311.62(5) Å3 and Z = 1 for the ideal formula unit Pb2(Fe3+Te6+)[AlSi3O8]O6. There is no long-range order of (Fe3+, Te6+) or (Al3+, Si4+). New microprobe data were used to estimate site scattering factors, and Raman spectroscopic data showed no evidence of O–H stretching bands. Burckhardtite is not closely related to the micas, as supposed previously, but is a double-sheet silicate in which the aluminosilicate anion resembles that of minerals such as cymrite and kampfite. The [(Fe3+Te6+)O6]3– part of the structure is not bonded directly to the aluminosilicate layer, but forms a discrete anionic phyllotellurate layer that alternates with the [AlSi3O8]– double sheets. Similar phyllotellurate layers are known from several synthetic phases. In burckhardtite, Pb2+ cations intercalate between phyllosilicate and phyllotellurate layers, forming a Pb2[FeTeO6] module that is topologically similar to a slab of the structure of rosiaite, Pb[Sb2O6]. The crystal symmetry, structure, classification as a double-sheet silicate and chemical formula, including the determination of the 6+ valence of Te and absence of essential H2O, are all new findings for the mineral.

Tapiaite (IMA2014-024), Ca5Al2(AsO4)4(OH)4·12H2O, is a new mineral from the Jote mine, Tierra Amarilla, Copiapó Province, Atacama, Chile. The mineral is a late-stage, low-temperature, secondary mineral occurring with conichalcite, joteite, mansfieldite, pharmacoalumite, pharmacosiderite and scorodite in narrow seams and vughs in the oxidized upper portion of a hydrothermal sulfide vein hosted by volcanoclastic rocks. Crystals occur as colourless blades, flattened on {101} and elongated and striated along [010], up to ∼0.5 mm long, and exhibiting the forms {101}, {101} and {111}. The blades are commonly intergrown in subparallel bundles and less commonly in sprays. The mineral is transparent and has a white streak and vitreous lustre. The Mohs hardness is estimated to be between 2 and 3, the tenacity is brittle, and the fracture is splintery. It has two perfect cleavages on {101} and {101}. The calculated density based on the empirical formula is 2.681 g cm–3. It is optically biaxial (+) with α = 1.579(1), β = 1.588(1), γ = 1.610(1) (white light), 2Vmeas = 66(2)° and 2Vcalc = 66°. The mineral exhibits no dispersion. The optical orientation is X ≈ [101]; Y = b, Z ≈ [101]. The electron-microprobe analyses (average of five) provided: Na2O 0.09, CaO 24.96, CuO 0.73, Al2O3 10.08, Fe2O3 0.19, As2O5 40.98, Sb2O5 0.09, H2 O 23.46 (structure), total 100.58 wt.%. In terms of the structure, the empirical formula (based on 32 O a.p.f.u.) is (Ca4.83Cu0.102+Na0.03)Σ4.96(Al2.14Fe0.033+)Σ2.17[(As3.875+Sb0.015+)Σ3.88O16][(OH)3.76(H2O)0.24]Σ4(H2O)10·2H2O. The mineral is easily soluble in RT dilute HCl. Tapiaite is monoclinic, P21/n, with unit-cell parameters a = 16.016(1), b = 5.7781(3), c = 16.341(1) Å, β = 116.704(8)°, V = 1350.9(2) Å3 and Z = 2. The eight strongest lines in the powder X-ray diffraction pattern are [dobs Å(I)(hkl)]: 13.91(100)(101), 7.23(17)(200,002), 5.39(22)(110,011), 4.64(33)(112,211,303), 3.952(42)(113,311,213), 3.290(35)(214,412,114,411), 2.823(39)(303,315) and 2.753(15)(513,115,121,511). The structure of tapiaite (R1 = 5.37% for 1733 Fo > 4σF) contains Al(AsO4)(OH)2 chains of octahedra and tetrahedra that are topologically identical to the chain in the structure of linarite. CaO8 polyhedra condense to the chains, forming columns, which are decorated with additional peripheral AsO4 tetrahedra. The CaO8 polyhedra in adjacent columns link to one another by corner-sharing to form thick layers parallel to {101} and the peripheral AsO4 tetrahedra link to CaO6 octahedra in the interlayer region, resulting in a framework structure.

An unusually diverse array of 25 secondary Te oxysalt minerals has been documented from Otto Mountain, California, and 18 of these from the Bird Nest drift sublocality. A paragenetic sequence for these minerals is proposed, using observed overgrowth relationships plus spatial association data and data from other localities. Apart from Te and O, the components Pb, Cu and H are essential in the majority of the minerals. The atomic Cu/Te ratio decreases through the paragenetic sequence. This, and the occurrence of minerals with additional components such as Cl–, CO32–, SO42– and Fe3+ at an intermediate stage, suggests nonmonotonic evolution of the parent fluids, reflecting differing access to or spatial distribution of various components. For the minerals with known crystal structures, two alternative 'structural units' were identified, one consisting only of the Te4+ or Te6+ oxyanion, while the other also included small, strongly-bound cations such as Cu2+. The degree of polymerization for the Te oxyanion correlated with the paragenetic sequence: the monomeric tellurate anions of early minerals were replaced progressively by dimers, chains and sheet structures, which may relate to a decreasing abundance of the 'network modifying' Cu2+ cation, analogous to Bowen's discontinuous reaction series in igneous rock-forming silicates. No relationship was seen between paragenetic order and the larger type of structural unit, or structural complexity as defined by information content. This contrasts with results in the literature for evaporite sulfates and pegmatite phosphates. While structure–paragenesis relationships may be widespread, the exact nature of such relationships may be different for different chemical systems and different paragenetic environments.

Girdite, a mineral described byWilliams in 1979 from the Grand Central mine, Tombstone, Cochise County, Arizona, USA, has been re-examined by powder X-ray diffraction, single-crystal X-ray diffraction and electron microprobe. Type material from The Natural History Museum, London and the United States National Museum of Natural History (Smithsonian Institution) was examined. The original description of girdite is shown to have been based upon data obtained from at least two and possibly three different phases, one corresponding to ottoite and another probably corresponding to oboyerite, although the latter itself appears to be a mixture. The discreditation of girdite as a valid mineral species has been approved by the IMA-CNMNC, Proposal 16-G.

The new mineral currierite (IMA2016-030), Na4Ca3MgAl4(AsO3OH)12·9H2O, was found at the Torrecillas mine, Iquique Province, Chile, where it occurs as a secondary alteration phase in association with anhydrite, canutite, chudobaite, halite, lavendulan, magnesiokoritnigite, quartz, scorodite and torrecillasite. Currierite occurs as hexagonal prisms, needles and hair-like fibres up to ∼200 μm long, in sprays. The crystal forms are ﹛100﹜ and ﹛001﹜. Crystals are transparent, with vitreous to silky lustre and white streak. The Mohs hardness is ∼2, tenacity is brittle, but elastic in very thin fibres, and the fracture is irregular. Crystals exhibit at least one good cleavage parallel [001]. The measured density is 3.08(2) g cm -3 and the calculated density is 3.005 g cm -3. Optically, currierite is uniaxial (–) with ω= 1.614(1) and ε= 1.613(1) (measured in white light). The mineral is slowly soluble in dilute HCl at room temperature. The empirical formula, determined from electron-microprobe analyses, is (Na3.95A12.96Ca2.74Mg1.28Fe0.633+Cu0.13K0.08Co0.03Σ11.80 (AS11.685+Sb0.325+Σ12(O56.96Cl0.04)Σ57H30.81. Currierite is hexagonal, P622, with a = 12.2057(9), c = 9.2052(7) Å, V= 1187.7(2) Å3 and Z = 1. The eight strongest powder X-ray diffraction lines are [dobs Å(I)(hkl)]: 10.63(100)(100), 6.12(20)(110), 5.30(15)(200), 4.61(24)(002), 4.002(35)(210), 3.474(29)(202), 3.021(96)(212) and 1.5227(29)(440,334,612). The structure of currierite (R1 = 2.27% for 658 Fo > 4σF reflections) is based upon a heteropolyhedral chain along c in which AlO6 octahedra are triple-linked by sharing corners with AsO3OH tetrahedra. Chains are linked to one another by bonds to 8(4 + 4)-coordinated Na and 8-coordinated Ca forming a three-dimensional framework with large cavities that contain rotationally disordered Mg(H2O)6 octahedra. The chain in the structure of currierite is identical to that in kaatialaite and a geometrical isomer of that in ferrinatrite. The mineral is named in honour of Mr. Rock Henry Currier (1940–2015), American mineral dealer, collector, author and lecturer.