Selenocysteine biosynthesis and its cotranslational incorporation into selenoproteins are achieved by a complex molecular machinery (reviewed in Hüttenhofer & Böck, 1998). A major wheel in this mechanism is the tRNASec, which plays a pivotal role. It is first charged with serine by the conventional SerRS, the seryl-residue being further converted in situ to the selenocysteyl-residue by the selenocysteine synthase enzyme. The charged selenocysteyl-tRNASec delivers selenocysteine to the nascent polypeptide chain in response to a reprogrammed UGA codon. The classical elongation factors EF-Tu (in bacteria) or EF1-α (in eukaryotes) do not intervene at this stage. Instead, this process requires a selenocysteine-specific translation factor, called SELB in bacteria, but for which no eukaryotic homologue has been cloned yet. Interestingly, antideterminants against EF-Tu binding were found in the Escherichia coli tRNASec (Rudinger et al., 1996). Based on the several functions that this tRNA has to accomplish, it is reasonable to expect that the tRNASec secondary structure should exhibit distinctive structural features deviating from classical elongator tRNAs. In this regard, functional studies, structural probing, and sequence comparisons confirmed the earlier proposal that the bacterial tRNASec needs an 8-bp long amino acceptor stem and a 6-bp long D-stem to function, instead of the canonical 7 bp and 3/4 bp, respectively (Leinfelder et al., 1988; Baron et al., 1990, 1993; Tormay et al., 1994).

Histone RNA 3′ processing in vitro produces one or more 5′ cleavage products corresponding to the mature histone mRNA 3′ end, and a group of 3′ cleavage products whose 5′ ends are mostly located several nucleotides downstream of the mRNA 3′ end. The formation of these 3′ products is coupled to the formation of 5′ products and dependent on the U7 snRNP and a heat-labile processing factor. These short 3′ products therefore are a true and general feature of the processing reaction. Identical 3′ products are also formed from a model RNA containing all spacer nucleotides downstream of the mature mRNA 3′ end, but no sequences from the mature mRNA. Again, this reaction is dependent on both the U7 snRNP and a heat-labile factor. Unlike the processing with a full-length histone pre-mRNA, this reaction produces only 3′ but no 5′ fragments. In addition, product formation is inhibited by addition of cap structures at the model RNA 5′ end, indicating that product formation occurs by 5′-3′ exonucleolytic degradation. This degradation of a model 3′ product by a 5′-3′ exonuclease suggests a mechanism for the release of the U7 snRNP after processing by shortening the cut-off histone spacer sequences base paired to U7 RNA.

Many proteins with unusual structural properties are comprised of multiple repeating amino acid sequences and are often fractious to expression in recombinant systems. To facilitate recombinant production of such proteins for structural and engineering studies, we have produced circular messenger RNAs with infinite open reading frames. We show that a circular mRNA containing a simple green fluorescent protein (GFP) open reading frame can direct GFP expression in Escherichia coli. A circular mRNA with an infinite GFP open reading frame produces extremely long protein chains, proving that bacterial ribosomes can internally initiate and repeatedly transit a circular mRNA. Only the monomeric forms of GFP produced from circular mRNA are fluorescent. Analysis of the translation initiation region shows that multiple sequences contribute to maximal translation from circular mRNA. This technology provides a unique means of producing a very long repeating-sequence protein, and may open the way for development of proteinaceous materials with novel properties.

Dimethyl sulfate modification was used to probe for tertiary structural elements in the group II intron Pl.LSU/2 from the mitochondrial pre-ribosomal RNA of the brown alga Pylaiella littoralis. Modification of the lariat form of the intron under conditions that allow both native folding and conformational homogeneity is found to be generally consistent with secondary and tertiary structural features identified previously for group II ribozymes. A comparison of chemical probing at temperatures just below and above the first melting transition illustrates the cooperative unfolding of tertiary structure and identifies novel candidates for tertiary interactions in addition to defining elements of secondary structure. Substitution of the GAAA terminal loop of domain V is shown to be compatible with retention of conformational homogeneity (despite the loss of an important tertiary interaction), but produces a concise methylation footprint in domain I at the site previously shown to harbor the receptor for that loop. The analysis also identified two nucleotide positions in domain V with novel secondary and potential tertiary structural roles. The proposed refinement of domain V secondary structure is supported by an expanded comparative analysis of group II sequences and bears increased resemblance to U2:U6 snRNA pairing in the spliceosome.

We have developed a site-specific chemical modification technique to incorporate a photoreactive azidophenacyl (APA) group at designated internal positions along the RNA phosphodiester backbone. Using this technique, we have analyzed interactions of the 5′ splice site (5′SS) RNA within the spliceosome. Several crosslinked products can be detected within complex B using the derivatized 5′SS RNAs, including U6 snRNA, hPrp8p, and 114-, 90-, 70-, 54-, and 27-kDa proteins. The 5′SS RNAs derivatized at intron positions +4 to +8 crosslink to U6 snRNA, confirming the previously reported pairing interaction between these sequences. hPrp8p and p70 are crosslinked to the 5′SS RNA when the APA is placed within the 5′ exon. Finally, a set of unidentified proteins, including p114, p54, and p27, is detected with the 5′SS RNA derivatized at intron positions +4 to +8. Introduction of the bulky APA group near the 5′SS junction (positions −2 to +3) strongly interferes with complex B formation and thus no APA crosslinks are observed at these positions. Together with our earlier observation that hPrp8p crosslinks to the GU dinucleotide at the 5′ end of the intron, these results suggest that the inhibitory effect of APA results from steric hindrance of the hPrp8p:5′SS interaction. Unexpectedly, thio-modifications within the region of the 5′SS RNA that is involved in base pairing to U6 snRNA strongly stimulate complex B formation.

A turnip yellow mosaic virus RNA-dependent RNA polymerase activity was used to study the template requirements for in vitro minus strand synthesis, which is initiated specifically opposite the 3′-CCA that terminates the 3′-tRNA-like structure. A deletion survey confirmed earlier results suggesting the absence of minus strand promoter elements upstream of the pseudoknotted acceptor stem and 3′-terminus. Reiteration of this 27-nt domain provided two competing initiation sites. By varying the added downstream element, it was shown that the pseudoknotted domain could be functionally replaced by various simple stem/loops, although with some decrease in activity. The addition of varying numbers of consecutive -CCA- triplets to the 3′ end of the tRNA-like structure resulted in accurate initiation from each added triplet. A similar spectrum of initiations occurred with an unstructured RNA consisting of 12 consecutive -CCA- triplets and no additional viral sequence. Substitution mutations revealed no influence on minus strand synthesis of the identity of the nucleotide immediately upstream of a -CC- initiation site, but a preference for a purine immediately downstream. The introduction of secondary structure into the linear template showed that the usage of potential -CCR- initiation sites is influenced by nonspecific secondary structure. We conclude that specificity arises from the requirement that a -CCR- sequence be sterically accessible. This mechanism is only applicable to interactions that do not involve RNA unwinding during site selection, but may be used commonly in positive strand RNA virus replication and be applicable to other RNA–protein interactions.

The eukaryotic small nucleolar RNAs (snoRNAs) are involved in processing of pre-rRNA and modification of rRNA nucleotides. Some snoRNAs are derived from mono- or polycistronic transcription units, whereas others are encoded in introns of protein genes. The present study addresses the role of the RNA lariat-debranching enzyme (Dbr1p) in the synthesis and function of intronic snoRNAs in the yeast Saccharomyces cerevisiae. Intronic snoRNA production was determined to depend on Dbr1p. Accumulation of mature intronic snoRNAs is reduced in a dbr1 mutant; instead, intronic snoRNAs are “trapped” within host intron lariats. Interestingly, the extent of intronic snoRNA accumulation in the form of lariats in dbr1 cells varied among different intronic snoRNAs. Intronic snoRNAs encoded within shorter introns, such as U24 and snR38, accumulate more unprocessed lariat precursors than those encoded within longer introns, e.g., U18 and snR39. This correlation was corroborated by experiments conducted with model intron:U24 snoRNA constructs. These results support a splicing-dependent exonucleolytic pathway for the biosynthesis of intronic snoRNAs. Curiously, U24 in a lariat may be functional in directing methylation of ribosomal RNA.

hnRNP A1 regulates alternative splicing by antagonizing SR proteins. It consists of two closely related, tandem RNA-recognition motifs (RRMs), followed by a glycine-rich domain. Analysis of variant proteins with duplications, deletions, or swaps of the RRMs showed that although both RRMs are required for alternative splicing function, each RRM plays distinct roles, and their relative position is important. Surprisingly, RRM2 but not RRM1 could support this function when duplicated, despite their very similar structure. Specific RNA binding and annealing are not sufficient for hnRNP A1 alternative splicing function. These observations, together with phylogenetic and structural data, suggest that the two RRMs are quasi-symmetric but functionally nonequivalent modules that evolved as components of a single bipartite domain.

This is the first study in which the complex of a monoclonal autoantibody fragment and its target, stem loop II of U1 snRNA, was investigated with enzymatic and chemical probing. A phage display antibody library derived from bone marrow cells of an SLE patient was used for selection of scFvs specific for stem loop II. The scFv specificity was tested by RNA immunoprecipitation and nitrocellulose filter binding competition experiments. Immunofluorescence data and immunoprecipitation of U1 snRNPs containing U1A protein, pointed to an scFv binding site different from the U1A binding site. The scFv binding site on stem loop II was determined by footprinting experiments using RNase A, RNase V1, and hydroxyl radicals. The results show that the binding site covers three sequence elements on the RNA, one on the 5′ strand of the stem and two on the 3′ strand. Hypersensitivity of three loop nucleotides suggests a conformational change of the RNA upon antibody binding. A three-dimensional representation of stem loop II reveals a juxtapositioning of the three protected regions on one side of the helix, spanning approximately one helical turn. The location of the scFv binding site on stem loop II is in full agreement with the finding that both the U1A protein and the scFv are able to bind stem loop II simultaneously. As a consequence, this recombinant monoclonal anti-U1 snRNA scFv might be very useful in studies on U1 snRNPs and its involvement in cellular processes like splicing.

A significant fraction of the bases in a folded, structured RNA molecule participate in noncanonical base pairing interactions, often in the context of internal loops or multi-helix junction loops. The appearance of each new high-resolution RNA structure provides welcome data to guide efforts to understand and predict RNA 3D structure, especially when the RNA in question is a functionally conserved molecule. The recent publication of the crystal structure of the “Loop E” region of bacterial 5S ribosomal RNA is such an event [Correll CC, Freeborn B, Moore PB, Steitz TA, 1997, Cell 91:705–712]. In addition to providing more examples of already established noncanonical base pairs, such as purine–purine sheared pairings, trans-Hoogsteen UA, and GU wobble pairs, the structure provides the first high-resolution views of two new purine–purine pairings and a new GU pairing. The goal of the present analysis is to expand the capabilities of both chemical probing and phylogenetic analysis to predict with greater accuracy the structures of RNA molecules. First, in light of existing chemical probing data, we investigate what lessons could be learned regarding the interpretation of this widely used method of RNA structure probing. Then we analyze the 3D structure with reference to molecular phylogeny data (assuming conservation of function) to discover what alternative base pairings are geometrically compatible with the structure. The comparisons between previous modeling efforts and crystal structures show that the intricate involvements of ions and water molecules in the maintenance of non-Watson–Crick pairs render the process of correctly identifying the interacting sites in such pairs treacherous, except in cases of trans-Hoogsteen A/U or sheared A/G pairs for the adenine N1 site. The phylogenetic analysis identifies A/A, A/C, A/U and C/A, C/C, and C/U pairings isosteric with sheared A/G, as well as A/A and A/C pairings isosteric with both G/U and G/G bifurcated pairings. Thus, each non-Watson–Crick pair could be characterized by a phylogenetic signature of variations between isosteric-like pairings. In addition to the conservative changes, which form a dictionary of pairings isosterically compatible with those observed in the crystal structure, concerted changes involving several base pairs also occur. The latter covariations may indicate transitions between related but distinctive motifs within the loop E of 5S ribosomal RNA.

The protection patterns of 5S rRNA in solution, within the ribosomal 50S subunit, 70S ribosomes, and functional complexes, were assessed with the phosphorothioate method. About 20% of the analyzed positions (G9–G107) showed strong assembly defects: A phosphorothioate at one of these positions significantly impaired the incorporation of 5S rRNA into 50S particles. The reverse has also been observed: A phosphorothioate is preferred over a phosphate residue in the assembly process at a few positions. The results further demonstrate that 5S rRNA undergoes conformational changes during the assembly in the central protuberance of the 50S subunit and upon association with the small ribosomal subunit forming a 70S ribosome. In striking contrast, when the 70S ribosomes are once formed, the contact pattern of the 5S rRNA is the same in various functional states such as initiation-like complexes and pre- and posttranslocational states.

Exchange of RNA structural domains through recombination can be used to engineer RNAs with novel functions and may have played an important role in the early evolution of life. The degree of function an RNA element retains upon recombination into a new sequence context is a measure of how deleterious or beneficial recombination will be. When we fused pairs of aptamers previously selected to bind coenzyme A, chloramphenicol, or adenosine, the chimerae retained some ability to bind both targets, but with reduced binding activity both in solution and on affinity resins, probably due to misfolding. Complex populations of recombined RNAs gave similar results. Applying dual selection pressure to recombined populations yielded the combinations that were best suited to binding both targets. Most reselected RNAs folded into the active conformation more readily than chimerae built from arbitrarily chosen aptamers, as indicated both by solution Kd measurements and affinity resin binding activity. Deletion/selection experiments confirmed that the sequences required for binding are fully contained within the respective domains and not derived from interaction between the domains, consistent with the modular architecture of their original design. The combinatorial nature of the recombination methods presented here takes advantage of the full sequence diversity of the starting populations and yields large numbers of bifunctional molecules (106 to more than 1012). The method can be easily generalized and should be applicable to engineering dual-function RNAs for a wide variety of applications, including catalysis, novel therapeutics, and studies of long-range RNA structure.