Hostname: page-component-7c8c6479df-p566r Total loading time: 0 Render date: 2024-03-29T06:09:26.630Z Has data issue: false hasContentIssue false

Nanomechanical measurements shed light on solid-state battery degradation

Published online by Cambridge University Press:  06 July 2020

Matthew T. McDowell*
Affiliation:
G.W. Woodruff School of Mechanical Engineering and School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, USA; mattmcdowell@gatech.edu

Extract

Lithium-ion batteries have enabled the widespread use of portable electronic devices and are propelling the growing electric vehicle market, but new battery technologies with improved performance are necessary for emerging applications such as electric aircraft. The solid-state battery is one such technology that could exhibit enhanced safety and higher energy density compared to conventional lithium-ion batteries. The use of a pure lithium metal anode within solid-state batteries is key for higher energy density (Figure 1a), and it is thought that using solid-state electrolytes instead of conventional liquids could increase the chemical and structural stability of lithium metal.1 Despite continued progress in the development of new inorganic solid-state electrolyte materials; however, a persistent problem has emerged: lithium metal tends to grow as filaments during charging instead of as a flat film, and these filaments can penetrate and fracture the stiff solid-state electrolyte to short circuit the cell (Figure 1b).2–4 To prevent this chemo-mechanical degradation process and enable filament-free charging, it is critical to understand the mechanical properties of lithium metal, which have been elusive because of the highly reactive nature of lithium.

Type
Opinion & Perspective
Copyright
Copyright © The Author(s), 2020, published on behalf of Materials Research Society by Cambridge University Press

Lithium-ion batteries have enabled the widespread use of portable electronic devices and are propelling the growing electric vehicle market, but new battery technologies with improved performance are necessary for emerging applications such as electric aircraft. The solid-state battery is one such technology that could exhibit enhanced safety and higher energy density compared to conventional lithium-ion batteries. The use of a pure lithium metal anode within solid-state batteries is key for higher energy density (Figure 1a), and it is thought that using solid-state electrolytes instead of conventional liquids could increase the chemical and structural stability of lithium metal.Reference Hatzell, Chen, Cobb, Dasgupta, Dixit, Marbella, McDowell, Mukherjee, Verma, Viswanathan, Westover and Zeier1 Despite continued progress in the development of new inorganic solid-state electrolyte materials; however, a persistent problem has emerged: lithium metal tends to grow as filaments during charging instead of as a flat film, and these filaments can penetrate and fracture the stiff solid-state electrolyte to short circuit the cell (Figure 1b).Reference Lewis, Tippens, Cortes and McDowell2Reference Cheng, Sharafi and Sakamoto4 To prevent this chemo-mechanical degradation process and enable filament-free charging, it is critical to understand the mechanical properties of lithium metal, which have been elusive because of the highly reactive nature of lithium.

Figure 1. Schematic of a solid-state battery (a) in the pristine state and (b) after charging causes lithium filaments to grow and induce fracture in the solid-state electrolyte because of stress σ at the crack tip.

Citrin et al. report an important advance in measuring the mechanical properties of nanoscale lithium filaments grown directly from solid-state batteries.Reference Citrin, Yang, Nieh, Berry, Gao, Pan, Srolovitz and Greer5 They find that the strength of lithium is strongly dependent on filament size, which could help explain why nanoscale lithium filaments can penetrate stiff inorganic electrolytes, causing solid-state batteries to fail.

Observations of fracture in solid-state electrolytes driven by lithium filament penetration have become commonplace in the development of solid-state batteries.Reference Kazyak, Garcia-Mendez, LePage, Sharafi, Davis, Sanchez, Chen, Haslam, Sakamoto and Dasgupta3,Reference Cheng, Sharafi and Sakamoto4 While the governing mechanisms are not entirely understood, recent work has suggested that lithium electrodeposition into flaws at the lithium/solid electrolyte interface could cause stress accumulation and crack growth.Reference Porz, Swamy, Sheldon, Rettenwander, Frömling, Thaman, Berendts, Uecker, Carter and Chiang6 Thus, understanding the size-dependent mechanical properties of lithium is a key piece of the puzzle, but this has proven challenging with conventional methods because of to the presence of surface contamination layers on lithium that can affect mechanical deformation. Experiments on bulk polycrystalline lithium under inert environments have shown sub-MPa yield stress and deformation that is largely governed by creep.Reference Masias, Felten, Garcia-Mendez, Wolfenstine and Sakamoto7,Reference LePage, Chen, Kazyak, Chen, Sanchez, Poli, Arruda, Thouless and Dasgupta8 Nanoindentation experiments probing much smaller micron-scale regions of films have shown significantly higher yield stresses than the bulk,Reference Herbert, Hackney, Thole, Dudney and Phani9 and recent in situ transmission electron microscopy (TEM) experiments on Li2CO3-coated lithium filaments also showed high yield stress.Reference Zhang, Yang, Du, Liu, Tang, Zhao, Wang, Chen, Sun, Jia, Li, Geng, Chen, Ye, Wang, Li, Sun, Li, Dai, Tang, Peng, Shen, Zhang, Zhu and Huang10 Although these studies have provided important information, it has remained a challenge to measure the properties of filaments with the size, structure, and surface properties found in actual solid-state batteries.

To overcome these issues, Citrin et al.Reference Citrin, Yang, Nieh, Berry, Gao, Pan, Srolovitz and Greer5 use a clever experimental setup to directly grow lithium filaments from a solid-state battery cell within a scanning electron microscope (SEM), followed by in situ nano-compression experiments in the same SEM. This enables the authors to visualize the nucleation and growth behavior of lithium particles and filaments, and then directly measure the mechanical properties of individual filaments. The lithium itself is likely of high purity and similar to that found in actual solid-state batteries. With these techniques, the authors find that small lithium filaments with diameters between ~300 and ~800 nm have more than an order of magnitude higher yield stress than bulk lithium, indicating that the deformation and flow behavior of lithium varies substantially with the size of the structure of interest.

This quantification of the strength of lithium filaments has important implications for the stability of solid-state batteries. Lithium metal must withstand relatively large stresses to drive crack growth in ceramic solid-state electrolytes, and the previously measured low yield stress of bulk lithium made it difficult to understand how such a material could drive crack propagation. This discrepancy could be explained if the small-scale lithium filaments are stronger than bulk lithium, as shown by Citrin et al.Reference Citrin, Yang, Nieh, Berry, Gao, Pan, Srolovitz and Greer5 Furthermore, short-circuit-induced failure only requires a single filament to propagate across the cell stack (Figure 1b), and the relatively wide distribution of yield stress values measured in this study suggests that the defect character within individual filaments could vary substantially, resulting in different mechanical behavior. This result indicates that certain filaments with particularly high strength are perhaps more prone to causing chemo-mechanical degradation.

Looking to the future, it is critical to understand how the interplay among defect character, filament size, and surface chemistry of lithium affects mechanical properties and deformation behavior. Furthermore, since the vast majority of solid-state electrolytes are chemically unstable in contact with lithium metal, the chemo-mechanical properties of interphase regions must also be measured,Reference Lewis, Tippens, Cortes and McDowell2 and their effect on crack propagation and lithium growth should be understood. Finally, while recent work has revealed important information about the dynamic processes by which lithium filaments drive crack growth,Reference Kazyak, Garcia-Mendez, LePage, Sharafi, Davis, Sanchez, Chen, Haslam, Sakamoto and Dasgupta3,Reference Porz, Swamy, Sheldon, Rettenwander, Frömling, Thaman, Berendts, Uecker, Carter and Chiang6 new in situ and operando imaging techniques need to be developed to probe these mechanisms at shorter length scales. With a comprehensive understanding of the size-dependent chemo-mechanical behavior of lithium, our community will make more rapid progress toward batteries that can power the next generation of electric vehicles and sustainable technologies.

References

Hatzell, K.B., Chen, X.C., Cobb, C.L., Dasgupta, N.P., Dixit, M.B., Marbella, L.E., McDowell, M.T., Mukherjee, P.P., Verma, A., Viswanathan, V., Westover, A.S., Zeier, W.G., ACS Energy Lett. 5 (3), 922 (2020).10.1021/acsenergylett.9b02668CrossRefGoogle Scholar
Lewis, J.A., Tippens, J., Cortes, F.J.Q., McDowell, M.T., Trends Chem. 1 (9), 845 (2019).Google Scholar
Kazyak, E., Garcia-Mendez, R., LePage, W.S., Sharafi, A., Davis, A.L., Sanchez, A.J., Chen, K.-H., Haslam, C., Sakamoto, J., Dasgupta, N.P., Matter 2 (4), 1025 (2020).Google Scholar
Cheng, E. J., Sharafi, A., Sakamoto, J., Electrochim. Acta 223, 85 (2017).10.1016/j.electacta.2016.12.018CrossRefGoogle Scholar
Citrin, M.A., Yang, H., Nieh, S.K., Berry, J., Gao, W., Pan, X., Srolovitz, D.J., Greer, J.R., “From Ion to Atom to Dendrite: Formation and Nanomechanical Behavior of Electrodeposited Lithium,” MRS Bull. 45 (11), 891 (2020).Google Scholar
Porz, L., Swamy, T., Sheldon, B.W., Rettenwander, D., Frömling, T., Thaman, H.L., Berendts, S., Uecker, R., Carter, W.C., Chiang, Y.-M., Adv. Energy Mater. 7 (20), 1701003 (2017).10.1002/aenm.201701003CrossRefGoogle Scholar
Masias, A., Felten, N., Garcia-Mendez, R., Wolfenstine, J., Sakamoto, J., J. Mater. Sci. 54 (3), 2585 (2019).10.1007/s10853-018-2971-3CrossRefGoogle Scholar
LePage, W.S., Chen, Y., Kazyak, E., Chen, K.-H., Sanchez, A.J., Poli, A., Arruda, E.M., Thouless, M.D., Dasgupta, N.P., J. Electrochem. Soc. 166 (2), A89 (2019).10.1149/2.0221902jesCrossRefGoogle Scholar
Herbert, E.G., Hackney, S.A., Thole, V., Dudney, N.J., Phani, P.S., J. Mater. Res. 33 (10), 1347 (2018).Google Scholar
Zhang, L., Yang, T., Du, C., Liu, Q., Tang, Y., Zhao, J., Wang, B., Chen, T., Sun, Y., Jia, P., Li, H., Geng, L., Chen, J., Ye, H., Wang, Z., Li, Y., Sun, H., Li, X., Dai, Q., Tang, Y., Peng, Q., Shen, T., Zhang, S., Zhu, T., Huang, J., Nat. Nanotechnol. 15 (2), 94 (2020).Google Scholar
Figure 0

Figure 1. Schematic of a solid-state battery (a) in the pristine state and (b) after charging causes lithium filaments to grow and induce fracture in the solid-state electrolyte because of stress σ at the crack tip.