Hostname: page-component-77c89778f8-m42fx Total loading time: 0 Render date: 2024-07-17T10:00:16.723Z Has data issue: false hasContentIssue false

Room-temperature diffusion of evaporated Fe atom into SOI materials characterized by scanning Kelvin-SPV method

Published online by Cambridge University Press:  15 July 2004

S. Nakamura*
Affiliation:
Department of Electrical Engineering, Tokyo Metropolitan University, 1-1 Minami-ohsawa, Hachioji, Tokyo 192-0397, Japan
H. Ikeda
Affiliation:
Department of Electrical Engineering, Tokyo Metropolitan University, 1-1 Minami-ohsawa, Hachioji, Tokyo 192-0397, Japan
D. Watanabe
Affiliation:
Department of Electrical Engineering, Tokyo Metropolitan University, 1-1 Minami-ohsawa, Hachioji, Tokyo 192-0397, Japan
M. Suhara
Affiliation:
Department of Electrical Engineering, Tokyo Metropolitan University, 1-1 Minami-ohsawa, Hachioji, Tokyo 192-0397, Japan
T. Okumura
Affiliation:
Department of Electrical Engineering, Tokyo Metropolitan University, 1-1 Minami-ohsawa, Hachioji, Tokyo 192-0397, Japan
Get access

Abstract

The room-temperature diffusion of evaporated Fe atoms into Si and silicon-on-insulator (SOI) materials has been studied by means of the Kelvin-surface photovoltage (SPV) method. The contactless and imaging feature of this technique enabled us to visualize the evidence of the Fe diffusion by using a single sample partly deposited with Fe. The image contrast in the regions between deposited and non-deposited with Fe was clearly observed in the SPV measurements, even after the thin Fe evaporated layer was completely removed off from the SOI surface. In addition, this contrast can be observed down to about 80 nm from the top surface. This result indicates that the Fe atoms can be soluble in the Si layer at room temperature, when Fe atoms are introduced by the vacuum evaporation. Furthermore, the time variation of the depth profile of Fe contamination was also discussed. Our results suggest that the evaporated Fe atoms diffused into the Si layer and dissolved in some form as a recombination center at room temperature.

Keywords

Type
Research Article
Copyright
© EDP Sciences, 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Okumura, T., Eguchi, K., En, A., Suhara, M., Jpn J. Appl. Phys. 40, 5217 (2001) CrossRef
Okumura, T., En, A., Eguchi, K., Suhara, M., Mat. Sci. Eng. B 91–92, 182 (2002) CrossRef
Nakamura, S., En, A., Watanabe, D., Suhara, M., Okumura, T., Appl. Surf. Sci. 216, 113 (2003) CrossRef
Y. Yoshida, S. Ogawa, S. Endou, T. Shimura, M. Umeno, in Proceeding of the 3rd International Symposium on Advanced Science and Technology of Silicon Materials (Kona, Hawaii, USA, 1996), p. 630
Y. Yoshida et al., Hyperfine Interact. 141/142, 157 (2002)
K. Graff: Metal Impurities in Silicon-Device Fabrication (Springer-Verlag Berlin Heidelberg, 1995)
W. Kem, D. A. Puotinen, RCA Rev. 187 (1970)
Watanabe, D., En, A., Nakamura, S., Suhara, M., Okumura, T., Appl. Surf. Sci. 216, 24 (2003) CrossRef