Hostname: page-component-8448b6f56d-cfpbc Total loading time: 0 Render date: 2024-04-18T11:42:40.055Z Has data issue: false hasContentIssue false
  • English
  • Français

The repulsion of electrical contacts crossed by short-circuit currents

Published online by Cambridge University Press:  15 January 2001

D. Piccoz ,
P. Teste ,
R. Andlauer ,
T. Leblanc  and
J. P. Chabrerie
D. Piccoz
Affiliation:
Laboratoire de Génie Électrique de Paris, Plateau du Moulon, 91192 Gif-sur-Yvette, France Schneider Electric, 33 avenue du Maréchal Joffre, 92000 Nanterre Cedex, France
P. Teste*
Affiliation:
Laboratoire de Génie Électrique de Paris, Plateau du Moulon, 91192 Gif-sur-Yvette, France
R. Andlauer
Affiliation:
Laboratoire de Génie Électrique de Paris, Plateau du Moulon, 91192 Gif-sur-Yvette, France
T. Leblanc
Affiliation:
Laboratoire de Génie Électrique de Paris, Plateau du Moulon, 91192 Gif-sur-Yvette, France
J. P. Chabrerie
Affiliation:
Laboratoire de Génie Électrique de Paris, Plateau du Moulon, 91192 Gif-sur-Yvette, France
*
teste@lgep.supelec.fr
Get access

Abstract

The study of forces exerted by an arc on silver-based electrical contacts is important in order to understand the dynamic phenomena concerning the opening or closing phases of contacts in a variety of switching applications. For that, an experimental device was built. It allows us to measure accurately the force on the static electrode and the displacement of the mobile electrode (and hence the force on it) when the two contacts, crossed by a current pulse (from 0 to 4 kA) separate. The measured forces are the sum of Lorentz magnetic forces (constriction force and loop effect force) and blow open forces due to the arc plasma (evaporation and (or) decomposition of contact materials). A simple method allowed us to asses the value of the blow open forces. We have also studied the influence on the measured forces of the contact material, the amplitude of the current pulse, the polarity of the electrodes. For the electrode materials tested in this study (Ag-SnO2, Ag-CdO and Ag-CW), it appeared that forces exerted on cathode and anode are of the same order and that AgSnO2 use allows to have higher forces (and longer opening phase) than for the two other materials and then may decrease the contact welding.

Keywords

Type
Research Article
Information
The European Physical Journal - Applied Physics , Volume 13 , Issue 1 , January 2001 , pp. 59 - 65
Copyright
© EDP Sciences, 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

R. Holm, E. Holm, Electric Contacts: theory and Application, New York: Springer Verlag, 1967, Chap. 11.
Snowdon, A.C., AIEE Trans. 80, 24 (1961).
P. Barkan, A new formulation of the electromagnetic repulsion phenomenon in electric contacts at very high currents, in: Proc. of the 11th ICEC Berlin, June 1982, VDE-Verlag GmbH, pp. 185-188.
Shea, J.J., de Vault, B., Yun-Ko Chien, IEEE Trans. CPMT, Part A 17, 32 (1994).
Holmes, F.A., Slade, P.G., IEEE Trans. CHMT 1, 59 (1978).
J.-P. Chabrerie, Ph. Testé, R. Andlauer, Th. Leblanc, Experimental study of contact opening, Proc. of the 41st Holm Conference on electrical contacts, 1995, p. 194.
Chabrerie, J.-P., Devautour, J., Gouega, A.M., Testé, Ph., Trans, IEEE. CPMT, Part A 18, 322 (1995).
Gouega, A.M., Testé, Ph., Andlauer, R., Leblanc, T., Chabrerie, J.-P., Eur. Phys. J. AP. 11, 111 (2000). CrossRef
A.M. Gouega, Contribution à l'étude des interactions arc-électrodes : étude de l'influence de divers paramètres sur l'érosion des contacts et étude exploratoire des phénomènes à l'ouverture des contacts des appareils de coupure, Ph.D. thesis, University Paris VI, 1995 - 95PA06-6098.
J. Devautour, Contribution à l'étude des interactions arc-électrodes. Influence de la structure métallurgique sur les phénomènes d'érosion des appareils de coupure, Ph.D. thesis, University Paris VI, 1992 - 92PA06-6693.