Hostname: page-component-848d4c4894-xm8r8 Total loading time: 0 Render date: 2024-07-06T23:34:04.408Z Has data issue: false hasContentIssue false

FEM simulation of residual stresses induced by laser Peening

Published online by Cambridge University Press:  12 June 2003

P. Peyre*
Affiliation:
Coopération Laser Franco-Allemande, Laboratoire pour l'Application des Lasers de Puissance (CLFA-LALP), UPR 1578 CNRS, 94114 Arcueil, France
A. Sollier
Affiliation:
Coopération Laser Franco-Allemande, Laboratoire pour l'Application des Lasers de Puissance (CLFA-LALP), UPR 1578 CNRS, 94114 Arcueil, France
I. Chaieb
Affiliation:
Laboratoire Mécanique et Microstructure des Matériaux (LM3), ESA CNRS 8006 – École Nationale Supérieure d'Arts et Métiers, 75013 Paris, France
L. Berthe
Affiliation:
Coopération Laser Franco-Allemande, Laboratoire pour l'Application des Lasers de Puissance (CLFA-LALP), UPR 1578 CNRS, 94114 Arcueil, France
E. Bartnicki
Affiliation:
Coopération Laser Franco-Allemande, Laboratoire pour l'Application des Lasers de Puissance (CLFA-LALP), UPR 1578 CNRS, 94114 Arcueil, France
C. Braham
Affiliation:
Laboratoire Mécanique et Microstructure des Matériaux (LM3), ESA CNRS 8006 – École Nationale Supérieure d'Arts et Métiers, 75013 Paris, France
R. Fabbro
Affiliation:
Coopération Laser Franco-Allemande, Laboratoire pour l'Application des Lasers de Puissance (CLFA-LALP), UPR 1578 CNRS, 94114 Arcueil, France
Get access

Abstract

Benefits from laser Peening have been demonstrated several times in fields like fatigue, wear or stress corrosion cracking. However, in spite of recent work on the calculation of residual stresses, very few authors have considered a finite element method (FEM) approach to predict laser-induced mechanical effect. This comes mainly from the high strain rates involved during LP (106 s−1), that necessitate the precise determination of dynamic properties, and also from the possible combination of thermal and mechanical loadings in the case of LP without protective coatings. In this paper, we aim at presenting a global approach of the problem, starting from the determination of loading conditions and dynamic yield strengths, to finish with FEM calculation of residual stress fields induced on a 12% Cr martensitic stainless steel and a 7075 aluminium alloy.

Keywords

Type
Research Article
Copyright
© EDP Sciences, 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Fox, J.A., Appl. Phys. Lett. 24, 461 (1974) CrossRef
A.H. Clauer, in Shock waves and high strain rate phenomena in metals (Plenum Press, New York, 1981), p. 675
Y. Sano, M. Kimura, K. Sato, M. Obata, A. Sudo, in Proceedings of the 8th International Conference on Nuclear Engineering (ICONE-8), Baltimore (USA), April 2000
S.R. Mannava, US Patents US5591009A, US5584662A, US5584586, 1995-1998
L. Hackel, C. Brent Dane, in Proceedings of SPIE'1998 on High Power Laser and Applications, edited by C.R. Phipps (Santa Fe (USA), Mai 1998)
Peyre, P., Berthe, L., Scherpereel, X., Fabbro, R., Bartnicki, E., J. Appl. Phys. 84, 5985 (1998) CrossRef
Peyre, P., Berthe, L., Fabbro, R., Sollier, A., J. Phys. D: Appl. Phys. 33, 498 (2000) CrossRef
Braisted, W., Brockman, R., Int. J. Fatigue 21, 719 (1999) CrossRef
W. Zhang, L. Yao, Proceedings of the 19th International Conference on The Applications of Lasers and Electro Optics (Icaleo'2000), edited by H. Hugel, A. Matsunawa (Dearborn (USA), 2000), pp. 183-192
J. Lu, Handbook of Measurement of Residual Stresses (Lilbum GA, The Fairmont Press Inc, 1996)
ABAQUS software, User's manual, version 6.1. Hibbitt, Karlsson and Sorensen Inc, 2001
Berthe, L., Fabbro, R., Peyre, P., Tollier, L., Bartnicki, E., J. Appl. Phys. 82, 2826 (1997) CrossRef
P. Ballard, Ph.D. Thesis, École Polytechnique (France), 1991
Forget, P., Jeandin, M., Strudel, J.L., Castex, L., Lu, J., Mater. Manuf. Proc. 5, 501 (1990) CrossRef