Hostname: page-component-7479d7b7d-8zxtt Total loading time: 0 Render date: 2024-07-12T01:30:43.575Z Has data issue: false hasContentIssue false

Experimental investigation of cathode current density distribution in vacuum arc based on ring-shaped electrode

Published online by Cambridge University Press:  23 March 2012

L.J. Wang*
Affiliation:
State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an 710049, Shaanxi Province, P.R. China
L.H. Wang
Affiliation:
State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an 710049, Shaanxi Province, P.R. China
S.L. Jia
Affiliation:
State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an 710049, Shaanxi Province, P.R. China
X. Zhou
Affiliation:
State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an 710049, Shaanxi Province, P.R. China
D. Yang
Affiliation:
State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an 710049, Shaanxi Province, P.R. China
Z.Q. Shi
Affiliation:
State Key Laboratory of Electrical Insulation and Power Equipment, Xi’an Jiaotong University, Xi’an 710049, Shaanxi Province, P.R. China
Get access

Abstract

In this paper, based on ring-shaped cathode and cup-shaped axial magnetic field (AMF) anode configuration system, the current density distribution on the cathode surface was measured. Vacuum arc appearance also was observed by a high-speed camera. The experimental results showed that the current density on the cathode was of the order of 106–107 A/m2. For lower current (3 kA), the current density distribution was relatively uniform. For higher current (6 kA), due to the weaker AMF of cathode side, the arc was more seriously constricted and the current density distribution was more nonuniform, the current density of central area was much larger than that of other peripheral regions in the cathode surface. Compared with two cup-shaped AMF electrode systems, the current constriction was more significant for the same current and gap distance.

Type
Research Article
Copyright
© EDP Sciences, 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Davis, W.D., Miller, H.C., J. Appl. Phys. 40, 2212 (1969)CrossRef
Yushkov, G.Y., Anders, A., Oks, E.M., Brown, I.G., J. Appl. Phys. 88, 5618 (2000)CrossRef
Tanberg, R., Phys. Rev. 35, 1080 (1930)CrossRef
Kimblin, C.W., J. Appl. Phys. 44, 3074 (1973)CrossRef
Shmelev, D.L., Litvinov, E.A., IEEE Trans. Plasma Sci. 25, 533 (1997)CrossRef
Juttner, B., J. Phys. D: Appl. Phys. 34, R103 (2001)CrossRef
Agarwal, M.S., Holmes, R., Current flow-pattern in highcurrent metal-vapor arcs, in Proc. of 7th Int. Conf. on Gas Disch. Appl., London, UK, 1982, pp. 5558Google Scholar
Afanas’ev, V.P., Chaly, A.M., Logatchev, A.A., Shkol’nik, S.M., Zabello, K.K., IEEE Trans. Plasma Sci. 29, 695 (2001)CrossRef
Chaly, A.M., Logatchev, A.A., Zabello, K.K., Shkol’nik, S.M., IEEE Trans. Plasma Sci. 31, 884 (2003)CrossRef
Shkol’nik, S.M., et al., IEEE Trans. Plasma Sci. 33, 1511 (2005)CrossRef
Schellekens, H., Modeling of the diffuse arc in a vacuum circuit-breaker, Ph.D. thesis, Eindhoven University of Technology, Eindhoven, The Netherlands, 1983Google Scholar
Jia, S., Shi, Z., Wang, L., Wang, Z., Rong, M., IEEE Trans. Plasma Sci. 32, 2113 (2004)CrossRef
Shang, W. et al., IEEE Trans. Plasma Sci. 31, 923 (2003)CrossRef
Taylor, E.D., Slade, P.G., Schulman, M.B., IEEE Trans. Plasma Sci. 31, 909 (2003)CrossRef
Hartmann, W., Lawall, A., Renz, R., Wenzel, N., Wietzorek, W., in XXIII ISDEIV, Romania, 2008, pp. 259263