Hostname: page-component-7479d7b7d-pfhbr Total loading time: 0 Render date: 2024-07-13T01:23:19.893Z Has data issue: false hasContentIssue false

Evaluation of workers exposure to magnetic fields

Published online by Cambridge University Press:  21 October 2010

A. Canova
Affiliation:
Politecnico di Torino, Dipartimento di Ingegneria Elettrica, 10129 Torino, Italy
F. Freschi*
Affiliation:
Politecnico di Torino, Dipartimento di Ingegneria Elettrica, 10129 Torino, Italy
M. Repetto
Affiliation:
Politecnico di Torino, Dipartimento di Ingegneria Elettrica, 10129 Torino, Italy
Get access

Abstract

Following ICNIRP Guidelines of 1998, European Parliament in 2004 has stated the reference levels for workers exposure to electromagnetic fields. In low frequency regime, due to the nature of the basic mechanism of short term interaction, the exposure limits are based on the values of induced eddy currents inside human body, thus electromagnetic simulation is an important tool for the assessment of electromagnetic field exposure. This paper presents a method for computing eddy currents inside human body and applies the method to the evaluation of eddy currents induced by a resistance spot welding system. A comparison between results obtained with two different models of human body and with different discretization levels is performed and results are discussed.

Type
Research Article
Copyright
© EDP Sciences, 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Directive of the European Parliament, of the Council, On the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields) (2004)
ICNIRP – International Commission on Non-Ionizing Radiation Protection, Health Phys. 74, 494 (1998)
IEC Standard 62226-1:2004-11, Exposure to electric or magnetic fields in the low and intermediate frequency range – methods for calculating the current density and internal electric field induced in the human body. Part 1: General (2004)
Dawson, T., Caputa, K., Suchly, M., Phys. Med. Biol. 47, 2561 (2002) CrossRef
Tonti, E., IEEE Trans. Magn. 38, 333 (2002) CrossRef
Freschi, F., Giaccone, L., Repetto, M., Compel 27, 1343 (2008) CrossRef
U.A.N. NATICK/TR-89/044, Anthropometric survey of US army personnel: methods and summary statistics (1988)
IEC Standard 62226-3-1:2007-05, Exposure to electric or magnetic fields in the low and intermediate frequency range – methods for calculating the current density and internal electric field induced in the human body. Part 3-1: Exposure to electric fields – analytical and 2D numerical models (2007)
Sachse, F., Werner, C., Waarden, C., Dossel, O., Comput. Med. Imaging Graph. 24, 165 (2000) CrossRef
Cole, K., Cole, R., J. Chem. Phys. 1, 341 (1941) CrossRef
Gabriel, S., Lau, R., Gabriel, C., Phys. Med. Biol. 41, 2271 (1996) CrossRef