No CrossRef data available.
Article contents
RELIABILITY ANALYSIS FOR SENSOR NETWORKS AND THEIR DATA ACQUISITION: A SYSTEMATIC LITERATURE REVIEW
Published online by Cambridge University Press: 19 June 2023
Abstract
Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.
The use of sensor networks (SNs) on the surface or the inside of large-scale components allows the continuous acquisition of data on the applied loads and their structural integrity. A lot of publications on SN's system reliability deal with this topic from a hardware- or a data- and energy-oriented viewpoint. To give an overview on the state of the art in the field of reliability-oriented concept-optimization of SNs, a Systematic Literature Review is conducted. The found literature is used to investigate how different models combine the different viewpoints to analyse the system reliability. By analysing the results regarding the used reliability indicators and methods to assess the system reliability from the different viewpoints, it can be observed that most publications deal with the accuracy, loss and delay of data as well as the energy consumption in SNs. Few publications use common modelling methods like reliability block diagrams or Markov chains with a focus on the hardware reliability. Furthermore, none of the found publications combines the data, hardware and energy perspective and uses them to optimize a SN regarding its reliability from all three viewpoints.
- Type
- Article
- Information
- Creative Commons
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.- Copyright
- The Author(s), 2023. Published by Cambridge University Press
References
Aalamifar, F. and Lampe, L. (2018), “Cost-Efficient QoS-Aware Data Acquisition Point Placement for Advanced Metering Infrastructure”, IEEE Transactions on Communications, Vol. 66, No. 12, pp. 6260–6274. https://doi.org/10.1109/TCOMM.2018.2858263.CrossRefGoogle Scholar
Abiodun, A.S., Anisi, M.H., Ali, I., Akhunzada, A. and Khan, M.K. (2017), “Reducing Power Consumption in Wireless Body Area Networks: A Novel Data Segregation and Classification Technique”, IEEE Consumer Electronics Magazine, Vol. 6, No. 4, pp. 38–47. https://doi.org/10.1109/MCE.2017.2715518.CrossRefGoogle Scholar
Ahmad, W., Hasan, O., Pervez, U. and Qadir, J. (2017), “Reliability modeling and analysis of communication networks”, Journal of Network and Computer Applications, Vol. 78, pp. 191–215. https://doi.org/10.1016/j.jnca.2016.11.008.CrossRefGoogle Scholar
Ahmed, S., Ali, M.T., Alothman, A.A., Nawaz, A., Shahzad, M., Shah, A.A., Ahmad, A., Khan, M.Y.A., Najam, Z. and Shaheen, A. (2020), “EH-UWSN: Improved Cooperative Routing Scheme for UWSNs Using Energy Harvesting”, Journal of Sensors, Vol. 2020, pp. 1–18. https://doi.org/10.1155/2020/8888957.Google Scholar
Ameyaw, D.A. and Söffke, D. (2021), “False Alarm-Improved Detection Capabilities of Multi-sensor-Based Monitoring of Vibrating Systems”, European Workshop on Structural Health Monitoring. EWSHM 2020. Lecture Notes in Civil Engineering, Volume 127, pp. 467–480. https://doi.org/10.1007/978-3-030-64594-6_46.CrossRefGoogle Scholar
Beard, S., Liu, C.-C. and CHANG, F.-K. (2007), “Design of a robust SHM system for composite structures”, in Davis, L.P., Henderson, B.K. and McMickell, M.B. (Eds.), Industrial and Commercial Applications of Smart Structures Technologies 2007, Sunday 18 March 2007, San Diego, California, SPIE, p. 652709. https://doi.org/10.1117/12.717319.CrossRefGoogle Scholar
Denyer, D. and Tranfield, D. (2010), “Producing a Systematic Review”, in Buchanan, D.A. and Bryman, A. (Eds.), The Sage handbook of organizational research methods, SAGE, Los Angeles, pp. 671–689.Google Scholar
Dobmann, N., Bach, M. and Eckstein, B., “Challenges of an Industrialized Acousto-Ultrasonic Sensor System Installation on Primary Aircraft Structure”.Google Scholar
Dong, T. and Kim, N. (2018), “Cost-Effectiveness of Structural Health Monitoring in Fuselage Maintenance of the Civil Aviation Industry †”, Aerospace, Vol. 5, No. 3, p. 87. https://doi.org/10.3390/aerospace5030087.CrossRefGoogle Scholar
Farhat, A., Guyeux, C., Makhoul, A., Jaber, A., Tawil, R. and Hijazi, A. (2019), “Impacts of wireless sensor networks strategies and topologies on prognostics and health management”, Journal of Intelligent Manufacturing, Vol. 30, No. 5, pp. 2129–2155. https://doi.org/10.1007/s10845-017-1377-4.CrossRefGoogle Scholar
Flanigan, K.A. and Lynch, J.P. (2022), “Optimal Event-Based Policy for Remote Parameter Estimation in Wireless Sensing Architectures Under Resource Constraints”, IEEE Transactions on Wireless Communications, Vol. 21, No. 7, pp. 5293–5304. https://doi.org/10.1109/TWC.2021.3139289.CrossRefGoogle Scholar
Gurupriya, M. and Sumathi, A. (2022), “HOFT-MP: A Multipath Routing Algorithm Using Hybrid Optimal Fault Tolerant System for WSNs Using Optimization Techniques”, Neural Processing Letters, Vol. 54, No. 6, pp. 5099–5124. https://doi.org/10.1007/s11063-022-10852-3.CrossRefGoogle Scholar
He, W., Hu, G.-Y., Zhou, Z.-J., Qiao, P.-L., Han, X.-X., Qu, Y.-Y., Wei, H. and Shi, C. (2018), “A new hierarchical belief-rule-based method for reliability evaluation of wireless sensor network”, Microelectronics Reliability, Volume 87, pp. 33–51. https://doi.org/10.1016/j.microrel.2018.05.019.CrossRefGoogle Scholar
Ibrahim, H., Mostafa, N., Halawa, H., Elsalamouny, M., Daoud, R., Amer, H., Adel, Y., Shaarawi, A., Khattab, A. and ElSayed, H. (2019), “A layered IoT architecture for greenhouse monitoring and remote control”, SN Applied Sciences, Vol. 1, No. 3. https://doi.org/10.1007/s42452-019-0227-8.CrossRefGoogle Scholar
Kafi, M.A., Othman, J.B. and Badache, N. (2018), “A Survey on Reliability Protocols in Wireless Sensor Networks”, ACM Computing Surveys, Vol. 50, No. 2, pp. 1–47. https://doi.org/10.1145/3064004.CrossRefGoogle Scholar
Kartakis, S., Yang, S. and Mccann, J.A. (2017), “Reliability or Sustainability”, ACM Transactions on Sensor Networks, Vol. 13, No. 3, pp. 1–27. https://doi.org/10.1145/3064840.CrossRefGoogle Scholar
Kumar, K., Kumar, S., Kaiwartya, O., Cao, Y., Lloret, J. and Aslam, N. (2017), “Cross-Layer Energy Optimization for IoT Environments: Technical Advances and Opportunities”, Energies, Vol. 10, No. 12, p. 2073. https://doi.org/10.3390/en10122073.CrossRefGoogle Scholar
Lachmayer, R., Mozgova, I., Reimche, W., Colditz, F., Mroz, G. and Gottwald, P. (2014), “Technical Inheritance: A Concept to Adapt the Evolution of Nature to Product Engineering”, Procedia Technology, Vol. 15, pp. 178–187. https://doi.org/10.1016/j.protcy.2014.09.070.CrossRefGoogle Scholar
Li, C.-C., Ramanna, V.K., Webber, D., Hunter, C., Heck, T. and Dezfouli, B. (2022a), “Sensifi: A Wireless Sensing System for Ultrahigh-Rate Applications”, IEEE Internet of Things Journal, Volume 9, pp. 2025–2043. https://doi.org/10.1109/JIOT.2021.3089159.CrossRefGoogle Scholar
Li, M., Fang, C.-C. and Ferng, H.-W. (2022b), “Stability and performance analysis of wireless powered communication networks”, Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, Vol. 236, No. 3, pp. 439–450. https://doi.org/10.1177/1748006X211016776.Google Scholar
Li, S. and Huang, J. (2017), “GSPN-Based Reliability-Aware Performance Evaluation of IoT Services”, in 2017 IEEE International Conference on Services Computing (SCC), 25.06.2017 - 30.06.2017, Honolulu, HI, USA, IEEE, pp. 483–486. https://doi.org/10.1109/SCC.2017.70.CrossRefGoogle Scholar
Mallorquí, A., Zaballos, A. and Briones, A. (2021), “DTN Trustworthiness for Permafrost Telemetry IoT Network”, Remote Sensing, Vol. 13, No. 22, pp. 1–24. https://doi.org/10.3390/rs13224493.CrossRefGoogle Scholar
Mengist, W., Soromessa, T. and Legese, G. (2020), “Method for conducting systematic literature review and meta-analysis for environmental science research”, MethodsX, Vol. 7, p. 100777. https://doi.org/10.1016/j.mex.2019.100777.CrossRefGoogle ScholarPubMed
MISHRA, S., CHUNG, H., SURENDRANATH, H. and CHANG, F.-K. (2017), “Digital Structural Health Monitoring for SHM Design”, in Structural Health Monitoring 2017, 12.09.2017 - 14.09.2017, DEStech Publications, Inc, Lancaster, PA. https://doi.org/10.12783/shm2017/13942.CrossRefGoogle Scholar
Mohammadsalehi, A., Safaei, B., Monazzah, A.M.H., Bauer, L., Henkel, J. and Ejlali, A. (2022), “ARMOR: A Reliable and Mobility-Aware RPL for Mobile Internet of Things Infrastructures”, IEEE Internet of Things Journal, Vol. 9, No. 2, pp. 1503–1516. https://doi.org/10.1109/JIOT.2021.3088346.CrossRefGoogle Scholar
Morse, L., Sharif Khodaei, Z. and Aliabadi, M.H. (2018), “Reliability based impact localization in composite panels using Bayesian updating and the Kalman filter”, Mechanical Systems and Signal Processing, Vol. 99, pp. 107–128. https://doi.org/10.1016/j.ymssp.2017.05.047.CrossRefGoogle Scholar
Nguyen, H.A.D. and Ha, Q.P. (2022), “Wireless Sensor Network Dependable Monitoring for Urban Air Quality”, IEEE Access, Vol. 10, pp. 40051–40062. https://doi.org/10.1109/ACCESS.2022.3166904.CrossRefGoogle Scholar
Nitesh, K., Azharuddin, M. and Jana, P.K. (2018), “A novel approach for designing delay efficient path for mobile sink in wireless sensor networks”, Wireless Networks, Vol. 24, No. 7, pp. 2337–2356. https://doi.org/10.1007/s11276-017-1477-2.CrossRefGoogle Scholar
Nuhu, B.K., Aliyu, I., Adegboye, M.A., Ryu, J.K., Olaniyi, O.M. and Lim, C.G. (2021), “Distributed network-based structural health monitoring expert system”, Building Research & Information, Vol. 49, No. 1, pp. 144–159. https://doi.org/10.1080/09613218.2020.1854083.CrossRefGoogle Scholar
Nuhu, B.K., Olaniyi, O.M., Aliyu, I., Ryu, J.K. and Lim, C.G. (2019), “Wireless Sensor Network based Structural Health Monitoring Expert System”, International Journal of Wearable Device, No. 1, pp. 9–16. https://doi.org/10.21742/ijwd.2019.7.1.02.CrossRefGoogle Scholar
Okafor, K.C. and Longe, O.M. (2022), “Smart deployment of IoT-TelosB service care StreamRobot using software-defined reliability optimisation design”, Heliyon, Vol. 8, No. 6, 1–18. https://doi.org/10.1016/j.heliyon.2022.e09634.CrossRefGoogle ScholarPubMed
Saeed, U., Jan, S.U., Lee, Y.-D. and Koo, I. (2021), “Fault diagnosis based on extremely randomized trees in wireless sensor networks”, Reliability Engineering & System Safety, Volume 205, p. 107284. https://doi.org/10.1016/j.ress.2020.107284.CrossRefGoogle Scholar
Sause, M.G.R. and Jasiūnienė, E. (2021), Structural Health Monitoring Damage Detection Systems for Aerospace, Springer International Publishing, Cham. https://doi.org/10.1007/978-3-030-72192-3.CrossRefGoogle Scholar
Šećerov, I., Popov, S., Sladojević, S., Milin, D., Lazić, L., Milošević, D., Arsenović, D. and Savić, S. (2021), “Achieving High Reliability in Data Acquisition”, Remote Sensing, Vol. 13, No. 3, p. 345. https://doi.org/10.3390/rs13030345.CrossRefGoogle Scholar
Shabanighazikelayeh, M. and Koyuncu, E. (2022), “Optimal Placement of UAVs for Minimum Outage Probability”, IEEE Transactions on Vehicular Technology, Vol. 71, No. 9, pp. 9558–9570. https://doi.org/10.1109/TVT.2022.3178165.CrossRefGoogle Scholar
Snyder, H. (2019), “Literature review as a research methodology: An overview and guidelines”, Journal of Business Research, Vol. 104, pp. 333–339. https://doi.org/10.1016/j.jbusres.2019.07.039.CrossRefGoogle Scholar
Sun, W., Wei, K., Liu, Z., Li, Q. and Xu, X. (2022a), “Linear Quadratic Gaussian Control for Wireless Communication Reliability for a Mobile Monitoring Robot in a UHV Power Substation”, IEEE Systems Journal, Volume 16, pp. 4149–4159. https://doi.org/10.1109/JSYST.2022.3143866.CrossRefGoogle Scholar
Sun, Y., Fesenko, H., Kharchenko, V., Zhong, L., Kliushnikov, I., Illiashenko, O., Morozova, O. and Sachenko, A. (2022b), “UAV and IoT-Based Systems for the Monitoring of Industrial Facilities Using Digital Twins: Methodology, Reliability Models, and Application”, Sensors (Basel, Switzerland), Vol. 22, No. 17. https://doi.org/10.3390/s22176444.CrossRefGoogle Scholar
Tommaso, A., Ada, F., Elia, L., Marco, M., Enza, P., Alessandro, P., Valerio, and Vignoli, (2020), “Reliability and Availability Evaluation of Linear LoRaWAN Sensor Network Architectures for Pipeline Monitoring”. https://doi.org/10.1109/I2MTC43012.2020.CrossRefGoogle Scholar
Torres-Carrion, P.V., Gonzalez-Gonzalez, C.S., Aciar, S. and Rodriguez-Morales, G. (2018), “Methodology for systematic literature review applied to engineering and education”, in 2018 IEEE Global Engineering Education Conference (EDUCON), 17.04.2018 - 20.04.2018, Tenerife, IEEE, pp. 1364–1373. https://doi.org/10.1109/EDUCON.2018.8363388.CrossRefGoogle Scholar
Ur Rahman, H., Wang, G., Alam Bhuiyan, M.Z. and Chen, J. (2021), “In-network generalized trustworthy data collection for event detection in cyber-physical systems”, PeerJ. Computer science, Vol. 7, e504. https://doi.org/10.7717/peerj-cs.504.CrossRefGoogle Scholar
Wang, R., Tong, Y., Tian, L. and Wang, D. (2021), “Reliability Analysis of Different Fault-Tolerant Mechanisms in Wireless Sensor Networks”, in 2021 3rd International Conference on Applied Machine Learning (ICAML), 23.07.2021 - 25.07.2021, Changsha, China, IEEE, pp. 250–256. https://doi.org/10.1109/ICAML54311.2021.00060.CrossRefGoogle Scholar
Wurst, J., Mozgova, I. and Lachmayer, R. (2022), “Sustainability Assessment of Products manufactured by the Laser Powder Bed Fusion (LPBF) Process”, Procedia CIRP, Vol. 105, pp. 243–248. https://doi.org/10.1016/j.procir.2022.02.040.CrossRefGoogle Scholar
Xiao, Y. and Watson, M. (2019), “Guidance on Conducting a Systematic Literature Review”, Journal of Planning Education and Research, Vol. 39, No. 1, pp. 93–112. https://doi.org/10.1177/0739456X17723971.CrossRefGoogle Scholar
Xing, L. (2020), “Reliability in Internet of Things: Current Status and Future Perspectives”, IEEE Internet of Things Journal, Vol. 7, No. 8, pp. 6704–6721. https://doi.org/10.1109/JIOT.2020.2993216.CrossRefGoogle Scholar
Xing, L. (2021), “Cascading Failures in Internet of Things: Review and Perspectives on Reliability and Resilience”, IEEE Internet of Things Journal, Vol. 8, No. 1, pp. 44–64. https://doi.org/10.1109/JIOT.2020.3018687.CrossRefGoogle Scholar
Yadav, S.K., S, MISHRA., Kopsaftopoulos, F. and CHANG, F.-K. (2021), “Reliability of crack quantification via acousto-ultrasound active-sensing structural health monitoring using surface-mounted PZT actuators/sensors”, Structural Health Monitoring, Vol. 20, No. 1, pp. 219–239. https://doi.org/10.1177/1475921720921536.CrossRefGoogle Scholar
Zhang, S., Ma, W., Yu, M., Zhang, F. and Chen, J. (2021), “Design of monitoring system for redundant communication power supply based on ZigBee”, Journal of Physics: Conference Series, Vol. 1754, No. 1, pp. 1–7. https://doi.org/10.1088/1742-6596/1754/1/012046.Google Scholar
You have
Access
Open access