No CrossRef data available.
Article contents
Design for robotic disassembly
Published online by Cambridge University Press: 16 May 2024
Abstract
Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.
This study envisions a unified paradigm for design for automated disassembly. The goal is to integrate disassembly insights related to precious material recovery with the design phase for sustainable lifecycle management.Targeting plastic products with embedded electronics, the collaboration between design and robotic engineers aims to program a robot for disassembly for the LEGO® motor (45603) as demonstration, emphasizing a disassembly map as a vital tool. By considering the limitations and strengths of robots, this research pioneers a design for disassembly framework.
Keywords
- Type
- Systems Engineering and Design
- Information
- Creative Commons
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.- Copyright
- The Author(s), 2024.
References
Badurdeen, F., Aydin, R. and Brown, A., (2018), "A multiple lifecycle-based approach to sustainable product configuration design", Journal of cleaner production, Vol. 200, pp. 756-769. https://doi.org/10.1016/j.jclepro.2018.07.317CrossRefGoogle Scholar
Baldé, C.P., Yamamoto, T., and Forti, V. (2023), Datasets on invisible e-waste supporting the International E-waste Day 2023 - Statistical Briefing, United Nations Institute for Training and Research, Bonn, Germany.Google Scholar
Bogue, R. (2007), "Design for disassembly: a critical twenty-first century discipline", Assembly Automation, Vol. 27 No. 4, pp. 285-289. https://doi.org/10.1108/01445150710827069CrossRefGoogle Scholar
Dario, P., Rucci, M., Guadagnini, C. and Laschi, C. (1994), "An investigation on a robot system for disassembly automation", Proceedings of the 1994 IEEE International Conference on Robotics and Automation, San Diego, CA, USA, pp. (1994), "An investigation on a robot system for disassembly automation", Proceedings of the 1994 IEEE International Conference on Robotics and Automation, San Diego, CA, USA, Vol 4, pp. 3515-3521. https://doi.org/10.1109/ROBOT.1994.351030CrossRefGoogle Scholar
De Fazio, F., Bakker, C., Flipsen, B. and Balkenende, R. (2021), "The Disassembly Map: A new method to enhance design for product repairability", Journal of Cleaner Production, Vol. 320 No. 128552, pp. 1 - 12. https://doi.org/10.1016/j.jclepro.2021.128552CrossRefGoogle Scholar
Engelen, B., De Marelle, D., Kellens, K. and Peeters, R.J. (2023), "Intuitive teaching approach for robotic disassembly", 30th CIRP Life Cycle Engineering Conference, Procedia CIRP, Vol. 116, pp. 384-389. https://doi.org/10.1016/j.procir.2023.02.065Google Scholar
Favi, C. Marconi, M., Germani, M. and Mandolini, M. (2019), "A design for disassembly tool oriented to mechatronic product de-manufacturing and recycling", Advanced Engineering Informatics, Vol 39, pp. 62-79. https://doi.org/10.1016/j.aei.2018.11.008CrossRefGoogle Scholar
Hochwallner, M., Sundin, E., and Johansen, K. (2022), "Automation in Remanufacturing: Applying Sealant on a Car Component," In: Ng, A.H.C. Ng, Syberfeldt, A., Högberg, D. and Holm, M. (Eds.), SPS2022: Proceedings of the 10th Swedish Production Symposium (Advances in Transdisciplinary Engineering 21), IOS Press, Amsterdam, pp. 147–158, https://doi.org/10.3233/ATDE220134Google Scholar
ISO (2015), ISO 14001:2015: Environmental management systems - Requirements with guidance for use, International Organization for Standardization, Geneva.Google Scholar
Lee, H.M., Sundin, E. and Nasr, N. (2012), "Review of end-of-life management issues in sustainable electronic products" In Seliger, G. (Ed.) Sustainable Manufacturing. Springer, Berlin, Heidelberg, pp. 119-124. https://doi.org/10.1007/978-3-642-27290-5_18CrossRefGoogle Scholar
Lieder, M. & Rashid, A. 2016, "Towards circular economy implementation: a comprehensive review in context of manufacturing industry", Journal of cleaner production, Vol. 115, pp. 36-51. https://doi.org/10.1016/j.jclepro.2015.12.042CrossRefGoogle Scholar
Lu, Q., Ren, Y., Jin, H., Meng, L., Li, L., Zhang, C. and Sutherland, J.W. (2020), "A hybrid metaheuristic algorithm for a profit-oriented and energy-efficient disassembly sequencing problem", Robotics and Computer-Integrated Manufacturing, Vol. 61, pp. 1-10. https://doi.org/10.1016/j.rcim.2019.101828CrossRefGoogle Scholar
Mandolini, M., Favi, C., Germani, M. and Marconi, M. (2018), "Time-based disassembly method: how to assess the best disassembly sequence and time of target components in complex products", Advanced Manufacturing Technology, Vol. 95, pp. 409-430. https://doi.org/10.1007/s00170-017-1201-5CrossRefGoogle Scholar
Marconi, M., Palmieri, G., Callegari, M. and Germani, M. (2019), "Feasibility Study and Design of an Automatic System for Electronic Components Disassembly", Journal of Manufacturing Science and Engineering, Vol. 141 No. 2. https://doi.org/10.1115/1.4042006CrossRefGoogle Scholar
Mathieux, F., Ardente, F., Bobba, S., Nuss, P., Blengini, G. et al. . (2017), Critical Raw Materials and the Circular Economy – Background report, EUR 28832 EN, Publications Office of the European Union, Luxembourg. https://doi.org/10.2760/378123CrossRefGoogle Scholar
Stahel, W.R. (2016), "Circular economy", Nature, Vol. 531, No. 7595, pp. 435-438. https://doi.org/10.1038/531435aCrossRefGoogle ScholarPubMed
Sundin, E., Elo, K. and Mien Lee, H. (2012), "Design for automatic end-of-life processes", Assembly Automation, Vol. 32 No. 4, pp. 389-398. https://doi.org/10.1108/01445151211262447Google Scholar
You have
Access
Open access