Hostname: page-component-8448b6f56d-tj2md Total loading time: 0 Render date: 2024-04-23T17:30:44.401Z Has data issue: false hasContentIssue false

A Vertical PN Junction Utilizing the Impurity Photovoltaic Effect for the Enhancement of Ultra-thin Film Silicon Solar Cells

Published online by Cambridge University Press:  17 June 2013

D. J. Paez
Affiliation:
McMaster University, Department of Engineering Physics, 1280 Main Street West, Hamilton, ON L8S 4L7, Canada.
E. Huante-Ceron
Affiliation:
McMaster University, Department of Engineering Physics, 1280 Main Street West, Hamilton, ON L8S 4L7, Canada.
A. P. Knights
Affiliation:
McMaster University, Department of Engineering Physics, 1280 Main Street West, Hamilton, ON L8S 4L7, Canada.
Get access

Abstract

We report a preliminary study on the influence of indium doping on ultra-thin film silicon solar cells. The design of the cell reported here is such that it should elucidate the impact of the indium dopant, which is concentrated in the thin film. Indium, a deep level in silicon (0.157 eV above the valence band), acts as a p-type dopant and a sensitizer. Absorption through sub-bandgap transitions is expected based on the previously reported Impurity PhotoVoltaic (IPV) Effect [1]. It is proposed that the implementation of a novel vertical PN junction configuration together with the IPV effect enhances the efficiency of ultra-thin solar cells. The most efficient cell fabricated to date, in our research group, has a conversion efficiency of 4.3 % (active silicon thickness of 2.5 μm), a short-circuit current density of 14.9 mA/cm2 and an open-circuit voltage of 0.51 V under 1 sun illumination. The cell has not been optimized with any type of light trapping technique and 11.24 % of the cell surface is covered by the metal contacts. Numerical simulation indicates that for the geometry used, the maximum efficiency that may be expected is 9.8 % (compared to the 4.3 % measured).

Type
Articles
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Keevers, M. J., et al. ., J. Appl. Phys. 75(8):40224031 (1994).CrossRefGoogle Scholar
Green, M., Third Generation Photovoltaics, (Springer Series in Photonics, 2003) pp. 15.Google Scholar
Green, M., Solar Cells – Operating Principles, Technology and System Applications, (The University of New South Wales, 1998) pp. 6283.Google Scholar
Huante-Ceron, E., PhD. Thesis, McMaster University, 2011.Google Scholar
Bermel, P., et al. ., Opt. Express 15, 1698617000 (2007).CrossRefGoogle Scholar
Feldrapp, K., et al. ., Prog. Photovolt: Res. Appl. 2003; 11:105112.CrossRefGoogle Scholar
Prentice, J.S.C., J. Phys. D: Appl. Phys. 33(2000) 31393145.10.1088/0022-3727/33/24/302CrossRefGoogle Scholar