Hostname: page-component-5c6d5d7d68-wp2c8 Total loading time: 0 Render date: 2024-08-07T12:16:45.301Z Has data issue: false hasContentIssue false
  • English
  • Français

Ultra CO Tolerant PtMo/PtRu anodes for PEMFCs

Published online by Cambridge University Press:  11 February 2011

Sarah C Ball  and
David Thompsett
Sarah C Ball
Affiliation:
Johnson Matthey Technology Centre, Blounts Court, Sonning Common Reading, RG4 9NH UK
David Thompsett
Affiliation:
Johnson Matthey Technology Centre, Blounts Court, Sonning Common Reading, RG4 9NH UK
Get access

Abstract

Progress has been made in designing an anode electrode that can tolerate CO levels of several thousand ppm which are a typical output of a fuel processor consisting of a reformer and water-gas-shift unit only. The combination of a PtMo catalyst that is capable of electrochemically oxidising CO and a PtRu catalyst that can tolerate high levels of CO2 arranged in a bilayer configuration, has been shown to tolerate 2000 ppm CO in H2 with a relatively small loss in fuel cell performance. Further improvements in the ability to tolerate higher levels of CO with lower performance losses are expected due to improved PtMo catalyst design.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 756: Symposia EE/FF – Solid-State Ionics – Materials for Fuel Cells and Fuel Processors , 2002 , FF5.1
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ball, S., Cooper, S., Dooley, K., Hards, G. and Hoogers, G., ETSU Contract Report F/02/00160/REP (2001).Google Scholar
2. Wilkinson, D.P. and Thompsett, D., in Proceedings of the 2nd International Symposium on New Materials for Fuel Cells & Modern Battery Systems, (Ecole Polytechnique de Montreal, 1997) p. 266.Google Scholar
3. Niedrach, L.W. & Weinstock, I.B., Electrochem. Technol., 3, 270 (1965).Google Scholar
4. Mukerjee, S., Lee, S.J., Ticianelli, E.A., McBreen, J., Grgur, B.N., Markovic, N.M., Ross, P.N., Giallombardo, J.R. and DeCastro, E.S., Electrochem. Solid-State Lett., 2, 12 (1999).Google Scholar
5. Cooper, S.J., Gunner, A.G., Hoogers, G. and Thompsett, D., in Proceedings of the 2nd International Symposium on New Materials for Fuel Cells & Modern Battery Systems, (Ecole Polytechnique de Montreal, 1997) p. 286.Google Scholar
6. Gunner, A.G., Hyde, T.I., Potter, R.J. and Thompsett, D., European Patent No. 0838872 (29 April 1998).Google Scholar
7. Grgur, B.N., Markovic, N.M. and Ross, P.N., J. Electrochem. Soc., 146, 1613 (1999).Google Scholar
8. Denton, J., Gascoyne, J.M. and Thompsett, D., European Patent No. 0731520 (11 September 1996).Google Scholar
9. Ball, S., Hodgkinson, A., Hoogers, G., Maniguet, S., Thompsett, D. and Wong, B., Electrochem. Solid-State Lett., 5, A31 (2002).Google Scholar
10. Crabb, E.M., Ravikumar, M.K., Qian, Y., Russell, A.E., Maniguet, S., Yao, J., Thompsett, D., Hurford, M. and Ball, S.C., Electrochem. Solid-State Lett., 5, A5 (2002).Google Scholar
11. Mukerjee, S. and Urian, R.C., Electrochim. Acta, 47, 3219 (2002).Google Scholar
12. Grgur, B.N., Markovic, N.M. and Ross, P.N., in Proton Conducting Membrane Fuel Cells, PV 98–27, edited by Gottesfeld, S., Fuller, T.F. and Halpert, G. (The Electrochemical Society Proceedings Series, Pennington, NJ (1998)) pp. 176–185.Google Scholar
13. Grgur, B.N., Markovic, N.M. and Ross, P.N., J. Phys. Chem. B, 102, 2494 (1998).Google Scholar
14. Maniguet, S., PhD. Thesis, University of Southampton, 2002.Google Scholar
15. Buatier de Mongeot, F., Scherer, M., Gleich, B., Kopatzki, E. and Behm, R.J., Surf. Sci., 411, 249 (1998).Google Scholar
16. Davies, J.C., Hayden, B.E. and Pegg, D.J., Surf. Sci., 467, 118 (2000).Google Scholar
17. Lu, C. and Masel, R.I., J. Phys. Chem. B, 105, 9793 (2001).Google Scholar
18. Liu, P. and Nørskov, K.K., Fuel Cells, 1, 192 (2001).Google Scholar
19. Koper, M.T.M., Shubina, T.E. and van Santen, R.A., J. Phys. Chem. B, 106, 686 (2002).Google Scholar