Hostname: page-component-76fb5796d-wq484 Total loading time: 0 Render date: 2024-04-26T06:29:53.554Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis, Microstructure, and Mechanical Properties of FeCo-VC Composites

Published online by Cambridge University Press:  26 February 2011

Hongbin Bei  and
E. P. George
Hongbin Bei
Affiliation:
Hbei1@utk.edu, The University of Tennessee, Materials science and Engineering, 1The University of Tennessee,, Department of Materials Science and Engineering, knoxville, TN, 37996-2200, United States, 865-5744343, 8655747659
E. P. George
Affiliation:
Georgeep@ornl.gov, Oak Ridge National Laboratory, Materials Science and Technology Division, Oak Ridge, TN, 37831-6115, United States
Get access

Abstract

Fe-Co-V-C quaternary alloys were drop cast and directionally solidified to obtain an in situ composite. It is found that the fully eutectic structure occurs at a composition of Fe - 40.5Co -10.4V- 8.6C (at. %) in a drop-cast alloy. Directional solidification of this composition in a high-temperature optical floating zone furnace produces a well-aligned microstructure, consisting of sub-micron VC fibers (~19% by volume) embedded in a FeCo-5V solid solution matrix containing ~ 1% C. The temperature dependencies of mechanical properties of this composite were examined by tensile tests and the composite was found to have higher yield strength and lower ductility than the matrix.

Keywords

compositedirectional solidificationmicrostructure
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 980: Symposium II – Advanced Intermetallic-Based Alloys , 2006 , 0980-II05-14
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Westbrook, J.H. and Fleischer, R.L., editors: Intermetallic Compounds - Principles and Practice (John Wily & Sons, New York 1995).Google Scholar
2. Sauthoff, G.: Intermetallics (VCH publishers, New York 1995).10.1002/9783527615414Google Scholar
3. Sundar, R.S. and Deevi, S.C., Int. Mat. Rev. 50, 157 (2005).10.1179/174328005X14339Google Scholar
4. George, E.P., Gubbi, A.N., Baker, I., and Robertson, L., Mat. Sci. Eng. A 329, 325 (2002).10.1016/S0921-5093(01)01594-5Google Scholar
5. Johnson, D.R., Chen, X.F., Oliver, B.F., Noebe, R.D. and Whittenberger, J.D., Intermetallics 3, 99 (1995).10.1016/0966-9795(95)92674-OGoogle Scholar
6. Bei, H., Pharr, G.M. and George, E.P., J. Mat. Sci. 39, 3975(2004),10.1023/B:JMSC.0000031479.32138.84Google Scholar
7. Milenkovic, S. and Caram, R., J. Mater. Proc. Tech. 143, 629 (2003).10.1016/S0924-0136(03)00449-7Google Scholar
8. Henshall, G.A., Strum, M.J., Bewlay, B.P. and Sutliff, J.A., Metall. Mater. Trans. A 28, 2555. (1997).10.1007/s11661-997-0013-xGoogle Scholar
9. Raj, S.V., Whittenberger, J.D., Zeumer, B. and Sauthoff, G., Intermetallics 7, 743 (1999).10.1016/S0966-9795(98)00095-8Google Scholar
10. Milenkovic, S., Coelho, A. A. and Caram, R., J. Crystal Growth 211, 485 (2000).10.1016/S0022-0248(99)00783-6Google Scholar
11. Walter, J. L., Cline, H. E., Metall. Trans. 1, 1221 (1970).10.1007/BF02900234Google Scholar
12. Misra, A., Wu, Z.L., Kush, M.T. and Gibala, R., Philos. Mag. A 78, 533 (1998).Google Scholar
13. Chang, K.M., Darolia, R. and Lipsit, H. A., Acta Metall. Mater. 40, 2722 (1992).10.1016/0956-7151(92)90343-DGoogle Scholar
14. Bei, H., George, E. P. and Pharr, G. M., Scr. Mater. 51, 875 (2004).10.1016/j.scriptamat.2004.07.001Google Scholar
15. Bei, H., George, E. P., Kenik, E. A. and Pharr, G. M., Acta Mater. 51, 6241 (2003).10.1016/S1359-6454(03)00447-6Google Scholar
16. George, E.P., Bei, H., Serin, K. and Pharr, G.M., Mater. Sci. Forum 426–434, 4579 (2003).10.4028/www.scientific.net/MSF.426-432.4579Google Scholar
17. Bei, H., George, E.P., Kenik, E.A. and Pharr, G.M., Zeit. für Metallkunde 95, 505 (2004).10.3139/146.017974Google Scholar
18. Bei, H., George, E.P. and Pharr, G.M., Intermetallics 11, 283 (2003)10.1016/S0966-9795(02)00251-0Google Scholar
19. Bei, H. and George, E.P., Acta Mater. 53, 69 (2005).10.1016/j.actamat.2004.09.003Google Scholar
20. Bei, H. and George, E.P., Mater. Sci. Forum 539–543, 1495 (2007).10.4028/www.scientific.net/MSF.539-543.1495Google Scholar