Hostname: page-component-848d4c4894-4rdrl Total loading time: 0 Render date: 2024-07-05T02:03:55.009Z Has data issue: false hasContentIssue false
  • English
  • Français

Surface Structure and Morphology of SrBi2Ta2O9 (SBT) Thin Films

Published online by Cambridge University Press:  15 February 2011

Tingkai Li ,
Pete Zawadzki ,
Richard A. Stall ,
Chien-Hsiung Peng ,
Yongfei Zhu  and
Seshu B. Desu
Tingkai Li
Affiliation:
EMCORE Corporation, 394 Elizabeth Avenue, Somerset, NJ 08873, TingLi@emcore.com
Pete Zawadzki
Affiliation:
EMCORE Corporation, 394 Elizabeth Avenue, Somerset, NJ 08873, TingLi@emcore.com
Richard A. Stall
Affiliation:
EMCORE Corporation, 394 Elizabeth Avenue, Somerset, NJ 08873, TingLi@emcore.com
Chien-Hsiung Peng
Affiliation:
Sharp Microelectronics Technology, Inc.Camas, WA 98607
Yongfei Zhu
Affiliation:
Department of Materials Science and Engineering, VPI&SU, Blacksburg, VA 24060
Seshu B. Desu
Affiliation:
Department of Materials Science and Engineering, VPI&SU, Blacksburg, VA 24060
Get access

Abstract

SrBi2Ta2O9 (SBT) films have been prepared by MOCVD processes. The phase formation, surface structure, morphology and surface roughness of SBT films on Pt/Ti/SiO2/Si wafers were measured by XRD, SEM, AFM and ellipsometry. It was found that amorphous SBT formed below 500°C, amorphous and polycrystalline growth occurred successively between 500°C and 650°C. The surface roughness of the SBT thin films also increased with increasing deposition temperature. The AFM results showed the nucleation of SBT started by island formation, then continued across the surface of substrates at lower deposition temperatures. When the SBT film was deposited at higher temperatures, the nucleation and grain growth occurred at the same time, resulting in an inhomogencous structure and much higher surface roughness. Therefore, a two step process is used to improve surface roughness and interface mismatch between film and substrate. In addition, the relationships between surface structure, morphology and the electric properties of SBT thin films were also investigated.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 440: Symposia CA – Structure and Evolution of Surfaces , 1996 , 407
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Araujo, C.A. Paz de, Cuchiaro, J. D., Scott, M.C., and McMillan, L.D., International Patent Publication No. WO 93/12542 (24 June 1993).Google Scholar
2. Amanuma, K., Hase, T., and Miyasaka, Y., Appl. Phys. Lett. 66, 221 (1995).Google Scholar
3. Li, T.K., Chen, T.-C., Peng, C.H., and Desu, S.B., paper presented at 7th International Symposium on Integrated Ferroelectrics held in Colorado Springs, Colorado on March 20- 22, 1995.Google Scholar
4. Desu, S.B. and Li, T.K., Mat. Sci. and Eng. (B), 34, L4– L8 (1995).Google Scholar
5. Desu, S.B. and Vijay, D.P., Mat. Sci. and Eng. (B), 32, 75 (1995).Google Scholar
6. Li, T. K., Zhu, Y., Desu, S.B., Peng, C. H. and Nagata, M., Appl. Phys. Lett. 68 (5) 616 (1996)Google Scholar
7. Smolenskii, G.A., Isupov, V.A. and Agranovskaya, A.I., Soy. Phys. Solid State, 3, 651 (1961).Google Scholar
8. Rao, E.C. Subba, J. Chem. Phys., 34[2], 695, (1961).Google Scholar