Hostname: page-component-5c6d5d7d68-tdptf Total loading time: 0 Render date: 2024-08-18T00:19:26.987Z Has data issue: false hasContentIssue false
  • English
  • Français

Shape Memory Thin Films of the System Ti- (Ni-Pd-Cu)

Published online by Cambridge University Press:  10 February 2011

E. Quandt  and
H. Holleck
E. Quandt
Affiliation:
Forschungszentrum Karlsruhe GmbH, Institut für Materialforschung I, D-76021 Karlsruhe, Germany
H. Holleck
Affiliation:
Forschungszentrum Karlsruhe GmbH, Institut für Materialforschung I, D-76021 Karlsruhe, Germany
Get access

Abstract

Free-standing shape memory thin films of the system Ti-Ni-Pd-Cu exhibiting the two-way-effect have been fabricated by d.c. magnetron sputtering onto unheated substrates followed by annealing and training processes. Their transformation temperatures were investigated by differential scanning calorimetry and electrical resistivity measurements. By the Ni-Pd substitution the transformation temperatures (austenite/martinsite finish temperature; Af/Mf) could be varied between 32°C/-38°C for the binary TiNi films to 570°C/498°C for the binary TiPd films. By the Ni-Cu substitution the transformation hysteresis (Af/Mf) could be reduced from 70°C for the binary film to 20°C for films with 10 at % Cu. A similar behavior was observed for TiNiPdCu films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 459: Symposium Y – Materials for Smart Systems II , 1996 , 465
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Quandi, E., Holleck, H., Microsystem Technology 1 (1995), 178.Google Scholar
[2] Busch, J.D., Johnson, A.D., Lee, C.H., Stevenson, D.A., J. Appl. Phys. 68 (1990), 6224.Google Scholar
[3] Holleck, H., Kirchner, S., Quandt, E., Schloβmacher, P., Proc. Actuator 94, Bremen, Germany, 15.-17.6. 1994, p. 361.Google Scholar
[4] k. Kuribayashi, Tanaguchi, T., Yositake, O., Ogawa, S., Mat. Res. Soc. Symp. Proc., Vol. 276, 1990, p. 167.Google Scholar
[5] Quandt, E., Halene, C., Holleck, H., Feit, K., Kohl, M., Schloβmacher, P., Skokan, A., Skrobanek, K.D., Sensors and Actuators A53 (1996), 434.Google Scholar
[6] Lo, Y.C., Wu, S.K., Scripta Metallurgica et Materialia 26 (1992), 1097.Google Scholar
[7] Moore, J.J., Yi, H.C., Mat. Res. Soc. Symp. Proc. Vol. 246, 1992, p. 331.Google Scholar