Hostname: page-component-848d4c4894-tn8tq Total loading time: 0 Render date: 2024-06-25T13:50:11.015Z Has data issue: false hasContentIssue false
  • English
  • Français

Role of Oxygen Vacancies on the Ferroelectric Properties of Pzt Thin Films

Published online by Cambridge University Press:  25 February 2011

Chi Kong Kwok  and
Seshu B. Desu
Chi Kong Kwok
Affiliation:
Department of Materials Science and Engineering Virginia Polytechnic Institute & State University, Blacksburg, VA 24061
Seshu B. Desu
Affiliation:
Department of Materials Science and Engineering Virginia Polytechnic Institute & State University, Blacksburg, VA 24061
Get access

Abstract

The properties of ferroelectric thin films can be significantly influenced by the presence of point defects. The concentration of vacancies presented in these thin films is known to be one of the key parameters causing the degradation of these films when these films are subjected to polarization reversals.

To study the effects of the vacancy concentration on the ferroelectric properties, sol gel PZT films and powders were annealed in different oxygen partial pressures. For the PZT films, the reduction of oxides to pure metals was not observed even with films annealed at 2×10−5 atmosphere of oxygen partial pressure. Samples annealed at low oxygen partial pressure (for instance, 10−3 and 2×10−5 atmosphere), which has more Pb and O2 depletions and consequently has more Pb and O2 vacancies, cannot be switched easily. The ratios of coercive field after and before fatigue increase as the defect concentrations of the annealed samples increase.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 243: Symposium G – Ferroelectric Thin Films II , 1991 , 393
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Duiker, H., Beale, P. and Scott, J., Bull. Am. Phys. Soc., 33, 539 (1988)Google Scholar
2. Saleneck, W., Ferroelectrics, 4, 97 (1972)Google Scholar
3. Takahashi, M., Jap. J. Appl. Phys., 9, 1236 (1970)Google Scholar
4. Callaby, D., J.Appl. Phys., 36, 2751 (1965)Google Scholar
5. Carl, K. and Hardtl, K., Ferroelectrics, 17, 47 (1978)Google Scholar
6. Lambeck, P. and Jonker, G., J. Phys. Chlem. Solids, 47, 453 (1986)Google Scholar
7. Yoo, I. and Desu, S., submitted to J. Mater. Eng. Sci.Google Scholar
8. Yi, G., Wu, Z. and Sayer, M., J. Appl. Phys., 64, 2717 (1988)Google Scholar
9. Schwartz, R., Sandia National Laboratory, private communication.Google Scholar
10. Prisedsky, V., Shishkovsky, V. and Klimov, V., Ferroelectrics, 17, 465 (1978)Google Scholar
11. Desu, S. and Kwok, C., Mat. Res. Soc. Symp. Proc., 200, 267 (1990)Google Scholar
12. Prisedsky, V., Komarov, V., Pan'ko, G. and Klimov, V., Ferroeletrics, 23, 23 (1980)Google Scholar
13. Handbook of X-ray Photoelectron Spectroscopy, Wagner, C., ed. (Perkin-Elmer Corp., Minnesota, 1980)Google Scholar
14. Rajopadhye, N. Bhoraskar, S. and Badrinarayan, S., Surface and Interface Analysis, 10, 392 (1987)Google Scholar
15. Tomashpol'skii, Y., Sov. Phys. Solid State, 18, 1001 (1976)Google Scholar