Hostname: page-component-84b7d79bbc-7nlkj Total loading time: 0 Render date: 2024-07-26T12:29:16.164Z Has data issue: false hasContentIssue false
  • English
  • Français

Recent Developments in the Utilization of Western U.S. Coal Conversion Ash

Published online by Cambridge University Press:  25 February 2011

O. E. Manz  and
Dennis L. Laudal
O. E. Manz
Affiliation:
Coal By-Products Utilization Laboratory, Mining and Mineral Resources Research Institute, University of North Dakota, Grand Forks, ND 58202
Dennis L. Laudal
Affiliation:
Energy Research Center, University of North Dakota, Grand Forks, ND 58202
Get access

Abstract

The utilization of ashes from combustion or gasification of western U.S. coals offers many possibilities for useful products. Of the possible uses, the following have been identified in an earlier study [1] as having sufficient potential for laboratory development and testing: mineral wool, sulfur concrete, high flexural-strength ceramics, replacement of cement in concrete, and road stabilization. Three lignite-derived ash products from the Beulah, ND, site were used in the present study: fixed-bed gasification ash; a dry scrubber ash; a combination bottom ash/economizer ash from an electrical power plant, Where possible, ASTM fabrication and testing procedures were used. Mineral wool of similar physical character to commercial wool and at lower potential cost was produced using 100 percent of various western ashes. Sulfur concrete utilizing 80% ash and 20% modified sulfur developed flexural and compressive strengths in excess of 2,250 and 5,000 psi, respectively. An economically competitive vitrified ceramic product with flexural strength above 7,800 psi was produced from a mixture of 50% ash, 45% sand, and 5% clay. By using a total ash mixture of 26% gasifier ash and 74% combustion ash, a very satisfactory, economical and durable roadbed material was developed. The replacement of up to 50% of the cement in concrete with western fly ash produces economical, high strength concrete.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 86: Symposium N – Fly Ash and Coal Conversion By-Products III , 1986 , 343
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Stevenson, R.J. and McCarthy, G.J., in Fly Ash and Coal Conversion By- Products: Characterization, Utilization and Disposal II, edited by McCarthy, G.J. and Glasser, F.P. and Roy, D.M., Mat. Res. Soc. Symp. Proc. Vol.65 (Materials Research Society, Pittsburgh, 1986), pp. 77–90.Google Scholar
2. McCarthy, G.J., Powder Diffraction 1, 50–56 (1986).Google Scholar
3. Manz, O.E., Hassett, D.J., Hassett, D.F., Laudal, D.L., and Ellman, R.C., Technical and Economic Feasibility of Bulk Utilization and Metal Recovery for Ashes from an Integrated Coal Gasification Facility, GRI 86/0203.1 Final Report, Vol. III (Gas Research Institute, Chicago, 1986) 130 pp.Google Scholar
4. Manz, O.E., Cem. Concr. Res. 14, 513–520 (1984).Google Scholar
5. Severson, D.E., Manz, O.E. and Mithcell, M.J., in Fly Ash and Coal Conversion By-Products: Characterization, Utilization and Disposal I, edited by McCarthy, G.J. and Lauf, R.J., Mat. Res. Soc. Symp. Proc. Vol.43 (Materials Research Society, Pittsburgh, 1985) pp. 195–210.Google Scholar
6. McCarthy, G.J., Keller, L.P., Schields, P.J., Elless, M.P. and Galbreath, K.C., Cem. Concr. Res., 14, 479–484 (1984).Google Scholar
7. McCarthy, G.J., Keller, L.P., Stevenson, R.J., Galbreath, K.C. and Steinwand, A.M., in Fly Ash and Coal Conversion By-Products: Characterization, Utilization and Disposal I, edited by McCarthy, G.J. and Lauf, R.J., Mat. Res. Soc. Proc. Vol.43 (Materials Research Society, Pittsburgh, 1985) pp. 165–176.Google Scholar
8. McCarthy, G.J., Hassett, D.J., Manz, O.E., Groenewold, G.H., Stevenson, R.J., Henke, K.R., Kumarathasan, P., in Fly Ash and Coal Conversion By-Products: Characterization, Utilization and Disposal II, edited by McCarthy, G.J. and Glasser, F.P. and Roy, D.M., Mat. Res. Soc. Symp. Proc. Vol.65 (Materials Research Society, Pittsburgh, 1986), pp. 310–310.Google Scholar
9. McCarthy, G.J., Swanson, K.D., Keller, L.P. and Blatter, W.C., Cem. Concr. Res. 14, 471–478 (1984).Google Scholar
10. Stevenson, R.J., Cem. Concr. Res. 14, 485–490 (1984).Google Scholar
11. Stevenson, R.J. and Larsen, R.A., in Fly Ash and Coal Conversion By- Products: Characterization, Utilization and Disposal I, edited by McCarthy, G.J. and Lauf, R.J., Mat. Res. Soc. Proc. Vol.43 (Materials Research Society, Pittsburgh, 1985) pp. 177–186.Google Scholar
12. Lamar, J.E., Rock Wool from Illinois Mineral Resources, Bulletin 61, Illinois State Geological Survey, 262 pp. (1934).Google Scholar
13. Sullivan, T.A., in Corrosion-Resistand Sulphur Concrete – Design and Construction Manual, (Sulphur Institute, 1986) pp. 6–20.Google Scholar
14. White, J.G., Modern Railroads, October, 1984, pp. 44–47.Google Scholar
15. Williams, T.D. and Ali, A., Development of Power Poles from Fly Ash. Phase II, Electric Power Research Institute, Project 851-1, September, 1979.Google Scholar
16. Manz, O.E. and Manz, B.A., in Fly Ash and Coal Conversion By-Products: Characterization, Utilization and Disposal I, edited by McCarthy, G.J. and Lauf, R.J., Mat. Res. Soc. Proc. Vol.43 (Materials Research Society, Pittsburgh, 1985) pp. 129–140.Google Scholar
17. Hassett, D.J., McCarthy, G. J. and Henke, K.R., in Fly Ash and Coal Conversion By-Products: Characterization, Utilization and Disposal II, edited by McCarthy, G.J. and Glasser, F.P. and Roy, D.M., Mat. Res. Soc. Symp. Proc. Vol.65 (Materials Research Society, Pittsburgh, 1986), pp. 285–300.Google Scholar