Hostname: page-component-77c89778f8-gq7q9 Total loading time: 0 Render date: 2024-07-20T01:23:38.933Z Has data issue: false hasContentIssue false

Processing and Characterization of CVD c-BN Films and c-BN/Diamond Bilayers

Published online by Cambridge University Press:  11 February 2011

Tien-Syh Yang
Affiliation:
Department of Materials Science and Engineering, National Dong Hwa University, Taiwan, ROC.
Jong-Bin Cheng
Affiliation:
Department of Materials Science and Engineering, National Dong Hwa University, Taiwan, ROC.
Ming-Show Wong
Affiliation:
Department of Materials Science and Engineering, National Dong Hwa University, Taiwan, ROC.
Get access

Abstract

The paper reports the syntheses of c-BN films by the reaction of B2H6 and NH3 in the hydrogen and argon mixture using microwave plasma-assisted chemical vapor deposition (MPCVD). The effects of NH3/B2H6 ratios, hydrogen addition, pulsed-DC substrate-bias voltage and diamond as bufferlayer on the formation of c-BN were investigated. As-grown films are characterized by FTIR, grazing-incidence XRD, and SEM. The NH3/ B2H6 = 3 was selected to obtain a better crystallized BN films with moderate deposition rate. When the hydrogen content was at 85 vol.% in the gas mixture and the substrate bias at −200 V, the maximum c-BN content about 65 % was obtained. However, the film was easily cracked in a few hours. The film deposited at lower substrate biasing of −100 V could preserve for a few days without peeling off, although it had lower c-BN content about 40 %. Nanocrystalline diamond film, deposited from 1 vol.% CH4/Ar plasma, as bufferlayer can promote the heteroepitaxial growth of c-BN, resulting in 80 % c-BN content. The c-BN/diamond bilayer were adherent with a total thickness of 1.2 μm.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCE

1. Mirkarimi, P. B., McCarty, K. F., and Medlin, D. L., Mat. Sci. Eng. R21, 47 (1997).Google Scholar
2. Vel, L., Demazeau, G., and Etourneau, J., Mat. Sci. Eng. B10, 149 (1991).Google Scholar
3. Mckenzie, D. R., Cockayne, D. J. H., Muller, D. A., Murakawa, M., Miyake, S., Wantanabe, S., and Fallon, P., J. Appl. Phys. 70, 3007 (1991).Google Scholar
4. Kester, D. J., Ailey, K. S., Davis, R. F., and More, K. L., J. Mater. Res. 8, 1213 (1993).Google Scholar
5. Kester, D., Alley, K., Lichtenwainer, D., and Davis, R., J. Vac. Sci. Technol. A12, 3074 (1994).Google Scholar
6. Reinke, S., Kuhr, M., Kuhlisch, W., and Kassing, R., Diam. Relat. Mater. 4, 272 (1995).Google Scholar
7. Yang, T. S., Tsai, T. H., Lee, C. H., Cheng, C. L., and Wong, M. S., Thin Solid Films 398–399, 285 (2001).Google Scholar
8. Zhang, F., Guo, Y., Song, Z., and Chen, G., Appl. Phys. Lett. 65, 971 (1994).Google Scholar
9. Ma, X., Yang, J., He, D., and Chen, G., Thin Solid Films 322, 37 (1998).Google Scholar
10. Ma, X., Yue, J., He, D., and Chen, G., Mat. Lett. 36, 206 (1998).Google Scholar
11. Wang, W. L., Liao, K.J., Wang, S. X., and Sun, Y. W., Thin Solid Films 368, 283 (2000).Google Scholar
12. Ichiki, T., Momose, T., and Yoshida, T., J. Appl. Phys. 75, 1330 (1994).Google Scholar
13. Yang, H., Iwamoto, C., Yoshida, T., Thin Solid Films 407, 67 (2002).Google Scholar
14. Kiel, F., Cotarelo, M., Delplancke, M. P., Winand, R., Thin Solid Films 270, 118 (1995).Google Scholar
15. Koizumi, S., Murakami, T., and Inuzuka, T., Appl. Phys. Lett. 57, 563 (1990).Google Scholar
16. Yoshikawa, M., Ishida, H., Ishitani, A., Koizumi, S., and Inuzuka, T., Appl. Phys. Lett. 58, 1387 (1991).Google Scholar
17. Wang, L., Pirouz, P., Argitia, A., Ma, J.S., and Angus, J.C., Appl. Phys. Lett. 63, 1336 (1993).Google Scholar
18. Chai, W. P., Gu, Y. S., Li, M., Mai, Z. H., Li, Q. Z., Yuan, L., and Pang, S. J., Appl. Phys. Lett. 64, 1941 (1994).Google Scholar
19. Friedmann, T. A., Bernardez, L.J., McCarty, K. F., Klaus, E. J., Ottesen, D. K., Johnsen, H. A., and Clift, W. M., Appl. Phys. Lett. 63, 1342 (1993).Google Scholar
20. Pryor, R. W., Padmanabhan, K. R., and Chawla, K., Diamond Relat. Mater. 4, 128 (1995).Google Scholar
21. Okamoto, M., Utsumi, Y., and Osaka, Y., Jpn. J. Appl. Phys. 29, L1004 (1990).Google Scholar
22. Saitoh, H., and Yarbrough, W. A., Appl. Phys. Lett. 58, 2482 (1991).Google Scholar
23. Pascallon, J., Stambouli, V., Ilias, S., Bouchier, D., Nouet, G., Silva, F., and Gicquel, A., Diamond Relat. Mater. 8, 325 (1999).Google Scholar
24. Pascallon, J., Stambouli, V., Ilias, S., Bouchier, D., Nouet, G., Silva, F., and Gicquel, A., Mat. Sci. Eng. B59, 239 (1999).Google Scholar
25. Kuhr, M., Reinke, S., Kulisch, W., Diam. Relat. Mater. 4, 375 (1995).Google Scholar
26. Yang, T.S., Tsai, T.H., Lee, C.H., Cheng, C.L., Wong, M.S., Thin Solid Films 398–399, 285 (2001).Google Scholar
27. Bartl, A., Bohr, S., Haubner, R., Lux, B., Int. J. Refract. Metals & Hard Mater. 14, 145 (1996).Google Scholar
28. Hackenberger, L. B., Pilione, L. J., Messier, R., Lamaze, G. P., J. Vac. Sci. Technol. A12, 1569 (1994).Google Scholar
29. Loeffler, J., Konyashin, I., Bill, J., Uhlig, H., and Aldinger, F., Diam. Relat. Mater. 6, 608 (1997).Google Scholar
30. Konyashin, I., Khvostov, V., Babaev, V., Guseva, M., Bill, J., and Aldinger, F., Diam. Relat. Mater. 8, 2053 (1999).Google Scholar
31. Zhang, W.J., and Matsumoto, S., Chem. Phys. Lett. 330, 243 (2000).Google Scholar
32. Freudenstein, R., Reinke, S., and Kulisch, W., Surf. and Coat. Tech. 97, 270 (1997).Google Scholar
33. Dworschak, W., Jung, K., Ehrhardt, H., Thin Solid Films 254, 65 (1995).Google Scholar
34. Konyashin, I., Bill, J., and Aldinger, F., Chem. Vapor Deposition 3, 239 (1997).Google Scholar
35. Yang, T.S., Lai, J.Y., Cheng, C.L., and Wong, M.S., J. Appl. Phys. 92, 2133 (2002).Google Scholar
36. Yang, T.S., Lai, J.Y., Cheng, C.L., and Wong, M.S., Diamond Relat. Mater. 10, 2161 (2001).Google Scholar
37. Zhang, F. Q., Song, Z. Z., Li, J. Q., Chen, G. H., Jiang, X. L., and Cong, Q. Z., Thin Solid Films 199, 123 (1991).Google Scholar