Hostname: page-component-848d4c4894-nr4z6 Total loading time: 0 Render date: 2024-06-02T09:02:12.897Z Has data issue: false hasContentIssue false
  • English
  • Français

Powder Processing of Fe3Al-Based Iron-Aluminide Alloys

Published online by Cambridge University Press:  26 February 2011

V.K. Sikka ,
R.H. Baldwin ,
J.H. Reinshagen ,
J.R. Knibloe  and
R.N. Wright
V.K. Sikka
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831
R.H. Baldwin
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831
J.H. Reinshagen
Affiliation:
Ametek, Eighty Four, PA 15330
J.R. Knibloe
Affiliation:
EG&G Idaho, P.O. Box 1625, Idaho Falls, ID 83415
R.N. Wright
Affiliation:
EG&G Idaho, P.O. Box 1625, Idaho Falls, ID 83415
Get access

Abstract

The production, characterization, and consolidation of Fe3Al-based iron-aluminide powders are described. The consolidated powders were fabricated into sheet. The sheet was tensile tested from room temperature to 800°C and creep tested in the temperature range of 450 to 704°C. Mechanical properties were compared for nitrogen and argon atomized powders. Mechanical properties were also compared for argon atomized powders of Fe3Al alloys containing 2 and 5% Cr.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 213: Symposium Q – High-Temperature Ordered Intermetallic Alloys IV , 1990 , 901
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Hook, R.E., Johnson, D.W., and Erfort, J.P., “A Review of Some of the Key Work on the Mechanical Properties of Fe-Al Alloys,” presented at ASM Materials Week, Orlando, FL, 1986 (unpublished).Google Scholar
2. Sikka, V.K., McKamey, C.G., Howell, C.R., and Baldwin, R.H., ORNL/TM 11465, March 1990.Google Scholar
3. Knibloe, J.R., Wright, R.N., and Sikka, V.K. in 1990 Advances in Powder Metallurgy, compiled by Andreotti, E.R. and McGeehan, P.J. (Metal Powder Industries Federation Proc. 2, Princeton, NJ 1990) p. 219.Google Scholar
4. Sikka, V.K., Baldwin, R.H., Howell, C.R., and Reinshagen, J.H. in 1990 Advances in Powder Metallurgy, compiled by Andreotti, E.R. and McGeehan, P.J. (Metal Powder Industries Federation Proc. 2, Princeton, NJ 1990) p. 207.Google Scholar