Hostname: page-component-84b7d79bbc-fnpn6 Total loading time: 0 Render date: 2024-07-26T05:42:51.531Z Has data issue: false hasContentIssue false
  • English
  • Français

Poly-Si Thin Film Transistors Fabricated with Rapid Thermal Processing

Published online by Cambridge University Press:  21 February 2011

E. Campo ,
J.J. Pedroviejo ,
E. Scheid ,
D. Bielle-Daspet ,
A. Yahia Messaoud ,
G. Sarrabayrouse  and
A. Martinez
E. Campo
Affiliation:
LAAS-CNRS, 7, Av. du Colonel Roche 31077 TOULOUSE Cedex, France
J.J. Pedroviejo
Affiliation:
LAAS-CNRS, 7, Av. du Colonel Roche 31077 TOULOUSE Cedex, France
E. Scheid
Affiliation:
LAAS-CNRS, 7, Av. du Colonel Roche 31077 TOULOUSE Cedex, France
D. Bielle-Daspet
Affiliation:
LAAS-CNRS, 7, Av. du Colonel Roche 31077 TOULOUSE Cedex, France
A. Yahia Messaoud
Affiliation:
LAAS-CNRS, 7, Av. du Colonel Roche 31077 TOULOUSE Cedex, France
G. Sarrabayrouse
Affiliation:
LAAS-CNRS, 7, Av. du Colonel Roche 31077 TOULOUSE Cedex, France
A. Martinez
Affiliation:
LAAS-CNRS, 7, Av. du Colonel Roche 31077 TOULOUSE Cedex, France
Get access

Abstract

In this work, we studied the rapid crystallization and the rapid tbermal oxidation of amorphous silicon films deposited at 465°C by low-pressure chemical vapor deposition (LPCVD) from disilane. The crystallization is well-controlled and the thermal bugdet is reduced compared to conventional processes. Results concerning the electrical and structural characteristics of poly-Si thin film transistors (TF7) are given. Furthermore, we obtained after plasma hydrogenation better mobilities in the case of rapid thermal processing (RTP) (μp-61 cm2/V.s, VT−8.3 V, subtbreshold slope−-0.8 V/decade, ION/IOFF− 1. 106 for p-type and μn-80 cm2/V.s, VT−3. 7 V, subthreshold slope−1.4 VWdecade, ION/IOFF−5.104 for n-type) compared to conventional processing performed at 600°C. The mobilities are improved by a factor of 2 to 3 despite the smaller grain size in the silicon films. We also showed a correlation between the optical absorption coefficient k (at 405nm) and the mobility wbicb appears not only dependent upon, the grain size but also upon the grain quality (grain boundaries and defects inside the grain).

This study shows that the structural and electrical properties of thin-films and oxides fabricated by RTP are at least as good as those obtained by conventional techniques.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 303: Symposium G – Rapid Thermal and Integrated Processing II , 1993 , 389
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Chiang, A., Huang, T. Y., Wu, I-W, Zarzycki, M. H. and Fuse, M., Mater. Res. Soc. Symp. Proc., Pittsburgh, vol. 106, pp. 305, 1988 Google Scholar
[2] Morita, Y. and Noguchi, T., Jpn. J. Appl. Phys., 28, pp. L309, 1989 CrossRefGoogle Scholar
[3] Scheid, E., Mauduit, B. De, Taurines, P. and Bielle-Daspet, D., Jpn. J. Appl. Phys., 29, 11, pp. L2105, 1990 Google Scholar
[4] Nakazawa, K., J. Appl. Phys., 69, 3, pp. 1703, 1991 CrossRefGoogle Scholar
[5] Nakazawa, K., Tanaka, K., Suyama, S., Kato, K. and Kohda, S., SID'90 Digest, 311, 1990 Google Scholar
[6] Ohyu, K., Wade, Y., Lijima, S. and Natsuaki, S. N., J. Electrochem. Soc, 137, 7, pp. 2261, 1990 Google Scholar
[7] Sarrabayrouse, G., Taurines, P., Scheid, E., Bielle-Daspet, D. and Martinez, A., Thin Solid Films, 204, pp. 33, 1991 Google Scholar
[8] Scheid, E., Kouassi, L. K., Henda, R., Samitier, J. and Morante, J. R., Mat. Sci. and Eng., B17, pp. 185, 1993 Google Scholar
[9] Meakin, D. B., Economou, N. A., Coxon, P. A., Stoemenos, J., Lowe, A. and Migliorato, P., Appl. Surf. Sci., 30, pp. 372, 1987 Google Scholar
[10] Takabatake, M., Ohwada, J-I, Ono, Y. A., Ono, K., Mimura, A. and Konishi, N., IEEE Trans. Elect. Dev., 38, 6, pp. 1303, 1991 Google Scholar
[11] Lewis, A. G., Wu, I-W, Huang, T. Y., Chiang, A. and Bruce, R. H., IEDM Technical Digest, pp. 843, 1990 Google Scholar
[12] Seto, J. Y. W., J. Appl. Phys., 46, 12, pp. 5247, 1975 CrossRefGoogle Scholar