Hostname: page-component-848d4c4894-pjpqr Total loading time: 0 Render date: 2024-06-23T17:08:53.811Z Has data issue: false hasContentIssue false

Polycrystalline Silicon Films Formed by Solid-Phase Crystallization of Amorphous Silicon: the Substrate Effects on Crystallization Kinetics and Mechanism

Published online by Cambridge University Press:  10 February 2011

Y.-H. Song
Affiliation:
Semiconductor Division, ETRI, Taejon 305-600, KOREA
S.-Y. Kang
Affiliation:
Semiconductor Division, ETRI, Taejon 305-600, KOREA
K. I. Cho
Affiliation:
Semiconductor Division, ETRI, Taejon 305-600, KOREA
H. J. Yoo
Affiliation:
Semiconductor Division, ETRI, Taejon 305-600, KOREA
J. H. Kim
Affiliation:
Department of Materials Science and Engineering, KAIST, Taejon 305-701, KOREA
J. Y. Lee
Affiliation:
Department of Materials Science and Engineering, KAIST, Taejon 305-701, KOREA
Get access

Abstract

The substrate effects on the solid-phase crystallization of amorphous silicon (a-Si) have been extensively investigated. The a-Si films were prepared on two kinds of substrates, a thermally oxidized Si wafer (SiO2/Si) and a quartz, by low-pressure chemical vapor deposition (LPCVD) using Si2H6 gas at 470 °C and annealed at 600 °C in an N2 ambient for crystallization. The analysis using XRD and Raman scattering shows that crystalline nuclei are faster formed on the SiO2/Si than on the quartz, and the time needed for the complete crystallization of a-Si films on the SiO2/Si is greatly reduced to 8 h from ˜15 h on the quartz. In this study, it was first observed that crystallization in the a-Si deposited on the SiO2/Si starts from the interface between the a-Si film and the thermal oxide of the substrate, called interface-induced crystallization, while random nucleation process dominates on the quartz. The very smooth surface of the SiO2/Si substrate is responsible for the observed interface-induced crystallization of a-Si films.

Type
Research Article
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Yamauchi, N and Reif, R., J. Appl. Phys. 75, 3235 (1995).Google Scholar
2. Nakazawa, K., J. Appl. Phys. 69, 1703 (1991).Google Scholar
3. Hasegawa, S., Watanabe, S., Inokura, T. and Kurata, Y., J. Appl. Phys. 77, 1938 (1995).Google Scholar
4. Hasegawa, S., Nakamura, T. and Kurata, Y., Jpn. J. Appl. Phys. 31, 161 (1992).Google Scholar
5. Hong, C. H., Park, C. Y. and H.- Kim, J., J. Appl. Phys. 71, 5427 (1992).Google Scholar
6. Tsu, R., Hernandez, J. G-, Chao, S. S., Lee, S. C. and Tanaka, K., Appl. Phys. Lett. 40, 534 (1982).Google Scholar
7. Nakamura, A., Emoto, F., Fujii, E., Yamamoto, A., Uemoto, Y., Senda, K. and Kano, G., J. Appl. Phys. 66, 4248 (1989).Google Scholar
8. Kim, J. H., Lee, J. Y. and Nam, K. S., J. Appl. Phys. 77, 95 (1995).Google Scholar
9. Voutsas, A. T. and Hatalis, M. K., J. Elec. Mat. 23, 319 (1994).Google Scholar