Hostname: page-component-7c8c6479df-xxrs7 Total loading time: 0 Render date: 2024-03-28T10:14:32.946Z Has data issue: false hasContentIssue false

Physical Characterization of Thin Films of Lithium Niobate Deposited on Silicon Substrates

Published online by Cambridge University Press:  16 February 2011

Robert C. Baumann
Affiliation:
Department of Electrical and Computer Engineering, Rice University, Houston, TX 77005
Timothy A. Rost
Affiliation:
Department of Electrical and Computer Engineering, Rice University, Houston, TX 77005
Thomas A. Rabson
Affiliation:
Department of Electrical and Computer Engineering, Rice University, Houston, TX 77005
Get access

Abstract

Thin films (.1-.6 μm) of LiNbO3 have been deposited on silicon substrates by reactive rf sputtering. Under optimized deposition conditions the resulting thin films of LiNbO3 were optically transparent, adhered well to the silicon substrates, and were found to be polycrystalline and uniaxial with the c axis oriented normal to the silicon surface. Optical microscopy and scanning electron microscopy were used to examine film morphology. Both methods indicated that the films were smooth and contained no gross irregularities. The ratio of oxygen to niobium in these films was measured by Rutherford backscattering to be approximately 3 to 1. Auger electron spectroscopy depth profiling revealed that the films had the expected ratio of Li, Nb, and O. This information, together with Bragg x-ray diffraction data, indicates that the thin films deposited on silicon were stoichiometric, crystalline LiNbO3.

Type
Research Article
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Takada, S., Ohnishi, M., Hayakawa, H., and Mikoshiba, N., Appl. Phys. Lett. 24 (10), 490492 (1974).Google Scholar
2. Okada, A., Ferroelectrics 14. 739742 (1976).Google Scholar
3. Hewig, G.H., Jain, K., Sequeda, F.O., Tom, R., and Wang, Po-Wen, Thin Solid Films 88 (1), 6774 (1982).Google Scholar
4. Griffel, G., Ruschin, S., Hardy, A., Itzkovitz, M., and Croitoru, M., Thin Solid Films 126, 185189 (1985).Google Scholar
5. Meek, P.R. and Holland, L., Vacuum 34 (3–4), 411415 (1984).Google Scholar