Hostname: page-component-848d4c4894-mwx4w Total loading time: 0 Render date: 2024-06-26T22:22:25.059Z Has data issue: false hasContentIssue false
  • English
  • Français

Photo-Polymer Wafer Bonding for Double Layer Transfer

Published online by Cambridge University Press:  02 August 2011

Vorrada Loryuenyong ,
Tim Sands  and
Nathan W. Cheung
Vorrada Loryuenyong
Affiliation:
Department of Materials Science & Engineering, University of California-Berkeley, Berkeley, CA 94720
Tim Sands
Affiliation:
Department of Materials Science & Engineering, University of California-Berkeley, Berkeley, CA 94720 School of Materials Engineering and School of Electrical & Computer Engineering, Purdue University, W. Lafayette, IN 47907-2036
Nathan W. Cheung
Affiliation:
Department of Electrical Engineering and Computer Sciences, University of California-Berkeley, Berkeley, CA 94720
Get access

Abstract

Temporary bonding is necessary for the two-stage transfer of thin films from one substrate to another while preserving the original orientation of the film. The process developed in this study uses an SU-8 photo-polymer both as a bonding material and as a delamination material for layer transfer. SU-8 was spun onto an optically transparent handle wafer (e.g., quartz or glass) and then bonded to the layer to be transferred. The processing parameters such as pre-baking temperature and UV exposure dose affect the bonding strength. UV curing of the SU-8 through the backside of the handle wafer could be performed to obtain the ultimate bond strength at low temperatures. A laser pulse from a KrF excimer laser (λ = 248 nm and λ = 38 ns) at a fluence of 50-150 mJ/cm2 was used to delaminate the SU-8 bonding layer to complete the layer transfer.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 768: Symposium G – Integration of Heterogeneous Thin-Film Materials and Devices , 2003 , G5.6
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Pan, C.T., Yang, H, Chou, S.C., and Chou, H. P., J. Micromech. Microeng. 12, 611 (2002).Google Scholar
2. Tong, G.Y. and Goesele, U., Semiconductor Wafer Bonding, Wiley, NewYork (1999).Google Scholar
3. Lorenz, H., Laudon, M., and Renaud, P., Microelectronic Engineering 41/42, 371 (1998).Google Scholar
4. Dentinger, P.M., Clift, W.M., and Goods, S.H., Microelectronic Engineering 61–62, 993 (2002).Google Scholar
5. Ghantasala, M. K., Hayes, J.P., Harvey, E.C., and Sood, D.K., J. Micromech. Microeng. 11, 133 (2001).Google Scholar
6. Krajnovich, D.J., J. Appl. Phys. 82, 427 (1997).Google Scholar