Hostname: page-component-848d4c4894-pjpqr Total loading time: 0 Render date: 2024-06-21T16:26:20.974Z Has data issue: false hasContentIssue false
  • English
  • Français

Phase Transition and Formation of TiSi2 Codeposited on Atomically Clean Si(111).

Published online by Cambridge University Press:  21 February 2011

Hyeongtag Jeon ,
Y. S. Cho ,
E. Y. Kang ,
J. W. Park  and
R.R. Nemanich
Hyeongtag Jeon
Affiliation:
Department of Metallurgical Engineering, Hanyang Univ. Seoul, Korea133-791
Y. S. Cho
Affiliation:
Hyundai Electronics Industries Co., Ltd. Icheon, Korea
E. Y. Kang
Affiliation:
Department of Metallurgical Engineering, Hanyang Univ. Seoul, Korea133-791
J. W. Park
Affiliation:
Department of Metallurgical Engineering, Hanyang Univ. Seoul, Korea133-791
R.R. Nemanich
Affiliation:
Department of Physics, North Carolina State University, Raleigh, NC 27695
Get access

Abstract

In this study, the phase transformation and the surface and interface morphologies of TiSi2 formed on atomically clean Si substrates are investigated. 200Å Ti and 400A Si films on Si(111) have been co-deposited at elevated temperatures (400°C - 800°C) in ultrahigh vacuum. The phase transition of TiSi2 is characterized with using XRD. The results distinguish the formation of the C49 and C54 crystalline titanium silicides. The surface and interface morphologies of titanium silicides have been examined with SEM and TEM. A relatively smooth surface is observed for the C49 phase while a rough surface and interface are observed for the C54 phase. The islanding of the C54 phase becomes severe at high temperature (800°C). Islands of TiSi2 have been observed at temperatures above 700°C but no islands are observed at temperatures below 600°C. For films deposited at 400TC and 500°C, weak XRD peaks corresponding to TiSi were observed and TEM micrographs exhibited small crystalline regions of titanium silicide at the interface.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 311: Symposium O – Phase Transformations in Thin Films–Thermodynamics and Kinetics , 1993 , 275
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Murarka, S. P., and Fraser, D. B., J. Appl. Phys. 51,350 (1980).CrossRefGoogle Scholar
2. d'Heurle, F. M., J. Mater. Res. 3,167 (1988).CrossRefGoogle Scholar
3. Beyers, R., and Sinclair, R., J. Appl. Phys. 57, 5240 (1985).Google Scholar
4. Butz, R., Rubloff, G. W., Tan, T. Y., and Ho, P. S., Phys. Rev. B30, 5421 (1984).CrossRefGoogle Scholar
5. Wang, M. H. and Chen, L. J., Appl. Phys. Lett. 59, 2460 (1991).Google Scholar
6. Vig, J. R., J. Vac. Sci. Technol. A3, 1027 (1985).CrossRefGoogle Scholar
7. Fenner, D. B., Biegelsen, D. K., and Bringans, R. D., J. Appl. Phys. 66, 419 (1989).CrossRefGoogle Scholar
8. Takahagi, T., Nagai, I., Ishitani, A., and Kuroda, H., J. Appl. Phys. 64, 3516 (1988).CrossRefGoogle Scholar
9. Jeon, H., Sukow, C. A., Honeycutt, J. W., Rozgonyi, G. A., and Nemanich, R. J., J. Appl. Phys. 71, 4269 (1992).Google Scholar
10. Holloway, K., and Sinclair, R., J. Appl. Phys. 61, 1359 (1987).CrossRefGoogle Scholar