Hostname: page-component-848d4c4894-4rdrl Total loading time: 0 Render date: 2024-06-16T04:04:00.605Z Has data issue: false hasContentIssue false
  • English
  • Français

Patterning of Gaas/AIGaAs Wafers by Focused Electron-Bear Induced Chlorine Etching and Subsequent Kbe Growth

Published online by Cambridge University Press:  21 February 2011

M. Taneya ,
Y. Sugimoto ,
H. Hidaka  and
K. Akita
M. Taneya
Affiliation:
Optoelectronics Technology Research Laboratory, 5-5 Tohkodai, Tsukuba, Ibaraki 300-26, Japan
Y. Sugimoto
Affiliation:
Optoelectronics Technology Research Laboratory, 5-5 Tohkodai, Tsukuba, Ibaraki 300-26, Japan
H. Hidaka
Affiliation:
Optoelectronics Technology Research Laboratory, 5-5 Tohkodai, Tsukuba, Ibaraki 300-26, Japan
K. Akita
Affiliation:
Optoelectronics Technology Research Laboratory, 5-5 Tohkodai, Tsukuba, Ibaraki 300-26, Japan
Get access

Abstract

In-situ patterning of AlxGa1-xAs (0≦x≦0.7) using a electron-beam (EB) and chlorine gas (Cl2) and the application to “In-Situ EB Lithography” are investigated. In this patterning method, an ultra-thin GaAs oxide is utilized as a resist film. The oxide resist prevents C12 gas etching of the underlying material and can be also patterned by an EB irradiation under a C12 pressure, which brings about selective etching of GaAs/AlGaAs layers. Etch rates of AlxGa1-xAs (0<x≦0.7) are 20-30 nm/min, which is almost equal to that of GaAs (20 nm/min). Using this technique of EB-induced patterning, a novel concept “In-Situ EB Lithography” is proposed, where the whole processes for EB lithography are successively conducted in a ultra-high vacuum multi-chamber system. An overgrown layer on a GaAs surface patterned by this “In-Situ EB Lithography” shows a good morphology.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 158: Symposium B – In-Situ Patterning: Selective Area Deposition and Etching , 1989 , 211
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ehrlich, D.J., Black, J.G., Rothschild, M., and Pang, S.W., J. Vac. Sci. Technol. B6, 895 (1989).Google Scholar
2. For example, Ochiai, Y., Gamo, K., and Namba, S., J. Vac. Sci. Technol. B1, 1047 (1983).Google Scholar
3. For example, Willner, A.E., Ruberto, M.N., Blumenthal, D.J., Podlesnic, D.V., and Osgood, R.M., Jr. Appl. Phys. Lett. 54, 1839 (1989).Google Scholar
4. Taneya, M., Sugimoto, Y., and Akita, K., J. Appl. Phys. 66, 1375 (1989).Google Scholar
5. Taneya, M., Sugimoto, Y., Hidaka, H., and Akita, K., Jpn. J. Appl. Phys. 28, L515 (1989).Google Scholar
6. Akita, K., Taneya, M., Sugimoto, Y., Hidaka, H., and Katayama, Y., J. Vac. Sci. Technol. B7(6), (to be published).Google Scholar
7. Taneya, M., Akita, K., Hidaka, H., and Sugimoto, Y., Appl. Phys. Lett. 56(1), (to be published).Google Scholar
8. Bartels, F. and Monch, W., Surface Sci. 143, 315 (1984).Google Scholar
9. Taneya, M., Sugimoto, Y., Hidaka, H., and Akita, K., (unpublished).Google Scholar
10. Contour, J.P., Massies, J., and Saletes, A., Appl. Phys. A, 38, 45 (1985).Google Scholar
11. Spring, A.J. Thorpe, Ingrey, S.J., Emmerstorfer, B., and Mandeville, P., Appl. Phys. Lett. 50, 77 (1987).Google Scholar