Hostname: page-component-848d4c4894-2pzkn Total loading time: 0 Render date: 2024-05-01T12:04:01.672Z Has data issue: false hasContentIssue false

Pattern Formation by Changing V/III Ratio During Growth of GaAs by Movpe

Published online by Cambridge University Press:  10 February 2011

Shashi Paul
Affiliation:
Materials Research Centre, Indian Institute of Science, Bangalore - 560 012, India
S. A. Shivashankar
Affiliation:
Materials Research Centre, Indian Institute of Science, Bangalore - 560 012, India
Get access

Abstract

Rode pointed out that periodically-disturbed surface morphology can occur on epilayers grown on slightly misoriented substrates. Johnson and Legg investigated Rode's prediction in Metalorganic Vapour Phase Epitaxy (MOVPE) of AIGaAs at fixed V/III ratio, but no report is available on the faceting as a function of V/III ratio in epilayers of GaAs grown by MOVPE. We have therefore investigated faceting, as function of V/III ratio, during the growth of GaAs by MOVPE at atmospheric pressure, and have found that faceting in epilayers, grown by MOVPE, is not only dependent on misorientation angle but also on the V/III ratio. These layers have characterized by optical microscopy, SEM, photoluminescence(PL), and Hall ineasuremwnts. Direct correlation between surface morphology and near-band-edge PL has been observed. Mirror-like smooth morphology was obtained at a relatively low V/Ill ratio (≈ 15); faceting occur as a ratio is gradually is increased to about 25 and beyond. On the basis of our study, we believe the dimensions of faceting on micrometer scale can be tailored by varying the V/III ratio. These patterns can be utilized in the fabrication of optoelectronic and transferred electron devices, large scale integration of the later being possible.

Type
Research Article
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Hiramnoto, K., Tsuchiya, T., Sagawa, M. and omi, K., J.Crystal Growth 145,133 (1994).Google Scholar
[2] Nötzel, R., Temmyo, J. and Tamamura, T., J.Crystal Growth 145, 990 (1994).Google Scholar
[3] Inoue, K., Kimnura, K., Maehashi, K., Hasegawa, S., Nakashima, N., Iwane, M., Matsuda, O., and Murase, K., J.Crystal Growth 127, 1042 (1993).Google Scholar
[4] Rode, D.L., Physica Status Solidi A32, 425 (1975).Google Scholar
[5] Rode, D.L., Wagner, W.R., and Shumaker, N.E., Appl. Phys. Lett. 30, 75 (1977).Google Scholar
[6] Johnson, E.S. and Legg, G.E., J.Crystal Growth 88, 53 (1988).Google Scholar
[7] Stringfellow, G.B., in Advanced Crystal Growth, Eds. P.M.Dryburgh, B.Cockayne and K.G.Barraclough [Prentice Hall, Cambridge, 1987] p.289.Google Scholar
[8] Tsui, R.K., Curless, J.A., Kramer, G.D., Peffrey, M.S., and Wicks, G.W., J.Appl. Phys. 59, 1508 (1986).Google Scholar
[9] Reep, D.H. and Ghandhi, S.K., J.Crystal Growth 61, 449 (1983).Google Scholar
[10] Ven, J. van den, Schoot, H.G., and Giling, L.J., J.Appl. Phys. 60, 1648 (1986).Google Scholar